You should make a series were you fix clones like so he can see

Summary: Quick shine or rejuvenate are good options. Rejuvenate is the best, Quick shine is more budget friendly

Thank you DStar! You have really helped me with a lot, the nock off SHFiguarts, loose joints, tight joints, so much thank you!

Thanks man. Going to be giving you a shoutout and linking to this video in one of my upcoming videos.

Omg TNX for this vid !!! Now have to do it to my sailormoon figures !!!!!!

Just so you know, Pledge Floor Care now actually IS Pledge Revive It. That's why Floor Care is no longer available.. because they named it Pledge Revive It. Therefore both your first 2 bottles were actually the same product!

This is cool but you can also use those tiny hair ties as well. It works really well.

Thank you I definitely will go pick one these up!!

What is the science behind this how does the floor care tighten the joints

I got a bootleg neca GOW3 Kratos that besides the loose joints (and gold nipples) it's pretty good. And this can make it really good

As far as length of time after 3 years passed, how are those touched up figures looking? Are they still nice and tight?

I juet used rejuvinate for one of my cap figures and it is not as loose as it was it worked amazing when i used it

Hey would you be able to tell me if these figures have held up in time with these techniques? I know this video is super old though

Per your expert conclusion, I bought some Rejuvenate today. Excellent experiment, friend. Also.. where do get those dropper applicators? Salute from Michigan -- Paul

Which would you recommend for my S.H monsterarts Godzilla Final wars, it completely falls apart if I even move any of the joints (except for the legs, they're ok)

This was extremely helpful. My anime heros naruto uzumaki isnt loose now :)

My SHF Sailor Mars has a slightly loose lower left leg. Could be worse, but my conscious has been freaking out on fixing it.

This video was very helpful thank you.

Where did you get that needle syringe with protective casing?

I need this for my sh figuarts Django fett

Dang i may have to try this ive been using little pieces of toilet paper

Do you have a link to the syringes you used for this?

I want to try both Rejuvenate and Quick Shine

Now Dr. Dstars Fixer Elixir destroys all of these.

What do I use? If I don’t have the stuff you used to apply the floor polish with?

What seringes did u use? Any links? I like that set up of the case to secure the cover and the plunger

I actually found floor care for really cheap on eBay. I bought it for my sinister six toy biz spider man and I hope it works.

Does this work for Accessories too? I have a bootleg Mirage Raphael and his sais keep falling off, if I used this on the sais would he be able to hold them without struggle?

Hey. My figma Mikasas leg keeps falling off. Does this still work for that. Because I’m going to be really sad if I paid like 110 dollars for a practically unusable figure

I've always used nail polish.

Would this work for a peg hole? The peg hole for my Rayquaza select figure is loose.

I wish I could post a picture because I would post a picture of the bottle of the original future premium floor finish that I'm looking at with a fancy nuclear atom imagery it has on the label. Jesus I wish I knew they were going to discontinue this stuff cuz I would have bought dozens of bottles I don't use it on models but on everything in my house cupboards walls light fixtures Doors door jambs wall trim everywhere makes it look fantastic !! I'm seriously debating getting the chemical composition and making some. Bottles like I'm looking at right now the original future premium floor finish I've seen like 3/4 full bottles go for $95 on eBay

would u say rejuvenate is too tight? or Perfect?

And now I’m having a hard time finding the Pledge revive it floor gloss

Got the demoniacal fit goku black yesterday and it’s loose. Definitely getting this stuff to fix the joints

Can we use this pledge polish to joints that has metal in it?

Where do u get the needle thing to put the thing on the figures

Where did you get the syringes from?

I want to put this on my Spiderman 2 action figure and is in near perfect condition except his loose ab crunch. I want to put either quick shine or rejuvenate in the joints, but if I put would it mess up the paint or leave a white mark on the paint? If it does, is there any way to fix that?

Any way to get rid of the stinky smell from the quick shine

any know if it damaged plastic???? HALP

I put the quick shine on my four Horsemen monkey, king figure legs and it didn’t work. The legs are still loose.

Rejuvenate wins 👏🏽

Hi i have a SHF SF Akuma figure, the arm joint keeps falling off the socket when i articulate it, will pledge work to fix it?

Would Murphy’s oil soap work as well?

Me watching this cause my dragon stars vegito broke there is a little stick that if you put out the leg you can see it well it broke and now i have the leg but the little stick is broken and the stick holds the leg and they putted glue on it did not work if you could tell me if it can be fixed an other way i would be happy

My captain america 3.75 figure one of the legs is very easy to come off how do I fix that

Is this fix permanent or do i have to re-apply it once in a while?

Where did you get those syringes for this joint fix

I was lucky enough to raid my moms cupboards and found a 1/4 bottle of future.

Thanks you just saved my TMNT Casey Jones and me£10.99

Will it work on a dragon evolve vegeta?

Pledge Revive It also discontinued early 2022

Hi. Excuse me, I had a question. What is this liquid and what is it used for? This liquid does not exist with this brand in my country. If you can help me and tell me what this liquid is, I would be very grateful.

Hard wood is 93 at walmart

What do you use to remove dried excess pledge from the figure ?

I got a super sayian goku shf and the right leg and arm are loose

Mattel Jurassic world spinosaurusus loose legs. Anyone fix it?

Bro grabbed heroin needles to do surgery on his toys 😭

will it work at transformers figure?

