Para aquellos "sabelotodo" que dicen "mejor voy a la ferretería y me ahorro tiempo" . Este video y muchos otros que he visto de este canal se me hacen excelentes, soy mujer y en el lugar donde vivo las ferreterías están lejos de mi casa. Me ha pasado que cuando necesito algo (algun imprevisto no deseable) siempre me pasa en domingo, y despues de las 6 pm y es cuando las ferreterías cercanas a mi casa estan cerradas. Estos trucos son excelentes cuando en ese momento quieres salir del apuro. En mi casa habia baja presión de agua y no podía lavar por que mi tinaco estaba vacío debido a la presión por lo que uni dos mangueras como en el video (con material que tenía), no igual pero me dio la idea y resultó, pude llenar mi lavadora, directamente con las mangueras de la toma de alimentación principal de agua. De lo contrario tendría que haberla llenado con cubetas (unas 5 o 6 cubetas mas otras 5 para enjuagar).

If you have these things just laying around, you probably already have an adapter.

A plastic double female hose thread connector bought from the hardware store is going to be cheaper, more reliable and take less time.

Es mas facil comprar el niple en la ferretera que tener todos los materiales a la mano para realizar nuestro "niple casero"

Hi, interesting method of making an adapter, however in the U. S. Our hoses come with one male and one female end so such a coupler is not necessary.

First off, if you're actually buying water hoses without a female coupler on one end, and a male coupler on the other end, then you have bigger issues than just needing a coupler! Second, this hack ONLY works if you have that type/size of PVC laying around, and the exact size nut you need to make the threads. If you don't have either of those, you will need to buy those items, thus negating the need to come up with the hack!

Didn’t realize adapters were that expensive

Your creativity is to be commended 👍🏽

good way! highly practical , applicable to temporary cases !😊

If I thought about that, I would consider myself a genius! Good job!

Gracias por los buenos consejos de cómo unir una,manguera

A lot of work and need to have the tools and items - I rather buy an adapter if I need one. BUT - well done!

This way can be applied to temporary cases ! you are so creative

Exelete video muchas gracias ,

Since each female coupling was added to the hoses aftermarket, just buy, and have on hand, a double male when you bought the females.

I mean, it's a cool idea and all, but I think I can swing the .97 for the connector should I ever find myself in such a situation.

Of course, you just happen to have a metal coupler of the right size in your toolbox, instead of just the proper male part.

The mind is the best tool one can possess. Your mind is well at work. Blessings.

La NASA deberia contratarte carnal

EXELENTE TE FELICITO , BENDICIONES

Por la excelencia que bien

The key is to have these pieces on hand, and a gas stove or a torch handy to heat up the metal nut enough to be able to melt a thread in to the PVC tubing. Nice and creative idea for sure!

Great idea... most DIY guys have stuff like this lying around in junk drawers and tool boxes...I know I do👍🏽

You still bought the pipe,brass fittings,natural gas,tools to use.think it would have easier to just get the adaptor

Perfecto 👌

Buena idea

very nice! Creativity has a very high practical application!

"WOW'😲'MAN", GREAT IDEA 💡, When I was a kid, I would fix My G.I.Joe's or He-man Plastic Toy's in a Similar💥Fashion. `But', Thank You for Your Great Idea. The Brain 🧠 Need's to be used at Time's, With Simple Fixe's as we seen here. Instead of Running back and forth couple of times to the hardware store. Simple, But EFFECTIVE SOLUTIONS is what we all need. Once again THANK YOU & MAY YOU ALL' HAVE A WONDERFUL NEW👍YEAR.

I love plumbing comedy 😂😂

Perfecto 👌 muy buen video 👍

Greetings from the LooseNatural farm in Andalusia Spain

Ай! ВОЛШЕБНИК !

Good ideas

Genial amigo muchas gracias por compartir tu idea

This method requires a very specific set of circumstances. 1: you need to connect 2 female adapters. You have no other option. 2: You need to be in possesion of a nut with the correct thread. 3: You need to be in possesion of a plastic pipe with the correct diameter, made from a type of plastic that melt instead of burning to a crisp. 4: you need to have immediate access to a heat source that will heat the nut to a specific temperature. If at all possible, I would just buy a quick connect set instead. I live in Denmark, so a set from Gardena (one that would only let water through when connected) would be the obvious choice...

I’m going back to bed 🛏️. I cannot believe what I have just seen.😮😮😮😮😮😮😮😮😮😮😮

Magnific

Great Idea. I also have subscribed to your Channel...

