Figma Power Review (SHFiguarts V.S Figma Round 2)

Рет қаралды 3,591

Crypt Toys

6 ай бұрын

Today the Crypt lets Figma and SHF duke it out in a all out brawl for who makes the best Power!

Пікірлер: 28

@wgf2995 6 ай бұрын

This guy kind of reminds me of MDT He does WWE toy reviews.

@CryptToys 6 ай бұрын

He's my brother!

@shannonbushCC 5 ай бұрын

Love it!♥️

@CryptToys 5 ай бұрын

Thank you! ❤️

@demetricsmith471 6 ай бұрын

Awesome video❣️

@CryptToys 6 ай бұрын

Thanks, chief!

@gabrielmorenomartinez3137 4 ай бұрын

Contact the good smile company they’ll more than likely send you a replacement for the part that broke or contact the retailer you bought it from and try and send it to figure back or get it replaced entirely

@CryptToys 4 ай бұрын

Good idea!

@Sativasoldier666v2 5 ай бұрын

Did your figure come with a figma bag to put the accessories in? mine didn't, lol.. the S.H. Figuarts is so much better by a landslide, just needs a few coats of paint. Also you could probably warm the face up with warm water, a hair dryer, or if you want to risk it - a heat gun, get a mini flat head screwdriver, then pry the joint out of the face, then super glue it back unto the head.

@CryptToys 5 ай бұрын

No it did not have the usual sandwich bag! I forgot to mention it, the chainsaw man figma did tho. And yes! Thank you! I did get that broke peg out afterwards. It's still super fragile but it's the sculpt I like so I kept it in. So thankfully her face doesn't wiggle under the bangs anymore!

@Sativasoldier666v2 5 ай бұрын

@@CryptToys Agh! so they left the bag out on purpose, those cheap SOBs lmao, glad to hear you managed to fix it though, i applied some Tamiya grease on mine so the faceplate doesn't get stuck and accidentally break the peg.

@CryptToys 5 ай бұрын

Lol right? Thank you! Good idea, im definitely giving every figure from here out a quick dip in some hot water or a hair dryer before i go yanking anything off. @Sativasoldier666v2

@Sativasoldier666v2 5 ай бұрын

@@CryptToys Haha, yeah you live and learn, speaking of which, if you are going to use the two methods i mentioned above then there's something you should know, hair dryers should only be used on softer, flexible or pliable plastics like PVC, meanwhile water can be used on most types of plastics, but be very careful with rigid or hard plastics and heat, once something warps, it's game-over. There's a way to use the water method without getting your figure soaked, and this is the one i'd recommend using if a hair dryer isn't available, it works as follows: 1. Get your figure and a zip lock bag. 2. Put the figure inside the bag and get all of the air out before zipping it up. 3. Fill a pot or bowl with warm water. 4. Put the bag with the figure inside the water. 5. Wait 20-30 seconds, sometimes more, check every 10-20 seconds. 6. Success! (hopefully.) A hair dryer is way more straight forward, but you don't want to spend too much time heating parts, since it's a lot warmer than water, so check every 5-10 seconds when heating a part before you pop something off. Anyways, happy collecting, and hopefully my tips have been somewhat helpful, lol.

@CryptToys 5 ай бұрын

@Sativasoldier666v2 Thank you, chief! I sure do appreciate it. Never thought of the zip lock bag method! I'm use to burning my hands when touching my figure and some of that hot water would drip out! Happy collecting my friend!