Dstar01 Could you do a review of the original Mafex Spiderman Homecoming figure please ?

Would be 9 buck if you use that 1.00 dollar off coupon still stuck on the bottle

67 bucks or 6 to 7 bucks?????

How about shf figurearts spiderman homecoming because its joints are some meatl circle things in them would they work

Please restock your compound

the new pledge florrcare didnt even fix my tm terasaurs Flippy arms at all it sucks

I had 2 2.0 body body bootlegs ssg goku and awakening

I soaked my snake eyes figure which is new in the pledge one hope he gets better because I hate him

My raimi figure is very loose He can't stand by himself

Use transparent nail polish .

maybe make the music bit more quiet next time.. ty fie the vid tho

You made this literally when I needed it most I have a few loose arms and legs on some figs I was just messing w/yesterday!....thnx for the save.

Perfect...now I gotta collect floor shining products...great video man!

The effectiveness of the Rejuvenate on that Captain America figure probably had more to do with surface area as much as anything. I've been using Pledge Floor Care Finish with Future Shine for many years now and I've found the size of the joint, or more specifically the total area of contact, has the most impact on how effective the Pledge will be. Simply put, more contact area means greater friction. The Holloway House stuff might have preformed identically on Cap's waist.

Yes, I need this for my dragon stars and a toybiz Spider-Man, they are getting extremely loose so thank you!!

11:52-12:00 What every adult female in a new relationship wants to be told. 😂

Really nice man! Always good to know how to fix loose joints. What I use(when the joints arent extremely loose) is teflon tape, it does a pretty decent job

On the back of the Rejuvenate bottle it says "BEFORE USE: Floors treated with acrylic based coating must be thoroughly stripped." I'm gonna guess that acrylic paint counts as an acrylic based coating, so I'm a little hesitant to use it on an action figure. (although that might be why it works so well)

Now I know how to tighten my Super Poseable Spider-Man 2 6 inch action figure in my collection! Thanks Dstar01! 👍😊

Where was this video when I needed it last week

That's a really dangerous way to re-cap needles. Try laying the cap on the table, insert the needle and then re-cap.

Great video, Dex. Useful and unique content. Keep up the good work. I recently bought Thanos and Iron Man MK50 Infinity War ShFiguarts KO's from AliExpress. Guess what? They look extremely decent. Thanos looks perfect, while the only prob w/ Iron Man is the flimsy articulations. Thanks for the solution.

Thanks for the tip! This video is very helpful.

I really like the way you say products

Very helpful! I got a different type of Pledge a while ago for my Deku bootleg but sadly it didn't work. Definitely gonna pick up some Rejuvenate.

I don't do drugs so do you have a link for the syringes?

I got the quick shine cuz there was no rejuvenate and i really hope quick shine works

Just what I needed cause my vegetas legs are loose thanks man 😊

Thank you for this. Subscribed.

Nice and informative, I've always wondered what would be the alternative if Pledge ever becomes unavailable. Recently I also looked for more Pledge but the ones that showed up available at my Walmart are different from the 2014/2015 Pledge version that I currently use. I still have my Pledge Floorcare Multisurface Finish from 2014/2015. I still have more than half of it due to how little of it I use each year. Surprisingly, it still works even now in 2019! Anyway, based on what I saw in the video, I think Rejuvenate tightens more than Pledge. Whenever I used Pledge, it never got to the point where I'd have to use decent force just to make the limb move. I'm just a little bit worried about what seems to be "Super Tightness" that Rejuvenate causes. Wouldn't it be bad for thin joints? Although Rejuvenate would reinforce the joint area, I fear that the force necessary to make the joint move (coming from us) would potentially cause accidental breakage in the area. Maybe we need another experiment where Rejuvenate is applied on a bootleg toy's thin joint. An example of a thin joint would be the type where it looks like it's just "half" of a whole joint, usually used on wrists in Figuarts toys. If a bootleg toy's thin joint can survive decent force after being applied with Rejuvenate, then it would mean it can safely be used on even original thin joints. I think for now, when it comes to Rejuvenate VS Quick Shine, I'll pick Quick Shine because it doesn't cause "Super Tightness" so to me that is safer, at least until we find out if Rejuvenate won't cause breakage on the thinner or weaker joint types :)

I’ve been holding off on getting revive it. Now I can put this on my Toybiz Spider-Man (2002) movie figure. Thank you!!

Thank you!! I’ve been looking for a floor care product to tighten my marvel legends. I had read that the new Pledge isn’t as good as the old one. Not to mention couldn’t find any pledge floor care products in my area, but I did find Halloway House! Except it isn’t the Hardwood version, it is The green label “multi surface floor finish”, I’m wondering if this would work?

Has anyone ever tried mop and glow? Can you do a video on that?

Great vid. I’ve also heard that r/c car hydraulic shock fluid works as well or better than floor care products. Maybe Kyosho makes some? I‘d be curious to see that tested at some point.

How do they taste though ?

Can I use spray ?

Awesome vid, keep up the great work

I need some of that Floor Care, I got a Malekith and out of the box his ab crunch was so loose, same for my Green Goblin had the same problem as your captain america and ruined the posing factor

I might be nitpicking and I'm grateful for the video wouldn't it have been better to apply each of them to the legs of the two Spidermen? Even so great video and time for me to buy some wood finishing products

You know, I might buy one of these for my loosed Exia and 00 Raiser. Their limbs are so loose that I'm afraid they might fall from their pose.