Fendt - Claas - ++ / Holz Häckseln

Fendt - Claas - ++ / Holz Häckseln - Wood Chopping 2020

Рет қаралды 102,474

3 жыл бұрын

Teil 2 ; Hier sieht man Lu. Blunk mit einen Fendt 1050 und einem Jenz Hem 593 beim Holz hächseln. Für den Transport sind verschiedene Fendt und Claas Traktoren mit Krampe Kippern im Einsatz. Viel Spaß beim anschauen des Videos.
Part 2 ; Chopping wood by a local contractor with a Fendt 1050 and a Jenz Hem 593. Various Fendt and Claas tractors with Krampe tippers are used for transport. Have fun watching the video.
Bitte auf 1080p wechseln / Please change to 1080p
Wer meinen Kanal unterstützen möchte, kann dies über diesen Link, vielen Dank-If you want to support my channel, you can do so via this link, thank you: www.paypal.com/cgi-bin/webscr...
Kommentare die unhöfliche, beleidigende, hasserfüllte, feindliche oder negative Bemerkungen enthalten , werden ausnahmslos gelöscht und in schwerwiegenden Fällen auch KZfaq gemeldet!!!
Greets der Kanalbetreiber
Any comments that contain rude, offensive, hateful, hostile or negative comments will be deleted without exception and in serious cases also KZfaq reported!!!
Greets the channel operator
Equipment:
Sony Cyber-shot DSC-RX10 Mark IV Info: Einstellung 100 fps bei 100 mbit/s
Panasonic Lumix DMC - FZ 2000EG
Info: Einstellung All Intra
Sony FDR - X 3000R Actioncam
Lexar Professional 1800x MicroSDXC UHS-II
Rode Videomicro / Richtmikrofon
Verschiedene Filtersystheme
Walimex Pro und Walimex FT 1502 Einbeinstative
Hama Dreibeinstativ

Пікірлер: 67

@Agriculturespotter 3 жыл бұрын

Nice video Stefan!

@landtechnikmv-agriculturalvide 3 жыл бұрын

Thank´s a lot Jan. Greets Stefan

@VolmerFilm 3 жыл бұрын

Schöne Maschinen!

@landtechnikmv-agriculturalvide 3 жыл бұрын

Vielen Dank. Greets Stefan

@agrartechnikmv 3 жыл бұрын

Solche Videos sind auch immer interessant klasse Stefan Gruß Marko

@landtechnikmv-agriculturalvide 3 жыл бұрын

Danke dir Marko. Greets Stefan

@Pauldeere04 3 жыл бұрын

Tach Stefan wieder geiles Video was der da so durch schiebt ist schon wahnsinn 🙈

@landtechnikmv-agriculturalvide 3 жыл бұрын

Moin Paul, das stimmt, der muß das Maul ganz schön weit aufreißen. Greets Stefan

@Pauldeere04 3 жыл бұрын

@@landtechnikmv-agriculturalvide jo so siehst aus 😅

@svengranzow3702 3 жыл бұрын

Moin Stefan coole Aufnahmen vom Holz schreddern solch ähnliches Gespann fährt hier auch bloss mit Lkw gruss

@landtechnikmv-agriculturalvide 3 жыл бұрын

Moin Sven und vielen Dank. Greets Stefan

@svengranzow3702 3 жыл бұрын

@@landtechnikmv-agriculturalvide Moin Stefan bitte schau mal bei Wood pimper die haben bei euch den Sitz gruss

@juanpedrogarcialopez2599 3 жыл бұрын

Muy bien 👍😃 como siempre Stefan 👌

@landtechnikmv-agriculturalvide 3 жыл бұрын

Muchas Gracias Juan. Greets Stefan

@ClassicJaggy 3 жыл бұрын

Nice video

@landtechnikmv-agriculturalvide 3 жыл бұрын

Thank´s a lot. Greets Stefan

@ArchersView 3 жыл бұрын

Good video & excellent machine!

@landtechnikmv-agriculturalvide 3 жыл бұрын

Many thank´s Ryan. Greets Stefan

@WilliamB161 3 жыл бұрын

Amazing video

@landtechnikmv-agriculturalvide 3 жыл бұрын

Many thank´s William. Greets Stefan

@christiankrabbel3302 3 жыл бұрын

Hallo Stefan 😁 Es war ein sehr schönes Video.👍🤗 War sehr Interessant.✊😄💪

@landtechnikmv-agriculturalvide 3 жыл бұрын

Moin Christian, das fand ich auch, war auch das erste mal das ich das so filmen konnte. Greets Stefan

@damianpreston3389 2 жыл бұрын

you all probably dont give a damn but does any of you know of a tool to get back into an instagram account?? I somehow lost my password. I would love any tricks you can give me

@randallbeckett2366 2 жыл бұрын

@Damian Preston Instablaster ;)

@damianpreston3389 2 жыл бұрын

@Randall Beckett i really appreciate your reply. I found the site on google and im in the hacking process now. Seems to take a while so I will reply here later with my results.

@damianpreston3389 2 жыл бұрын

@Randall Beckett it did the trick and I now got access to my account again. Im so happy:D Thanks so much you saved my account :D

@pavelkubes1 3 жыл бұрын

Very good video Stefan.

