To quote Adam Savage, pulling the masking tape off of something freshly painted, is one of the best things in the world. Also, in this light, your Giallo Modena looks more like Giallo Triplo Strato, the special triple layer paint from Ferrari.
@user-yp5qc2xv7u4 ай бұрын
성질 급한놈은 하지도 못하겠네요.. 퀄리티가 최곱니다..👍👍👍
@OMGscaleworks4 ай бұрын
Thank you so much!
@anthonywatkins27837 ай бұрын
Can’t wait to see this model flying, looks amazing already. 👌👍
@pscustommodel Жыл бұрын
OMG ที่สุดแล้วครับ
@KarlScaleModeling Жыл бұрын
Fantastic work like always. Everything is so clean and well mastered. Love the colours you chose for this F8, both interior and exterior. Well done
Wow what a great build! Well worth the wait. Thanks for sharing!
@OMGscaleworks Жыл бұрын
Glad you like it!
@onetechsungaibesar1734 Жыл бұрын
wow its nice details for each part of this model.
@OMGscaleworks Жыл бұрын
Thank you very much!
@chauffeurmarco8 ай бұрын
What an artist
@OMGscaleworks8 ай бұрын
Thanks again buddy!
@jacquesraymond6892 Жыл бұрын
On dirait une vraie. BRAVO!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@OMGscaleworks Жыл бұрын
Merci!
@piyaopasphatikul4653 Жыл бұрын
สุดยอด...
@user-gq6uc5hq2x Жыл бұрын
Ferrari beautifully painted in yellow is very cool.👍
@OMGscaleworks Жыл бұрын
One of my favorite Ferrari’s color! Glad you like it.
@user-gq6uc5hq2x Жыл бұрын
@@OMGscaleworks I love it! It's the best!
@Baztation Жыл бұрын
so niceee
@picklestheswift Жыл бұрын
Very good, the level of detail is so real!!!
@OMGscaleworks Жыл бұрын
Thanks a lot my friend!
@menelainho14 Жыл бұрын
Amazing as always!!
@OMGscaleworks Жыл бұрын
Thank you very much! I do my best in every project.
@ajm6971 Жыл бұрын
This is impressive, first time I've seen someone use Glasurit on a model car!
@OMGscaleworks Жыл бұрын
Thanks a lot mate! I try Glasurit from thinking about if it can protect my real car paint for longer than 10 years why not use it on my model cars.
@numfonsawettkul5188 Жыл бұрын
🎉🎉🎉
@aabuwasel Жыл бұрын
Beautiful👌🏻
@OMGscaleworks Жыл бұрын
Thank you ^^
@ralfschrooten7795 Жыл бұрын
Wauw! You did a great job!!
@OMGscaleworks Жыл бұрын
Thanks a lot Ralf!
@weekendhobbyist Жыл бұрын
OMG!
@OMGscaleworks Жыл бұрын
Yeah! It’s my studio’s name!!! ha ha
@joepiwowarski3748 Жыл бұрын
Beautiful job!
@OMGscaleworks Жыл бұрын
Thank you very much Joe!
@michaelhintzmikesminiature1812 Жыл бұрын
👍👍👍👍
@neilhaas Жыл бұрын
I like this model Ferrari F8 Spyder nice car nice kit nice work on model car. 🇮🇹🇮🇹🇮🇹🇮🇹❤️💘👍🤗😁😀🏎️🏎️🏎️🏎️🍝🍕🍕
@OMGscaleworks Жыл бұрын
We agree! 😍
@fluffykoala5265 Жыл бұрын
I was waiting for Alpha model from you! Amazing 😍
@OMGscaleworks Жыл бұрын
Thank you very much! Glad you like it. I still have another 3 kits in work queue, please follow^^
@fluffykoala5265 Жыл бұрын
@@OMGscaleworks I am already a subscriber for few monts, thank you for high quality videos!
@eduardoj30 Жыл бұрын
👏🏼👏🏼👏🏼
@OMGscaleworks Жыл бұрын
Thanks a lot.
@DavidTrevis01 Жыл бұрын
Fantastic work👌
@OMGscaleworks Жыл бұрын
Thanks a lot sir!
@kevinkerlin5603 Жыл бұрын
Well done
@OMGscaleworks Жыл бұрын
Thanks a lot mate! 😍
@theenzoman1 Жыл бұрын
I have this kit (and several other AlphaModel kits). You made it look spectacular! Could you explain, or make a video, about how you made the windshield contour so well? That part makes me nervous with their kits as I’ve never done that type of windshield.
