Ferrari 308 Window Regulator Fix - OMG!! What A MESS! - DIRT ROAD Ferrari 308QV Ep#3
Рет қаралды 14,850
3 жыл бұрын#Ferrari308 #FerrariProject #Ferrari308WindowRegulatorFix
Ferrari 308 window regulator ; Ferrari slow window ; Ferrari 308 window fix ; Ferrari 328 window fix
Ferrari 308 QV Euro ; Ferrari 308 Project car ; Ferrari 308 Suspension
Hi Everyone, Today we tackle the window regulators on the Ferrari 308. Oh my... The windows are soooo slowwww... There is a good reason for that! The grease used back in the day turns to glue over time and nothing can move. Today's project is to remove the regulators, disassemble and clean them thoroughly. Then re-lube and re-install. The job took a few evenings, but is well worth it!
Help support our channel and become a patron:
/ heidiandfrannysgarage
For Correspondence:
Heidi and Franny’s Garage
P.O. Box 17003
Golden, CO 80402
T-shirts and other clothing:
Merchandise:/heidiandfranny.storenvy.com/
Amazon Store Page
www.amazon.com/shop/heidiandf...
Facebook Page: / heidi-and-frannys-gara...
Instagram: heidiandfra...
Twitter: / heidifranny
Website: www.heidiandfrannysgarage.com
The Cameras and Equipment we use:
Main Shooter:
Panasonic Lumix G85 (goo.gl/geSFpN)
Main Shooter Lens: (goo.gl/RsHkkF)
Main Shooter Microphone:
Rode RodeLink FM Wireless Filmmaker System
goo.gl/aQsmrg
Car Cameras:
Sony FDR-X3000 (goo.gl/P6XdYZ)
GoPro Hero 7 black (amzn.to/3dph4cB)
Car Mounts:
Fat Gecko Camera and Camcorder Mount (goo.gl/zqCHvT)
Fat Gecko Camera Mount (goo.gl/AXQAr6)
Fat Gecko Mount (goo.gl/RhyXYT)
Drone:
DJI Mavic Pro and Kit (goo.gl/jQbk9V)
Stabilizer for mobile phones and action cams:
DJI Phone Camera Gimbal OSMO MOBILE, Black (goo.gl/Acr1jg)
Disclaimer:
Due to factors beyond the control of “Heidi and Franny’s Garage”, We cannot guarantee against improper use or unauthorized modifications of this information. “Heidi and Franny’s Garage” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “Heidi and Franny’s Garage” recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of “Heidi and Franny’s Garage”, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not “Heidi and Franny’s Garage”.
Music provided by Artlist.io
Music in bumper provided by:
BACK IN SUMMER by Nicolai Heidlas Music / nicolai-heidlas
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons.org/licenses/b...
Music provided by Audio Library • Video
Hat's worn by Heidi and Franny provided by: www.Fabkittenhats.com
Automotive and Car Channel - How To (DIY):
Porsche, Ferrari, MINI, General Car Maintenance
@wernerdanler2742 2 жыл бұрын
I had just as much fun watching this a second time as I did the first.
@soonerlon 2 жыл бұрын
Number one - it's great to see females as auto techs - I think the industry needs many, MANY more! For 39 years, I was an aircraft engineer in the aircraft overhaul business. On one of the engines we rebuilt, when we split open the main gearbox, there was always one bearing whose outer race would move while in service. We talked to the factory engineers about it and they were convinced it was the bearings "looking for their proper place". So, when you talked about the bearing blocks supporting the worm gear drive "finding their place" you're absolutely correct. Great job!
@mkalamo 3 жыл бұрын
Boring??? More like fabulous! I would have watched the driver’s side too. Well done!!!
@kennyray116C 2 жыл бұрын
You are my hero! This channel should be on TV... Seriously. It's so well made. I love it!
@HeidiandFranny 2 жыл бұрын
LOL! Thanks so much!
@Alexi7666 2 жыл бұрын
I wish I had one-tenth of your patience and perserverance. Amazing work.
@RichieRich845 3 жыл бұрын
Hi Franny, well done, I would also lubricate the window channels with some silicon spray too.