Not being funny but ‘WHAT A LOAD OF RIDICULOUS EXTRA WORK

Зачем изобретать Велосипед????🤭

Suggestion brillante et utile. Le Québec salue le partage de votre savoir....... maintenant vous avez une réputation mondiale. Bravo

Excelente amigo. Para salir del paso.

Genial

When was this made? Back in the 30s? Gas stove has pilot lights in this generation

Yo use un Acple Rapido para PVC, y me anduvo joya

Gracias por compartir tus videos, para mi lo que yo haría es comprar un conector macho sin necesidad de hacer tanto rollo

Good job good luck

Good god if you have all those materials laying around the house chances are you have an adapter.

“👍” Thank you 【2022 Los Angeles🏆】

Simplemente ponerle una union con doble rosaca y teflon.

At least you have me an idea of how to directly connect PVC piping to a garden hose without having to buy a bunch of adapters and/or how to make a new PVC connector for a stripped one.

If an American plumber came to that country they would think an alien from an advanced civilization had landed

i would sooner go out and buy a host of different types of fittings, as some hackes are not as realiable as manufactured products. P.S. your drill bits should be standing upright, rather than in a pile for moisture to rust them out

An adapter is really not that expensive and very easy to install. Not taking the bait on this one. :-)

Not sure why you would ever need to connect 2 female couplings together, creative nonetheless.

En caso de no poder hacerlo, dónde y cuanto costaria ese adaptador?

You are burning the aunties kitchen top

It would have been easier to just remove one of those hose ends and put those threads on the plain hose end exposed instead of making a double-ended piece.

could save a trip to town

Only for a washing machine would you buy a male/male-ended hose.

Personally I'd simply use the other end of the hose. The one that already has a male end on it.

They cost less then a buck and you will have time to enjoy other things in life.

It is cheaper, faster and better to buy propper fitting

Lo conectores para manguera hay hembras y machos pero la idea es buena

Reparación de una manguera rota? Por fis

I’ve never had a need to hook up hose backwards.

You can buy threaded hose adaptors just for that.

Does this really work

Lo hace más complicado. Los dos extremos de la manguera ya de por sí tienen adaptador

Its called the amazing technique of turning one of the hoses around and using the freaking end with the female thread. Duh.

If the adapter was designed well, why did something to change the way of function that was not necessary. Did the little connection device hard to find or it was far too expensive to buy it once for facilitate own consumption daily?

Gracias por compartir, muy buena idea; y como se puede hacer cuando una de las roscas es inversa?

Muito bom, sensacional.

La misma pieza mas larga wow pasates mas tiempo calentando que poner la primera que tenias

Well what if you don’t have the metal fitting or the scrap plastic pipe in the correct size. So it’s likely cheaper to buy the adapter if you need it.

Más caro que comprarlo listo.

Ottimo

wow! 2 different thread forms go together!

Still you need the nut and fusion pipe.

Few people would care.

Nice

☑️🌻

How much to instantly buy a steel one ?

You can repipe a house in that country with garden hoses pvc and a heat gun

Un terminal macho y uno hembra en cada extremo de la manguera.

O.. M.. G...! A Gas flame stove..👀 re..... Re...... REEEEEEEEEE..... REEEEEEEEEEEE...EEEEE..!!! 😂😂😂😂😂😂😂😂😂

All that messing on for the sake of a 50p connector 😂😂

Easier to buy a 97 cent adapter

Genius, I made a brake line replacement using the same concept.

u must have this pipe parts, otherwise buy a cheap connector is more easy and safe.

Obviously, those are replacement hose ends. It would be much easier to just replace one with a male end.

easiest way..1/2 pex..3/4 worm clamps 50 one ebay 10$...comprendo..

what size plastic pipe was used between the two fittings?

I use a female/female hose for my sewerage connection on my camper and use a male/male barrel to keep it closed while stored. Interesting 🏕

Te tardas más que ir a comprarlo

El agua es de la llave o purificada?

Soooooo, instead of just buying the coupler, likely with included washers as well, for a few bux, you need to have: -- a metal fitting of the exact size and thread, -- a length of plastic pipe the exact right diameter, -- a convenient gas stove to heat the fitting, -- a utility knife to trim the finished pipe, etc., and -- *still* need washers to prevent leaks. Like, great, it can be done if you have all that stuff handy, but why bother? I can just imagine someone walking into a supply store to buy the metal fitting, pipe, etc., and making a kludgey homebrew adapter, instead of just buying the exact perfectly-fitting adapter directly.

Ummm, yeah 😳

ADAPTER CHEAPER AND QUICKER

Good