@OMGscaleworks Жыл бұрын
Thanks for your suggestion! I'll do it in my next Alpha model kit. It will be Ferrari Roma.
@theenzoman1 Жыл бұрын
@@OMGscaleworks I have that one too. Planning on painting it a custom Blu Roma mix. I look forward to seeing the video!
@SealsRacingConcepts Жыл бұрын
Nice. Wish the kit had engine, drivetrain and suspension details.
@OMGscaleworks Жыл бұрын
Yeah That would be cool!
@markstott6689 Жыл бұрын
I had no idea what Glasurit was until I looked it up. It turns out that it's remarkably expensive for the varnish and hardener. So much so that I am astonished that you use it on a model. I won't deny that the end result is outstanding (plus yellow is my favourite colour) yet over £150 to varnish a model....ouch! I hope that you get a lot of models done with it 😊😊😊
@OMGscaleworks Жыл бұрын
First of all, I would like to thank you for visiting my video, For Grasurit clearcoat, I actually share it with my friend who owns a real car paint repair shop. So I don't have to buy the whole set which is expensive as you said. 😉
@markstott6689 Жыл бұрын
@OMG Scaleworks Thanks for your response. It's appreciated. It also makes more financial sense knowing that you share the cost. I assume that standard modelling acrylic varnish can't give your models the same depth of shine? Is there anything a lot cheaper that is suitable and gives a similar shine? I'm just getting back into modelling after nearly 35 years and so much has changed. Any advice would be welcomed.
@KennethYu-he8xz Жыл бұрын
Fantastic work !!! May I ask if the yellow is Tamiya LP-8 or LP-69?
@OMGscaleworks Жыл бұрын
Thanks for visiting! Actualy this yellow I mixed it myself. base from LP-8. You can not use LP-69 cause it's clear paint.
@oldman9642 Жыл бұрын
Beautiful car. Just one question…what’s holding this thing together?? Anyone?? I’ve seen paint on paint everywhere, but not a sign of cement or glue anywhere.
@OMGscaleworks Жыл бұрын
Actually I did not apply any glue in camera to prevent some mistake and I did it afterward behind the camera. Thanks for your visiting!
@geauxst9 Жыл бұрын
Exactly what I’m always thinking when I watch these
@JustACarGuy4586 Жыл бұрын
Blew it out of the park like I knew you would. Absolutely beautiful build and work. Got those tiny little JBL decals on point 👌🏼
@OMGscaleworks Жыл бұрын
Glad you like it! Thank you so much.
@endyprasetyo4479 Жыл бұрын
Amazing! Btw, why it took you way further of the built to remove the runner under the windshield (that’s like a B pillar)?
@OMGscaleworks Жыл бұрын
Thanks a lot. To prevent broken A pillar by accident, I keep them until when I have to paint black on the edge.
@endyprasetyo4479 Жыл бұрын
@@OMGscaleworks very clever! It is because the A pilar is so fragile at that state (before the windshield is installed)?
@danmurphy5889 Жыл бұрын
Looks amazing, what paint did you use to mix the color?
@OMGscaleworks Жыл бұрын
Thanks, I used Tamiya Laquer Paint (LP) for this mixed.
@modelrestorations Жыл бұрын
Just found you. Subd Beautiful builds!
@OMGscaleworks Жыл бұрын
Many thanks to you!
@ereinaldy20 Жыл бұрын
another clear paint for 1 layer will make it perfect.
@OMGscaleworks Жыл бұрын
I'll try in my next project. Thanks for your suggestion! 😉
@neilhaas Жыл бұрын
Ferrari besides Maserati & Lamborghini from Italy 🇮🇹 all Italian cars. 🇮🇹🇮🇹❤️
@OMGscaleworks Жыл бұрын
Thanks, I'm loving Italian wheels so much! 😍
@kskrs4 ай бұрын
Cool model! How you done glass masking on that one?
@OMGscaleworks4 ай бұрын
Thanks, glass masking from factory don’t have to do anything.
@JanKoneczny Жыл бұрын
U use DISPAE scribing tool? I love their products but it's expensive af. I know it's quality but.... Alfa models make awesome kit and you bring them life! Awesome work and quality!! Just great!
@OMGscaleworks Жыл бұрын
Thank you so much Jan! Yes I use a few DSPIAE products and I'm feeling lucky that this brand is not too expensive in my country.