@mandymcgill9503 3 жыл бұрын
Hidi clean the groove the black rail that window sit in it will go up faster ...love the video
@douglasmccowen27 2 жыл бұрын
One of the best videos on this job that I have ever seen. I need to do this on my 308 GT4, so thanks a bunch.
@markdaugherty6378 3 жыл бұрын
It was one of your best, time for you to consider an episode that exposes German engineering vs Italian engineering. I certainly have my opinion but would love to hear yours. Great graphics once again.
@HeidiandFranny 3 жыл бұрын
That's a great idea! Both have their ups and downs.
@BKKKevin 2 жыл бұрын
Love your videos!… Every time I get an urge to buy a classic sports car all I have to do is watch one of your videos to walk me down off the ledge…
@darrellsimpson6966 2 жыл бұрын
What an improvement. Great presentation. Almost looked easy.
@ronniemeyhoff8306 3 жыл бұрын
These Ferrari episode on the channel is awesome👍💪
@HeidiandFranny 3 жыл бұрын
Yea!! Thanks so much!
@geerstyresoil3136 3 жыл бұрын
When I get my ferrari one day, my mechanic will fix these. lol
@weets69 Жыл бұрын
Great job and vid. After watching, I know I would been throwing tools all over the shop in frustration if I was doing this repair😎
@jake-hy2zb 3 жыл бұрын
You certainly have more patience than do. On the older American cars, they have the problem of not having enough power to the motor. Many times the only fix is adding a relay but that would not be correct in this case. It should be done as you have using proper maintenance. Excellent attention to detail. Congratulations.
@HeidiandFranny 3 жыл бұрын
Thanks Jake, yup,... I think the worst of it is the wiring and bad connections. It is working, but I'm sure would be better with better power and grounds.
@johnblunt1834 3 жыл бұрын
Back in the day (when I was younger ;-) ) The Italian motor/motorcycle Industry had a bad reputation for their electrics. Your brass (or bronze) shaft bearings are probably a legacy from those times. Everything is much better now. The electrics doubts caused the biggest purchase mistake I ever made. A Triumph bonniville when I was considering buying a 1976 Ducati 900 ss.
@dashin96 3 жыл бұрын
Never thought I’d be so enthralled by a video about a window regulator. I especially loved the annotations outlining the path of the cable. Looking forward to the rest of the videos!
@bruces12 3 жыл бұрын
The window cables looks like something Rube Goldberg would have invented! Great how you got it all sorted out.
@HeidiandFranny 3 жыл бұрын
It is a bit nutty ;)
@billswim 3 жыл бұрын
Blueprinting a window regulator transmission! Well done
@julianosante7134 3 жыл бұрын
LOVE Future Franny!!! So much wiser & smarter than Present Franny. Then again, that applies to all of us ;-) Loved the video. Lucky car, it's got a great pair of owners who'll keep it on the road in great shape and for many years to come.
@HeidiandFranny 3 жыл бұрын
LOL! Present Franny can be a bit slow ;) We'll try to have her on a bit more often. I know it would save me a bunch of work :)
@georgem5589 3 жыл бұрын
I'm not a mechanic but I'm glued to these vids. Thanks.
@plymouths1 3 жыл бұрын
I don't even own a 308, but am hooked on watching your channel , your a awesome technician .
@HeidiandFranny 3 жыл бұрын
I appreciate that! :) Thanks!
@backyardprojects9945 3 жыл бұрын
Thanks for going to great effort in putting together this vid, easy to follow your instructions. 80's Alfa GTV6s have a similar system (cables) and are prone to slow opening and closing action. I have being putting off doing this job on my '84 GTV6, but now feel I can tackle it. Lots of transferrable skills in vid. Good idea to take lots of photos, a video?, and labels. It's mid winter in Melbourne Aust and our 5th covid lockdown, time to head for the garage and start pulling apart the driver side door. Thanks again F & H.
@FixinBugsNStuff 3 жыл бұрын
I like the jegs cleaner. I may order one. I normally degrease like you with the small containers.
@SimonatMac 2 жыл бұрын
Another great instructional video. Thanks, girls. ❤️
@cp4512 3 жыл бұрын
Great job 👍
@jrgenfriborg3508 3 жыл бұрын
One’s agin super job bravo.
@straightbusta2609 3 жыл бұрын
This car has aged beautifully
@HeidiandFranny 3 жыл бұрын
It really has. It has been really dry through it's life and that totally shows.
