Tom you really are a perfect match for Colin, so it's fate that you would know each other and get on. You have that cheeky exuberance and are a natural in front of the camera, and I know how hard that is for most people. So keep the videos coming, and we'll all keep watching them.

Kudos to whoever made that push bar, great bit of welding.

Love how Uncle Massey and little brother valtra Help Grandfather Fendt 😁🥰

Not all heroes wear capes. Some wear faded JCB hoodies 😁😁 Sheeet thats a big hole. Bet that made a right racket. Gonna be painfull on the wallet too 🙈🙈

Great rescue Tom I wouldn't want that repair bill 😮😮😢😢

Dam that hitch up was well too smooth, I aspire to come to such a level, not the easiest nowadays when u have to lean half way way out the back window to see and then ur new tractors will go in to park as safety bc ur not on the seat🤣

More stuff like this tom lad 😁 Keep it coming 👍

Wow, I have never seen this kind of damage 😮😮😮

Tom Lamb recoveries to the rescue!

That bar doing the pushing up the bed is the real MVP here , obviously after you Tom :D

Was the engine shut off in time? I’d imagine

We had someone do that in our 399 one silage time, freewheeling down hill with it in 4wd, luckily the front linkage brackets stopped the propshaft doing too much damage.

So I am not familiar with this new of equipment but you mentioned that the "Front axle seized up and the drive shaft then broke destroying the oil pan and everything else. If the front axle seized up them front wheel and tires seemed to be rolling fine getting it on and off the trailer. Mabe I am just misunderstanding your terminology

Well handy that trailer, I hope they managed to get all that mess sorted. Could you let me know. I was driving a 18t flatbed back to the yard when I heard a steady ryhmic banging from the rear axle. I jumped out of the cab torch in hand fearing the worse. I checked the props, centre bearing and all that I could prod and point at so to speak. Turned out to be a house brick wedged between the near side dual tyres. Did sound bad from inside the cab. Broke it up with a few angry taps with a hammer and was then on my merry way....

Great video!

' Time for new engine. " Deep pocket.

I drive a fendt 822 for work and have had many 4wd issues, if any hydraulic or electrical issues occur the tractor defaults to 4wd no matter what speed your doing, if you don’t have your music blaring you can hear the front axle whining at high speeds, I’d say something similar happened here, something as simple as a solenoid failing can lead to this if not noticed in time.

Going to take a bit of sorting out wonder if the engine is OK.

Is there any point in putting a winch on the Bailey trailer deck like the tow trucks have? Use dyneema rope on the winch and give the pusher tractor an assist.

I think it's time to watch the drag racing guys. Two simple cardan rings had saved the owner a great deal of mone

tom must be in the dna of the lambs iam paul lamb from the north west of england not from farming. from hgv recovery. keep up the good vids

Drifting cars have metallic loop at both ends of the shaft to catch it if I fails. Not a bad idea for a tractor too.

That Cardin shaft hasn't even got a centre bar!

Did it get a hard life? Looks like it didn't get much maintenance.. some amount of damage wow..

Heck! Busy road

She’s filthy under there. And that 8s ❤

Tom, That 8S is one sweet tractor! In your experiences in farming, what crop/s appear to be the most profitable? You shall have a fine night, good sir.

Typical fendt quality kubota number 1

That looks expensive.

A smashing time for a rather bent Fendt!

Looks like AGCO meetup :D

Interesting what caused that or was it general prop failure?

Oh that one sick tractor. If she not red ❤️ leave her in the shed .

Hello Camshaft, Hello prop shaft, I haven't seen you before

Farmer Tom Lamb helping turn the internet up to 11. 👍

Seems nothing left of the sump - did it completely shatter into pieces and fall away? Odd?

Wonder if he was doing 65k in 4wd

Maybe Grab 3 or 4 Hi Viz Vests for those Night time jobs - keep yurselves seen n safe buddy. A couple o Head band Torches hanging round the Shifter can come in real handy also

Lack of oil/grease on that bearing!

Is a bad day with traktor. Sweden

4wd engaged and a big trailer?

At least it wasn’t a fergie, I couldn’t stand that.

So how much was the repair bill?

😮

wrong tires ?

Imagine if the police we're involved, road closed and none of that would be moving for hours 😂much better to handle it yourselves!

That crankshaft seeing that crankshaft was like holy crap

ouch!

My little MF 135 couldnt fit a trailor that quick LOL

Ooh its Th Driveschafts gone!!!!!!!!!!

Teamwork

Lockers still on when driving on the road?

What was it doing in 4WD?

👏👏👏👏👏👏👌👍

Free wheeling and Selected a Gear that is why and would have had the brakes on So in 4x4 Game Over 😂🙈🥵 Top of the Class 😅

Were the tyres even rated for that speed?

Winch on the trailer would be easier and safer

Przyjechał już do Polski????

40kmh model or frontweel drive on?

on any sophisticated piece of machinery you have to look at your levels minimum once a month , its to costly to rely on lazyness

Men gets in with shoes 😂 my lord not your own I guess

I've got a question, totally diffrent, where can i order such plugs for air breaks? Never seen such, and the ones we use in Poland drives me nuts.

That's why you don't drive with 4wd on the road...

2 Agcos rescuing an Agco effectively.

Tremendous Force she broke with don’t ya know! 👍

I'd ask Santa for a winch for the trailer.

Job well done 👍 bet fendt will pass blame back to farmer there good with excuses

What they Massey 8s like?

Too bad all the Pringles fell out the tube

Is that road connected between 2 capitals??

In the US a 300 hp fendt is only a couple thousand dollars more than a Newholland t8. I don’t see the hype of them.

A perfect lesson on why if you want to go over 40k you need a fastrac, not a fent

What a concept. Lighting and brakes on large towed equipment…🙄

Probably a write off

should got a same

Blew a new Massey 8s with 80 hrs the other month

but how did the steering work with the engine off?

Ouch that's gonna be a £20k repair?

deport who ever did this

Instructions say to grease the joints every use. If you did that. You would of seen lose bolts or other issues.

I will keep my American made caseih thankyou.

Not exactly a shining endorsement of Agco, eh? With a tractor that expensive, you'd expect that stupid stuff like this wouldn't happen. Massey is part of Agco as well. Be worried... Be very worried... lol They make New Holland look good, and that's *really* saying something.

I’ve ran older tractors all my life, when I saw that moveable hitch and how slick that was to hook up the trailer the first words out of my mouth were “F*** you” awesome video man

Hollow prop shaft! some of those tractors cost 250,000 pound

Change your oil based on engine hours not miles. You listed the miles the post so i know you shouldn't be operating equipment. Miles are for the axes and wheels.

German Engineering Once Again At it Best,Buy British Tractors instead of Overpriced Junk

Would it be standard operating practice from a Health and Safety point of view, to allow live traffic to flow past in very close proximity, just at the most dangerous point of the loading procedure? If that bar connecting the two tractors fails as the Fendt is being pushed up the ramp, you have a very heavy unmanned tractor that can easily roll out into live traffic, and I'll leave the rest up to your imagination. Leaving aside Chapter 8 or H&S, surely it's just common sense that you don't place unsuspecting members of the public in danger due to your actions? I appreciate that you weren't necessarily the one in charge of Traffic Management at the location, but you could have insisted on all traffic being stopped for the two minutes it took to load the Fendt? Query comes from a place of genuine concern - not trying to be a pedantic tosser or troll.

No police in attendance to control traffic I see, too busy drinking tea and eating kebabs

😮