@JanKoneczny Жыл бұрын
@@OMGscaleworks and where are you from? If it's not secret? In Czech republic we have only resellers and they're added their price so basic scribing tool it's about 35-40€
@OMGscaleworks Жыл бұрын
I’m in BKK., Thailand. I guess it’s cheaper because of different tax rate.
@akbarfiqrian5497 Жыл бұрын
Yellow flash
@lucamicalicapparelli4825 Жыл бұрын
Hi...wow!!! What glue do you use for acetate glasses? And why do you weigh 2K paint to thin it out? To be more precise? But 82 grams of clear coat and thinner? (not seen in the video). Thank you.
@OMGscaleworks Жыл бұрын
I have to mixed 2K clear with its hardener in 2:1 so I have to weight them but in video is 8 gram not 80 ha ha. About the glue for fixing the windshild I used CA Glue for that but in a little amount. Thanks for your following.
@lucamicalicapparelli4825 Жыл бұрын
@@OMGscaleworks Haha, actually 80 grams would be too much! I said bullshit! However you have a perfect painting technique! Thank you.
@lucamicalicapparelli4825 Жыл бұрын
@@OMGscaleworks But do you use different hardners based on ambient temperature? And still add 5/10% more thinner than indicated in the specifications?
@OMGscaleworks Жыл бұрын
@@lucamicalicapparelli4825 Yep you’re right!
@ernestchung4633 Жыл бұрын
May I ask, what did use on the tip to hold the parts at 28:06, thx in adv
@OMGscaleworks Жыл бұрын
It's just thin double sides adhesive tape on tooth pick tip. 😉
@lambofan86411 ай бұрын
Did you know that Enzo Ferrari is somewhat responsible for Lamborghini coming to be?
@lucid.2v2 ай бұрын
Yes and Lamborghini is responsible for Pagani coming to be
@lambofan8642 ай бұрын
@@lucid.2v tis true
@JD5i5ty6 Жыл бұрын
How long do u soak the water decals before taking them out of the water?
@OMGscaleworks Жыл бұрын
Around 20-30 sec.
@JD5i5ty6 Жыл бұрын
@@OMGscaleworks ohh okay. Thank you!
@psfanboy79 Жыл бұрын
When I try to remove excess panel line the thinner mars the paint???? What am I doing wrong?
@OMGscaleworks Жыл бұрын
Don’t use thinner you have to use Tamiya X-20.
@lucamicalicapparelli4825 Жыл бұрын
Hi, what do you mean by custom mixed for Giallo Modena? Thank you.
@OMGscaleworks Жыл бұрын
Because it's not a real Giallo Modena color from Ferrari, I mixed it myself using color matching from references on the internet.
@lucamicalicapparelli4825 Жыл бұрын
@@OMGscaleworks Ah ok, but what type and brand of paints?
@Mr.NiceGuy80 Жыл бұрын
Don't let Whistlin Diesel anywhere near this thing!
@OMGscaleworks Жыл бұрын
Absolutely! ha ha
@NhoPham-jx9xd3 ай бұрын
cho mh hỏi mẫu này có bán ko
@OMGscaleworks3 ай бұрын
This model kit available here www.alphamodelkit.com/F8-Spider-p4304300.html
@art168 Жыл бұрын
สียี่ห้ออะไรครับ สวย
@OMGscaleworks Жыл бұрын
สีโมเดลคุณภาพดี เข้าไปดูได้ที่เพจเฟสบุ๊ค : Manga Garage ได้เลยคร้าบ
@dwightatnorthernstar18204 ай бұрын
I notised most model car builders videos don't show applying a clear coat to small parts of the cars. Do they, and, if not how do they avoid getting fingerprints and paint smudging on small parts when assembling>>??????
@OMGscaleworks3 ай бұрын
For me, to use clear coating on any part It doesn't depend on the size of the piece. But it depends on the accuracy of the actual car.
@fitzy2006uk9 ай бұрын
How long does it take you to
@OMGscaleworks9 ай бұрын
Do you mean “How long of this project build?” It’s about 2 weeks.
@siyoucefdz68837 ай бұрын
How about you get another one and make it pink
@OMGscaleworks7 ай бұрын
If I do that I might get sued. Or get blacklisted from Ferrari haha
@chauffeurmarco8 ай бұрын
I have been seen this many times. why Grey primer and a white primer
@OMGscaleworks8 ай бұрын
Grey for imperfection checking and white for brighten yellow base coat paint above.