@graham6229 3 жыл бұрын
@@HeidiandFranny I know the feeling.
@NekoWinters 3 жыл бұрын
It's a great day when you work on the only Ferrari I've agreed with my husband to put on our bucket list (currently on a AE86 Corolla, and hunting for an early boxster to dip our toes into the world of porsche rebuilding... )
@wernerdanler2742 3 жыл бұрын
Good job Franny! I think that's the most complicated window mechanism I have ever seen. My mercedes rear windows are cables. It just basically looks like a violin bow and has a little plastic thing attached to the cable that fits into a slot at the bottom of the glass. It is held on the door with four rivets. The front though are a scissor mechanism and held in with about 9 rivets. I would have used silicone grease on that mechanism. I think it will hold up better. You might spray some silicone spray where the window rides up and down on the front edge. Might help a little. I spray it on mine every so often to make it run a little easier. Ciao!
@misterfeedback202 3 жыл бұрын
Great video. So detailed and I liked the visuals with the dots.
@HeidiandFranny 3 жыл бұрын
Thanks! :)
@bryantmoravek4491 8 ай бұрын
Well done, young lady. You're more courageous than I. I think you could have mixed jet fuel easier than this job...
@franwoon 2 жыл бұрын
Brilliant video! Have been meaning to do my 308 GT4 for ages - your video has given me the courage to!!
@mikedemasi4100 9 ай бұрын
Another great video, I have done this after watching you. I also found quite a bit of grease on all the pulleys that were stopping it from moving smoothly too. Thank you.
@michelecrown2426 3 жыл бұрын
You have a crazy amount of patience. No way could I have fiddled with all that without wanting to tear my hair out. Great job.
@HeidiandFranny 3 жыл бұрын
Well,... Ya see... There where these times when... lol!
@michelecrown2426 3 жыл бұрын
@@HeidiandFranny I wouldn't doubt that hardened grease was Nutella :)
@eugenebaroni1298 3 жыл бұрын
Wow great video. Cool how u go back to the future. Have a great rest of your week...
@HeidiandFranny 3 жыл бұрын
Well, we are installing a hover conversion as well... Doc Brown is a good friend ;)
@pjcliffo 3 жыл бұрын
I did a similar job on a Mazda 929 about the same vintage and a similar system. Mazda wanted like a $1000 to replace the whole system instead I did it myself. They use a small plastic drum that the cable winds around and it had broken. Initially they refused to sell the part separately but after I pressured them they sold it to me for $30 but warned me it’s not repairable. I basically did what you did, pulled apart cleaned lubed and reassembled and it worked perfectly! $30 instead of $1000 and I felt very pleased at giving it a go. Love your videos, cheers.
@HeidiandFranny 3 жыл бұрын
Oh, that's awesome!! Great job! That is really interesting that Mazda used a system like this. Huh... Maybe it is more common than I thought.
@wernerdanler2742 3 жыл бұрын
@@HeidiandFranny Maybe one stole the idea from the other. I just wonder which one it was that did the stealing? Mmmmm lol
@MrOboe-ry5gm 3 жыл бұрын
Thanks Franny! You always have great content I learn so much from you - I honestly thought you had more 10x more subscribers than you have. All of you reading this who appreciate the content as I do please email your friends to let them know this is some high quality stuff. I'm sure there is at least 1000000 car nuts out there!
@HeidiandFranny 3 жыл бұрын
Thank you. We are in a special niche of classic cars, and that content, sadly, is not nearly as popular as the newer cars. Heidi
@johnjobber2219 3 жыл бұрын
Wow nice job. Glad I got a new window regulator with motor for $38 for my Tahoe and installed it in under 1 hrs. Had no idea it could ever be this difficult.
