Рет қаралды 6,156
This is a quick and easy install tutorial for anyone looking to upgrade the front brakes on their Fiesta ST180 Mk7.5 to accommodate a set of Megane Brembo Calipers.
Luckily enough the setup fits perfectly behind my Rota Grid 7.5J alloys. But anyone running a standard set of alloys will need to use a spacer on each wheel to accommodate the larger calipers.
The kit can be put together from parts easily sourced online, for roughly £450 - £600 depending on how your source your parts and the condition they are in.
Once you are done don't forget to bleed your brakes and torque the bolts accordingly.
ROUGH PRICE FOR PARTS NEEDED
Brembo Megane 225 calipers - £200
Brembo conversion brackets - £125 - ( Sourced from / nick.palmer.5220 )
Caliper bolts - £50 ( You can save a bit here if you get some supplied with your calipers )
Ford Focus ST170 Front Discs 300mm - £60
Front pads - £40
Brake pad pins - £15
Brake fluid - £10
SPANNER/SOCKET SIZES
13mm - Front caliper.
15mm - Rear caliper carrier.
12mm - Brake line fitting ( I will double check this tomorrow )
10mm - brake line hose bracket.
12mm - Brembo caliper bolts.
TORQUE SPECS - Sourced from Google
Use thread lock on these bolts
Rear caliper carrier - 70Nm
Caliper bolts - 160Nm
If you have the torque specs for the other bolts please feel free to drop me a message so I add them on.
Don't forget to use a brake line hose clamp as I did.