@landtechnikmv-agriculturalvide 3 жыл бұрын

Many thank´s Pavel. Greets Stefan

@fabiandeser5519 3 жыл бұрын

Echt sehr cooles Video 😁👍

@landtechnikmv-agriculturalvide 3 жыл бұрын

Vielen Dank. Greets Stefan

@FlyingPixelsPhotography 3 жыл бұрын

Nice video 👍🏻

@landtechnikmv-agriculturalvide 3 жыл бұрын

Thank´s a lot. Greets Stefan

@Marcvandenenden 3 жыл бұрын

Hallo Stefan, Mal etwas anders! 📽 Die Jungs von Blunk! 👍 Schöne Grüße Marc!

@landtechnikmv-agriculturalvide 3 жыл бұрын

Moin Marc, muß auch mal sein. Greets Stefan

@balmesh 3 жыл бұрын

Very nice, Stefan. Must have been quite noisy, too!

@landtechnikmv-agriculturalvide 3 жыл бұрын

Thank´s a lot Alan, that´s true but really interesting to see. Greets Stefan

@JDrostAgricultureVideoNL 3 жыл бұрын

Good video, greetings Johan

@landtechnikmv-agriculturalvide 3 жыл бұрын

Many thank´s Johan. Greets Stefan

@tommydrozdowski4733 3 жыл бұрын

Very interesting!

@landtechnikmv-agriculturalvide 3 жыл бұрын

Thank´s Tommy. Greets Stefan

@MrPummi88 Жыл бұрын

Mit der Motorsäge bei der Fällung ein paar Schnitte mehr, und das ganze geht viel einfacher und schneller...

@landtechnikmv-agriculturalvide Жыл бұрын

Da kann ich nix zu sagen, kenne mich nicht aus damit. Greets Stefan

@LandwirtschaftForstwirtschaft 3 жыл бұрын

Cooles Video Stefan! 🙋🏼‍♂️ Gruß Richard!

@landtechnikmv-agriculturalvide 3 жыл бұрын

Moin Richard und Dankeschön. Greets Stefan

@robhase2154 3 жыл бұрын

Profis fahren Eschlböck.....

@landtechnikmv-agriculturalvide 3 жыл бұрын

Eschlböck sagt mir nicht mal was.

@CarlosGonzalez-kt5be 3 жыл бұрын

How you doing stefan, I see the machine hop problems and the beginning , when the mechanic opens en checked, work good, thanks you for the vidio.. sal.des.new yorkc,

@landtechnikmv-agriculturalvide 3 жыл бұрын

Thank´s a lot Carlos, stay healthy. Greets Stefan

@ronaldbrunner2388 3 жыл бұрын

Der nimmt selbst die dicksten Dinger !

@landtechnikmv-agriculturalvide 3 жыл бұрын

Na, wenn das nicht zweideutig ist ;)). Greets Stefan

@christopherlovelock9104 3 жыл бұрын

Greetings Stefan. I do think some people get machinery to try to do a little bit more than it is intended to do. I mean at 8.50 that trunk to my mind was a bit too much, for a start they could have cut the branch parts off a lot closer to the trunk. Personally I'm just surprised it didn't give up altogether or at the very least wreck the cutters. Good video all the same, - Stay Safe - Cheers Chris.

@landtechnikmv-agriculturalvide 3 жыл бұрын

Thank´s Chris, If you never push a work machine to its limit, you've probably bought too big. Greets Stefan

@christopherlovelock9104 3 жыл бұрын

@@landtechnikmv-agriculturalvide Greetings Stefan. I see your point exactly, but their comes a time when you can push any machine over it's limit, - and that's when accidents happen, - if it's intended to take 9" trunks you can be hardly surprised if it breaks having pushed it to it's limit year after year. Like everything it wears out. - Cheers Chris.

@Imholze Жыл бұрын

In fact, it does exactly what the machine is built for. he could have turned the feed down a bit, but was probably too uncomfortable to put it politely. But the shredder regulates the feed independently if the counteracting forces are too great. And straight root wood and/or wet wood, as shown here is also more difficult to work with. But the feed was probably a bit too high. Edit: However, the loading can also be determined by the desired size of the wood chips. in conjunction with the hole pattern used to determine the size. The size of the cutter head (and thus the number of knives) can also be the limiting factor. Maybe that was just the way it worked.

@christopherlovelock9104 Жыл бұрын

@@Imholze - Agreed, - a touch less speed wouldn't have done any harm, (especially to the cutters). If you want a machine to last, you 'feed it', - as in this case the size of log/tree it was intended to take. If you continually push them above 'design size' something will break, - sooner, rather than later.

@jordyvdvecht7566 3 жыл бұрын

Hallo Stfan, ich habe eine Frage, ich fahre mit dem Fahrrad an einer Holzauffrischerfirma Kemp vorbei und ab und zu muss ein Innenholz verschwendet werden, einmal ist es eine Traktormarke Valtra und manchmal gibt es einen Mann-LKW, wenn sie wieder beschäftigt sind Holz werde ich das Video nach dir senden oder wenn ich kein Interesse daran habe

@landtechnikmv-agriculturalvide 3 жыл бұрын

Danke, aber ich muß dir sagen, das ich kein Fremdmaterial verwende, aber du kannst es doch auf deinem Kanal hochladen.