@maidenrulz73 3 жыл бұрын
These vids are going to be great when I get my very own 308.....I already talked to my wife and I think the chances are a solid 5/10
@graham6229 3 жыл бұрын
Get a Porsche 911 mate
@maidenrulz73 3 жыл бұрын
@@graham6229 no way sir......it’s the 308 for me
@stuartmoles843 3 жыл бұрын
Always interesting, the 1/4 light channel may need cleaning / adjusting to get it even smoother
@freerkderuiter8822 3 жыл бұрын
That is quite an interesting mechanism. In principle it's not that difficult, but in practice there's a lot that can go wrong. With the grease that hard I'm surprised the window was moving at all, or that the motor didn't burnout. Love the hidden door release under the armrest. Looking forward to the next installment. A solid 10/10 again, Franny, to paraphrase Nick Murray (sorry, couldn't resist)
@HeidiandFranny 3 жыл бұрын
Thanks so much Freerk! I agree it is pretty straight forward, but... Then again, these cars weren't really expected to live 25, 30, 35 years. It is amazing they are doing so well today. Thanks again :)
@PhilUKNet 3 жыл бұрын
Considering how hard that grease had set I'm surprised the regulators were working at all!
@HeidiandFranny 3 жыл бұрын
Totally! The only bit that wasn't rock hard was the tiny part that was on the worm gear. ...and it was like uncured epoxy!
@PhilUKNet 3 жыл бұрын
@@HeidiandFranny Franny, I also appreciated the illustration that you did. I know how time-consuming this stuff can be. Probably a lot of people don't realise that making a fairly short video can take a whole day or more. Your efforts aren't going unnoticed!
@jjnitzh1 3 жыл бұрын
@@HeidiandFranny I'm assuming you did, but you did lube the pivot pulley axels, the tracks and sliders for the glass?
@jjnitzh1 3 жыл бұрын
@@PhilUKNet Ditto! Greatly appreciate diagrams. Really made understanding the layout clear.
@hkr667 3 жыл бұрын
@@PhilUKNet Not only that, the editing on all of their videos is near perfect.
@bwhalen77 Жыл бұрын
am doing this right now on my 82. thanks for the cable stringing notes. i keep telling myself i should look you guys up when im in colorado!
@HeidiandFranny Жыл бұрын
We do not live in Colorado anymore.
@ssarkees 10 ай бұрын
Ugh! I just did this job on my '85 Mondial QV Cab, and getting that cable spooled correctly on the motor was a 2-3 hour pain. BUT - they work great now! I even added the accelerator kit.
@joanneshellings5457 3 жыл бұрын
Whaaaww! This is so well explained and documented. Absolutely top video again. Cheers from Belgium 🇧🇪
@maxandfergus 3 жыл бұрын
This is very helpful. Thanks. I'm a bit terrified of not being able to get the cable back wound properly.
@HeidiandFranny 3 жыл бұрын
That strangely isn't that important. By the time you re-string it back up in the car it has loosened on the spool and is a bit of a mess. But, never fear, it will right itself once you run it up and down a couple times. There is one caveat - you have to make sure the initial wind doesn't cross over itself on the spool. After that and you have it assembled you are good. That was the slight crunching noise you heard when I ran the cable up and down the first time. After a couple runs it was good and I could take the rest of the slack out. It is actually less scary than it seems. Also make sure the cable is on the pulleys and not behind them. There was some fuss with the alignment of the window clamps on the cable. Just work with it until it doesn't bind. Might want to keep your battery on a tender ;) Good luck!
@WilliamAndrewPhilipBodie 3 жыл бұрын
I really love the detailed work and explanations you put in to it. :_:
@HeidiandFranny 3 жыл бұрын
Thanks so much!
@WilliamAndrewPhilipBodie 3 жыл бұрын
@@HeidiandFranny For what ??? I'm the one to Thank you :_:
@marcusd2380 3 жыл бұрын
@@WilliamAndrewPhilipBodie I agree the time and effort for each video must be crazy. You can see there is prep fir each video and plenty of research before starting. I enjoy and learn so much from them
@jamesstenhouse4113 3 жыл бұрын
As always, another thorough and succinct episode. Cheers from the Canadian Rockies.
@josbar313131 3 жыл бұрын
I love the way you film and show these works!!!!!
@OpenRoader Жыл бұрын
I have been subscribed for some time and have really enjoyed your content. This could be one of your very best videos. I am about to do this job on my car and I have dreaded it for the last 15 years I've owned my car. THANK YOU so much for all the details. TOP TEIR WORK! Cheers
@HeidiandFranny Жыл бұрын
Glad the videos are helpful!
