Filter Your Resin Infused IPA In 3 Steps

No video

Filter Your Resin Infused IPA In 3 Steps

Рет қаралды 34,242

Күн бұрын

3 step process to effectively filter your resin-infused isopropyl alcohol (or IPA for short) and reuse it!
1. Pour the dirty IPA through a filter into a glass jar.
2. Let the jar sit in the sunlight and allow sediment to harden and drop down to the bottom.
3. Siphon off the clean IPA and dispose of the sediment at the bottom.
Let us know in the comments if you have had success with this process or if you have other great ideas for filtering IPA!
We find that 99% IPA works best for cleaning resin prints and we use a lot of it, so we buy it in gallon jars: www.amazon.com...
Glass jars: www.amazon.com...
Siphon: www.amazon.com...
Filters 50 -190 micron: www.amazon.com...
Funnels: www.amazon.com...
Where to find us online:
www.WhamBamSys...
/ whambamsystems
/ whambamsystems
/ whambamsystems
/ 35445851
/ whambamsystems
/ whambamsystems

Пікірлер: 42

@rothery2 2 жыл бұрын

Next time go to your local brewer supply store and get something called an Auto-Siphon. It's made for getting liquid out of jars and leaving behind the stuff at the bottom

@Sharpevil 2 жыл бұрын

Might want to move it back a bit for that first pour. A lot of that resin-laden IPA is splashing out past the slap mat onto the edge of the counter and floor.

@WhamBamSystems 2 жыл бұрын

Noticed after filming. Lol

@robertom.5734 2 жыл бұрын

Great advice and very useful as always. Please keep uploading these videos so helpful and your experience helps those of us who are just starting out. I am your customer from Spain. Best regards friends.

@WhamBamSystems 2 жыл бұрын

Thank you for the kind words, we will keep making them and have quite a few more planned. Enjoy your 3-D printing experience, it’s very satisfying

@njcivicwagon1 2 жыл бұрын

Nice set up. Thanks for sharing

@randallsean9028 Жыл бұрын

This is terrific, been the best guide I've found for cleaning IPA

@WhamBamSystems Жыл бұрын

Thank you for the kind words!

@myspawngabriel 3 ай бұрын

Can you do this video again with used/dirty IPA ? This way we can see the final product

@koroshghanbarzadeh1360 2 жыл бұрын

A future video on how to properly change FEP on resin prinetrs will be great.

@WhamBamSystems 2 жыл бұрын

Thanks, could do that!

@paulmason6847 8 ай бұрын

You can get sediment syphons for wine making that leave about 1/2 inch in the bottom

@koroshghanbarzadeh1360 2 жыл бұрын

Best tips and methods like always. Thank you.

@WhamBamSystems 2 жыл бұрын

You are welcome!

@Enjoymentboy 4 ай бұрын

The problem that I do not see being addressed in ANY of these videos is that following only removes solid material. It does nothing to remove the dissolved material. Distillation is the only truly effective method.

@kapitanbeuteltier5889 4 ай бұрын

While true, but in my experience even somewhat dirty IPA still works for cleaning prints after using some simple filtering methods - you just dont want visible gunks sticking to your models.

@talaananthes Жыл бұрын

Wait, that perfectly clear lovely IPA is what you call dirty? Jesus that's hardly been touched. That's like...two prints worth of washing.

@TheIcemanModdeler 2 жыл бұрын

Thanks for sharing.

@OminousPinapple 2 жыл бұрын

I put a cheap lawnmower fuel filter in my siphon line to get out out small particulates. A ceramic / carbon filter would be better though.

@kellydavis3108 2 жыл бұрын

I watched another channel where leaving dirty alcohol in the sun produced a jar of pudding. This looked much better

@WhamBamSystems 2 жыл бұрын

it can happen if super saturated, clean earlier, and leave your jar untouched for as long as you can, even a few months. It should separate

@JK-zx3go 19 күн бұрын

Is there a reason you do not just filter the sunlight treated IPA?

@phamtomcr 2 жыл бұрын

thanks for sharing

@ainsleyisrael6603 2 жыл бұрын

If you want to get it properly clean put the dirty alcohol through a still

@WhamBamSystems 2 жыл бұрын

Could be very dangerous as alcohol vapors are prone to spontaneous combustion

@3DJapan 2 жыл бұрын

I find my ipa turns brown when I leave it sitting in the sun.

@WhamBamSystems 2 жыл бұрын

Haven’t seen that! Is it just super saturated?

@vividpsychosis8222 2 жыл бұрын

I just got your flex plate for a Saturn 2. Do I need anything else to install it and have it work correctly and still print? People are saying I need a washer or some other things to install for it to allow my machine to still level correctly

@WhamBamSystems 2 жыл бұрын

You can find space or information right on our support page on www.whambamsystems.com/support, The exact spacer for Saturn 2 is www.thingiverse.com/thing:5407687, and watch this for more info kzfaq.info/get/bejne/gNh5mNhyzL6bpn0.html

@GlytchOut 8 ай бұрын

damn, you managed to get some in the jar... if only the mat was the jar...

@WhamBamSystems 8 ай бұрын

Lol

@TheAtomicSoul 2 жыл бұрын

I try this and all it does is turn the whole bottle into semi-solid sludge. Then again, your "dirty" water is the third stage of my cleaning process. The first one, and 1/2 second, are too dark to see through and turn into the sludge if exposed.

@WhamBamSystems 2 жыл бұрын

Let is sit for a number of weeks, it should drop down. Otherwise in future clean earlier before alcohol is too saturated

@davesou1 Жыл бұрын

everyone puts it in the sun. Why not get a uv lamp and let it do its thing. Wouldn;t that be a whole lot quicker?

@PowerAirSimulations 2 жыл бұрын

Is it possible to use a UV light to speed up the process?

@WhamBamSystems 2 жыл бұрын

I’m sure it would work, but the sun seems to be the strongest source, you also need patience and time for the sediment to drop down to the bottom

@elihaun9886 2 жыл бұрын

I do this with my pickle jar setup. when it gets cloudy I just set the whole thing in the UV box I made overnight. the next morning I pour it threw my paper filter into a sour cream/cottage cheese tub (always have one or two of these in the kitchen), wipe the pickle jar clean, and then filter it again as I pour it back into the pickle jar, and finally throw away the cottage cheese container. No need for a siphon.

@auldcrow1461 2 жыл бұрын

Starting with clear ipa. Lmao mines is like milk

@WhamBamSystems 2 жыл бұрын

you might have to do this earlier, before it gets to be milk!

@viziunarium607 2 жыл бұрын

I had dirty alcohol with tesin already in the bottom and i put it in the sunlight . Some moments later it turned into kind of " milk " . Is there a way to clean that " milky " ipa ?

@WhamBamSystems 2 жыл бұрын

Let it sit for quite a while it should separate again, I think the milky effect happens due to being super saturated. It might be best to filter and clean your alcohol earlier

@garywood683 Жыл бұрын

no sorry, not buying it, I abandoned the sunlight part some time ago after realising that the resin does cure but some fine resin becomes part of the liquid, all other parts shown here i do, but i store in the dark, I then get clean, clear non sticky alcohol, but after 2 cleans I fi d the ipa is then dead or to sticky to reuse.