No video
Finally low! Adjustable Rear Ride Heigth - Volvo 960
Рет қаралды 4,015
Күн бұрын@satsmotors / satsmotors
SUBSCRIBE NOW! bit.ly/2VwQ178
In this video I fabricated new rear lowering arms. Now I can go even lower with the ride height and it's adjustable. After the install ride height was perfect!
BMW E65 760i playlist - bit.ly/2Vveh9K
Opel Corsa OPC playlist - bit.ly/3nPSEP4
Volvo 960 playlist - bit.ly/2SACOIQ
Contact us - SATSmotors@gmail.com
@theAngelofhevn Жыл бұрын
Soo nicely built! Soo good to see custom parts for Volvo 960s!
@SATSMotors Жыл бұрын
Thanks!
@antn8387 Жыл бұрын
interesting IRS with leaf spring design.
@SATSMotors Жыл бұрын
It is!
@bjarneku Жыл бұрын
Stoked to see version 2! I'm the guy who bought your old ones btw
@SATSMotors Жыл бұрын
Have you installed the old ones?
@lanei2103 2 ай бұрын
Polecam!!! Kupiłem , zainstalowałem. Wykonanie super. Auto prowadzi się o wiele pewniej. No i wyglada zdecydowanie lepiej. Warto!
@SATSMotors Ай бұрын
Thank you for the kind words! Good to see that you liked it!
@tylerdoyon7525 Жыл бұрын
Would you consider sharing your measurements so that people may recreate this?
@SATSMotors Жыл бұрын
Will try to get it on sale with a reasonable price.
@eddd6827 Жыл бұрын
Interested in arms too! Thanks
@slimsqde7397 Жыл бұрын
@@SATSMotors i would definitely be interested in the cad files for this!
@SATSMotors Жыл бұрын
@@slimsqde7397 lowering arm are almost ready and will be on sale soon!
@AJ-vu3oc Жыл бұрын
Excellent job! But why such a messy front fender widening? Wasn't that impossible to avoid with the used tool??
@SATSMotors Жыл бұрын
If the fenders weren't that rusted then I could have pull them out with the tool. But the inner fender needed hammering because it was too strong to roll with it.
@AJ-vu3oc Жыл бұрын
Isn’t the inner fender made of some kind of syntetic stuff that can be adjusted by heating it rather than just cutting it off at the edges? I ask this because I have the same problem with the rear fenders of my ’93 960 (coilovers around) after installing the Brembo R calipers and 18 inch rims using 225-40 tires.
@TurboWorld 9 ай бұрын
Hmm 940se ideas.. Very Sweede!
@SATSMotors 9 ай бұрын
Thanks!
@Enus10 Жыл бұрын
Hi. I’m also interested to bye the custom control arms😃so please let me know when you are ready.
@SATSMotors Жыл бұрын
Will do!
@lanei2103 Жыл бұрын
Hi. I am interested in rear lowering for volvo 960. What would be the cost of the set + with shipping to Poland? Regards Leszek
@SATSMotors Жыл бұрын
Hi, I still do not have a way to produce and sell them. Sorry! Will let you know when they are available.
@lanei2103 Жыл бұрын
@@SATSMotors I AM WAITING FOR INFORMATION. Regards
@meatballs9127 9 ай бұрын
Nice
@SATSMotors 9 ай бұрын
Thanks!
@m_a_x_i_m_u_s_s_c_a_t6526 10 ай бұрын
Hello. I would like to buy these lowering levers from you. what price?
@SATSMotors 10 ай бұрын
Please contact at SATSmotors@gmail.com
@uni0230 Жыл бұрын
bro you could just get shorter shocks, All that work
@SATSMotors Жыл бұрын
Yes you can run coilovers instead of shocks and remove the leaf spring. But I wanted to keep the OE leaf spring and have the OE ride quality with lower ride height.
@624static Жыл бұрын
@@SATSMotorsI can't wait for these new arms, but in the meantime would swapping out the shock for a coil over work ok? I like the stock leaf but if it needs replacing it's more than some kits
@SATSMotors Жыл бұрын
@@624static it will work but the lower control arm where the shock mounts are not ment to take the load of the spring. It can be used but it might brake the lower arm.
@624static Жыл бұрын
@@SATSMotors how soon would your solution be ready?
@SATSMotors Жыл бұрын
@@624static Hopefuly this month
@jakob4044 Жыл бұрын
Perfect work! I am very fond of it. Is it possible to buy the homemade struts from you? Greetings
@SATSMotors Жыл бұрын
They will be on sale soon. Will let everybody know if they're out.
@calebfpc Жыл бұрын
Are you going to sell more of these?
@SATSMotors Жыл бұрын
Yes! Final version will be available in August.
@airekofvinlandslayerofthes7965 9 ай бұрын
Can i buy these??
@SATSMotors 9 ай бұрын
Yes! Contact satsmotors@gmail.com
@lanei2103 9 ай бұрын
Hey. Jaki koszt z wysyłką do Polski?
@SATSMotors 9 ай бұрын
About 30-35 EUR. Contact Satsmotors@gmail.com for more info.
@lanei2103 8 ай бұрын
Nie mogę wysłać wiadomości na na maila dotyczącego zamówienia???
@Nakkisampyla 5 ай бұрын
Pimeä kass