@Markturnbull1971 9 ай бұрын
Hey Franny, just thought I’d take the time to express my thanks for this video, it was the tipping point in giving me the confidence to finally tackle this project, having had my 308 for over six years. It meant I could methodically work my way through the process and generally enjoy it. The only real trouble I had was getting the window wire back onto the runners in the door, it genuinely felt like the wire had shrunk in the time I had it off the car, so a bit of force was needed. The difference now is incredible, and I added the window booster as well, to give the whole setup the best chance possible. Loved your outlook and enthusiasm. Now just got to repeat the process for the driver’s side. Much love from the UK
@HeidiandFranny 9 ай бұрын
Thanks Mark! So glad the video was helpful. It was a daunting task for me as well. That grease they used... You shouldn't have to chisel it out! Glad you project was a success. F
@Markturnbull1971 9 ай бұрын
@@HeidiandFranny yep, chipping all that solid gunk off certainly took it’s toll. Almost tempted to put it in an envelope and post it back to Maranello 😂
@johnspecht72 3 жыл бұрын
As always Franny, you are the best! Excellent work from Heidi behind the scenes as well!
@HeidiandFranny 3 жыл бұрын
Thanks so much John :) you're the best!
@mbrintle6619 3 жыл бұрын
Excellent job! I admire your patience Franny!
@3cl1 3 жыл бұрын
Great work on the window regulator, that Italian grease was toast.
@HeidiandFranny 3 жыл бұрын
Loke toasted epoxy ;)
@benzina5917 3 жыл бұрын
Very nicely done and well explained. This video will act as a wonderful DIY for many and as defense testimony to any shop after a customer complains about how many hours they were billed to fix slow windows. It is a VERY time consuming job with the final window adjustment being fiddly to get right.
@azizhachimi8744 3 жыл бұрын
Of course we enjoyed the video Franny! You are an amazing woman with phenomenal skills...My hats down to you Franny and best wishes of good health & happiness! Cheers from a warm & humid Montreal!
@HeidiandFranny 3 жыл бұрын
Awww, Thanks so much!
@jimmyj5605 3 жыл бұрын
Thank you for this video very entertaining and informative to watch
@HeidiandFranny 3 жыл бұрын
Glad you enjoyed it!
@alexandermercieca7878 3 жыл бұрын
Bravo
@paulp96275 3 жыл бұрын
Franny what a great job the grease that turned to glue ,nice addition to the shop a small parts washer very handy normally a bucket of degreaser thanks for the vid stay safe 👍👨🏻🏭🇬🇧
@HeidiandFranny 3 жыл бұрын
Thanks so much!
@seeingthelight3608 3 жыл бұрын
A Nick Murray t-shirt! I reckon you deserve a much higher 'solid 5/10'.
@HeidiandFranny 3 жыл бұрын
She does. Heidi
@chrissax5477 3 жыл бұрын
Really nice video! Top work! 😍
@mikebell1961 3 жыл бұрын
Well Done, The OCD side of me hangs on every detail. Love the car as well. You two should make this a full time gig on Velocity Channel :)
@HeidiandFranny 3 жыл бұрын
That would be sweet! It would be nice to have some exposure ;)
@scottiencali 3 жыл бұрын
Hey Scott.. Ratarossa... you watching? You have like 4 cars like this that need to be done! lol Nice Job Franny!! Amazing what grease and things turn into after 30 years!!!
@HeidiandFranny 3 жыл бұрын
Scott is really fun :) enjoying his 512 project :)
@scottiencali 3 жыл бұрын
@@HeidiandFranny Great guy and great teacher too!
@mikejung4281 3 жыл бұрын
Excellent presentation. Probably like (nearly?) everyone else watching, not likely ever to wrench a 308 ( but I have replaced window regulators on my 2002tii). Regardless, Franny is so articulate and vid was so descriptive that I couldn’t turn it off. Will keep watching, along with my faves: Nick Murray and Doug DeMuro. As the proud owner of a 987.1 Cayman S and .2 Boxster S, it’s too bad you had to part with your Boxster. Get another! Mike
@HeidiandFranny 3 жыл бұрын
Thanks so much Mike! Glad you liked it :) Yeah, the Boxster will always be a favorite. Best convertible ever and a great sports car!
