Ackerprinz HD zonbifilimi

Front weight is not the biggest for the 1050 it's only a 2.5 tonne one.

hallfastrac aka canola

mataiterapreha .

spokojnie możesz podpiąć c330

Sądzę że c330 mogła by mieć problem

Chyba że 330m to już tak

and they added that crane to it!!

well the 1050 aint cheap either :D

Tylko, że to jest Focus do uprawy bezorkowej ;) W naszych regionach, to takiego Focusa 6TD ciągnie John Deere 9630.

A w jakim regionie Polski można zobaczyć takie zestawy?

Północ

Nie zmienia to faktu że siewnik ma zapotrzebowanie na moc ok 300-400 km więc powinien lekko z nim chodzić, a tak nie jest ;)

Napiszcie na YT nazwę siewnika i zobaczcie jakie maszyny z nim chodzą

300-400 hp is recommended for the seeder. The seeder does some serious deep cultivation which requires a bit of power. So 500 hp is overkill but you use what you got. :)

Shawn Conrad Depends on the ground that it will be used on as to whether or not it is overkill, the type of ground makes all the difference

That's not that much weight on the front when you consider the over weight of the rig we normally send them out with 3300 kg and 1250kg rear wheel weights. You need weight on the front to aid traction particularly with dual wheels as you surface area of tread has increased so the down force has decreased. The back has to a point got part of the weight of the implement to add ballast. It's a balance between not compacting the ground too much but at the same time having the grip to put the 500hp down to the ground.

ikke det der ligner

Martin Andreasen 6