@nathanbenich9204 2 жыл бұрын
Hey, Franny. I liked your white and yellow graph lines to help see how the orientation of the cables go. Cheers!:)
@HeidiandFranny 2 жыл бұрын
Thanks!
@duaneking2081 Жыл бұрын
Thank you both,, again
@HeidiandFranny Жыл бұрын
Thank you too!
@workinprogress1098 2 жыл бұрын
Another great video. I have to do this job soon, so good to watch. 👍
@ericdejesus6942 3 жыл бұрын
Loved it!
@horstruss1337 3 жыл бұрын
Hi Franny, I did put in my 308 after doing the same work a window accerlerator, this a relais which gives an extra electric mass to the motor. If you look on birdmans 308 parts you will see which parts I mean. After that my windows worked realy fine. Great job and great video, it is not an easy one. Always a pleasure to look on you work.
@HeidiandFranny 3 жыл бұрын
Thanks for the info! I did see that the Birdman installed a set. They looked a bit pricey but folks really like them. Would be an easy upgrade in the future :)
@horstruss1337 3 жыл бұрын
@@HeidiandFranny Yes, they are not realy cheap. You can also build it up with a relais combination, I have seen it somewhere in the net. I bought mine from superformance in the UK. You can measure the voltage at the motor to see how much you realy loose and than decide if it is worth. It is still also how easy the glass is moving in the seals. I will measure the time on my car and let you know about it.
@horstruss1337 3 жыл бұрын
@@HeidiandFranny Hi Franny, I measured the time on my windows, the engine running on idle, 1000 rpm, doors closed, roof on. I took 2,5 seconds down and 3,2 seconds up. This is with the window accelerator, everything greased 5 month ago. Hope it helps you on your 308, these cars deserve to be in a good shape.
@budskyjak3263 2 жыл бұрын
You have a talent for this kind of stuff and do a very good job of presenting your methods. This is a huge help for those of us trying some diy on these older 308's, which is good, because otherwise I'd just have a serious case of garage envy. 😁
@mikel1024 3 жыл бұрын
You can improve the "up" speed by brushing some aerosol silicone into the front channel. Greatly reduces the friction from the fuzzies.
@peterr.7429 3 жыл бұрын
I LOVE the 308, I have a 458, but my love affair with the marque was through watching Magnum PI and this car ….great video, a pleasure to watch
@HeidiandFranny 3 жыл бұрын
Wow! I bet the 458 is really special :) I'd love to get a ride in one some day.
@peterr.7429 3 жыл бұрын
@@HeidiandFranny Thank you, if you are ever in Perth Western Australia for a holiday, let me know and I will take you and your partner for a drive, by the way I miss Franny’s model aircraft building, the models were magnificent. Best regards, Peter.
@vigorousseb6993 3 жыл бұрын
Love your videos. Watching from Bangkok.
@HeidiandFranny 3 жыл бұрын
Thanks so much!
@LouTrottier 3 жыл бұрын
Awesome results. great work.
@HeidiandFranny 3 жыл бұрын
Thanks Lou! Great work on your 308 :) Lots of people have been suggesting your channel including the Straight Pipes! Looking forward to your next video :)
@LouTrottier 3 жыл бұрын
@@HeidiandFranny how awesome is that? Love the Straight Pipes. What's next on your 308?
@HeidiandFranny 3 жыл бұрын
@@LouTrottier We have a few things coming up - that steering rack and also the seals on the shift rod need to be replaced. That should be interesting ;) We also have some interior work and our grill is incorrect. Oh, I suppose I have to reinstall the suspension bits once they get back. There is also that leaking oil line to the cooler... Not a ton of stuff, but it should pretty much sort the car. But you know these cars... Always something ;)
@LouTrottier 3 жыл бұрын
@@HeidiandFranny well, all that sounds like hours of incredible fun. At least you will have lots of youtube content. Keep up the great work and don't hesitate to reach out should there be any assistance I can offer.
@michaelrobinson1945 3 жыл бұрын
How timely! I just replaced the window regulator on my '69 Beetle...along with all the rubber. I now appreciate the simplicity of the VW contraption.It was nothing compared to this. The only part that gave me headaches was the outside scraper.
@abernathymonsoon4638 3 жыл бұрын
Franny, you're brilliant! You lost me once the door panel came off (but thats just my comprehension on this stuff LOL) - but fun to watch =) Looking forward to more!
@HeidiandFranny 3 жыл бұрын
Well, thanks for watching anyway! :)
@ruaraidhmcdonald-walker9524 3 жыл бұрын
What a system! Fair play with sll the photos and notes. Lots of gotchas hiding in there. Still a wee bit slow you think? What about the motor brushes and commutator clean? Also all the window switch contacts and wiring connectors? All those little voltage drops aplong the way.....
@HeidiandFranny 3 жыл бұрын
Absolutely. I wonder what they were like from the factory. The window switches are a couple years old and they actually really helped. I was thinking of going into the motors but I just didn't want to break the factory seals. I think the wiring as you mentioned is the worst of it. Those wires aren't very thick for sure. They will be better once the car is running and we get another volt or two.
@nenorv11 2 жыл бұрын
Heidi, you also wrench? That is super.
@ghueser 3 жыл бұрын
Franny, good job. You may also want to put a little lubricant along the vertical rubber channel that runs up the front of the glass. These tend to dry our over time and make it harder for the glass to slide.
@HeidiandFranny 3 жыл бұрын
Thanks for that. I did get some dry lube on it but the window is surprisingly loose I bet those channels could stand to be replaced.
@pgtmr2713 3 жыл бұрын
Nice work! I've got windows with cables too, not a 308. Hope I never have to take them apart.
@davidmorales2900 3 жыл бұрын
As always excellent work and video presentation ! You girls are awesome 👏 😎💪. When I had my old 1985 308, I had the same problem and tried many fixes/adjustments. In the end I installed the window motor kit from Superformance UK. Problem solved for good !! Up or down they work 10x faster. Good luck on the rest of your projects. Cheers 🍻
@HeidiandFranny 3 жыл бұрын
Great to know! Thanks!
@morgang7877 3 жыл бұрын
And a Nick t-shirt too! Love it. 😀 Far beyond 5/10 though... Do you have your own merch?
@HeidiandFranny 3 жыл бұрын
We do, we have some basic ones through our website and some high quality ones though Patreon. I have all intentions of getting us some through KZfaq directly, I just have not done it yet. Let me know if you want the link to our website. Heidi
@morgang7877 3 жыл бұрын
@@HeidiandFranny yes please, thank you.
@uhuffman 3 жыл бұрын
I would have better luck soaking the whole damn door in a 55 gal. drum! lol Does that cleaner strip paint? Wonderful vid.
@ripmax9816 3 жыл бұрын
How come you didn’t clean and re-grease the pulleys in the door?
@HeidiandFranny 3 жыл бұрын
That was already done a couple years ago. I should have mentioned that.
@richardwylie07 3 жыл бұрын
Franny you’re a solid 10/10!!
@mikedx2706 3 жыл бұрын
I would have cleaned and greased each of the pulleys too. I had an Alfa Spider Veloce with a similar power window mechanism (It’s a Pininfarina thing!) When I cleaned and greased the pulleys and cable, the system worked much faster.
@HeidiandFranny 3 жыл бұрын
I did a couple years ago when I was in there last. The pulleys are pretty loose. Are they a bit wobbly on your Alpha?
@mikedx2706 3 жыл бұрын
@@HeidiandFranny No, the pulleys were stuck and not rotating freely when the cable moved.
@chrisfreemesser5707 3 жыл бұрын
What a complicated design for a window regulator! I bet the folks on the assembly line had all sort of fun running those cables. One thought that popped into my mind though...will the grease you use attack the plastic over the course of time? I wonder if the reason others have used lithium grease was to ensure that wouldn't happen...
@HeidiandFranny 3 жыл бұрын
It really must have been fun. I was thinking about that as I was reinstalling everything. I'm sure if you did it every day it would go a lot faster but there still is a lot of fussing. I think the grease will be just fine. It is a really hard plastic - like a thermal plastic. I think the original grease was simple wheel bearing grease. I've actually seen it all over (like the door latch mechanism). It really is more like slow cure epoxy! Silicone grease might have been a good choice too :)
@robertking7056 3 жыл бұрын
Franny, I finally got the go ahead from my wife to get my 993. I have waited for this day since 1995. I did mention that I am adoptable, I'm really handy around the house, and I am a trained chef soooo if you guys are willing to give up some behind the wheel time, I will speak to Elizabeth about it. Oh, I do windows ... just saying.
@HeidiandFranny 3 жыл бұрын
That's great! Let us know how it goes with the new 993!
@howardscott7521 3 жыл бұрын
Italian engineering at its finest, lol. As usual, nice work. I think our local asylum has a wing devoted to patients who have attempted this job and succumbed!
@graham6229 3 жыл бұрын
Fine engineering ? What do you work on in your garage, a Citroen ?
@johnnichols9056 3 жыл бұрын
Don't like cable style regulators they stretch over time. But great work, window regulators aren't fun for me, being 6'3" my long arms tend to get in the way. Oh yea just remembered BMW provided a product called sylglide, a product that reminds me of Vaseline, basically Vaseline with silicone in it, we all know silicone attracts moisture, not the best idea for alot of applications. Like you I used the red bearing grease, moly seems to attract grime way too easily.
@matlecomte 2 жыл бұрын
Hi Franny, great video again! Have you thought of using a tire paint marker instead of the nail polish, they come in bright colors like orange, blue or red and make it easy to mark torqued nuts and bolts!
@HeidiandFranny 2 жыл бұрын
That's a great idea!
@Thomas-vq5pb 3 жыл бұрын
never thought it would be that fiddly.... have a wonderful. Summer!
@HeidiandFranny 3 жыл бұрын
Thanks Thomas, you too!
@superbear617 3 жыл бұрын
Great job!! Your systematic approach once again produces success. (I had no idea a window mechanism could be so complex). I was curious why you did not grease the cable?? Or, would that cause slippage? Those pulleys may introduce a lot of friction into the system. But, I'm no expert! Just curious..... Keep up the good work! Can't wait for the suspension parts to come back!!
@HeidiandFranny 3 жыл бұрын
Thanks so much! I did wipe the cable with grease really to help guard against corrosion. I had greased the pulleys a couple years back when I had the panels off last time. It really didn't make much of a difference unfortunately. Probably because the cable is really only taught over like two pulleys at a time. Yes on the suspension parts! We need to make a couple calls to see where we are with that. Long lead times :(
@michaelsibilia3769 3 жыл бұрын
Great thanks,I was wondering about the motor armature bearings,did they appear free from grease?
@graham6229 3 жыл бұрын
Hi again. Great video Franny. I find it amazing that these very expensive cars (apart from Porsche) use the most basic engineering for some component parts, in this case door windows. Wires, friction grips and pulleys on a Ferrari ?
@zurdoremi 3 жыл бұрын
The "scissors" mechanism is called a PANTOGRAPH.
@FixinBugsNStuff 3 жыл бұрын
I like Franny From the Future. I need her for my next build. 😂
@jeffhammond8969 3 жыл бұрын
First initial thought - whenever I take regulators out, I use a sharpie to mark the outline of the tensioner position so it can go back in the same place.
@HeidiandFranny 3 жыл бұрын
That's a good call. Due to the way the washer squished the paint it was pretty obvious. The tension changes quite a bit depending on position.
@jeffhammond8969 3 жыл бұрын
@@HeidiandFranny agree. I was referring to my experience on my 944 and 968, which the lower track for the scissors mechanism has no such imprint. I've seen old grease before, but none that was as hard as what you had. Another thought on your parts washer is to get a flow-through brush to attach to the gooseneck.
@roscoejones4515 3 жыл бұрын
Wow, great job on an amazingly complicated system! 😨 That would have cost a bloody fortune if you'd taken it to a shop. Looking forward to the next installment.👍
@HeidiandFranny 3 жыл бұрын
That's a great point! I wonder what a shop would have charged... They probably would have just replaced everything...
@roscoejones4515 3 жыл бұрын
Hundreds and hundreds of dollars...at least!
Heidi and Franny Sailing
Рет қаралды 7 М.
Heidi and Franny Sailing
Рет қаралды 11 М.
Heidi and Franny Sailing
Рет қаралды 13 М.
Heidi and Franny Sailing
Рет қаралды 9 М.
LegitStreetCars
Рет қаралды 129 М.
Matt Spears
Рет қаралды 150 М.
Car Wizard
Рет қаралды 699 М.
Heidi and Franny Sailing
Рет қаралды 8 М.