Finally! SwissQlip, A pocket clip for your Swiss Army

No video

Finally! SwissQlip, A pocket clip for your Swiss Army

Рет қаралды 29,795

Living Survival

Күн бұрын

Пікірлер: 85

@illmade2 4 жыл бұрын

For generations people have been forced to carry a pocket knife in their pockets, thank God someone finally changed that.

@blkgostnone4092 2 жыл бұрын

🤣🤣🤣🤣 this is gold!!!

@sameold77 4 жыл бұрын

I wanted to try this but too many cons, glad they changed the SwissQlip so it is a little deeper carry but looks like there is still a hang up point. The "P7" key chain clip you showed is the best option IMO and it only costs one dollar. I've been using them for many years and love it as it allows the SAK to sit deeper in the pocket out of the way. Plus there is no risk of a screw coming loose and losing it. Thanks for sharing this though as it is good to see a company make this to try and fill a niche.

@Exist_Outdoors_ 4 жыл бұрын

You did a good job showcasing the product and the effort that went into the design / manufacture of it. Definitely something I’d like to try. Thanks for sharing Ben.

@livingsurvival 4 жыл бұрын

Exist Outdoors yeah I mean it’s expensive but it was thought out.

@jeffslaven 4 жыл бұрын

I really like this concept. When they come out with one for the Alox models, I'm grabbing it!

@somewrestlerfromcalifornia4582 3 жыл бұрын

Same

@davidburgess5689 2 жыл бұрын

The new ones have a flat head screw, so you can tighten it up with the tweezers. Huge improvement.

@PREPFORIT 4 жыл бұрын

Using the keyring clip/hole? = Brilliant ! Now the SAK is even more versatile ? The future is NOW.

@livingsurvival 4 жыл бұрын

Fo Sho

@deionbeeldenstormer7498 4 жыл бұрын

Looks pretty sweet! I previously used a Nite Ize HipClip (adhesive pocket clip for small items with a flat surface: folding knife, SAK, power bank, etc.); works quite well. (Currently $7.52 on Amzn)

@livingsurvival 4 жыл бұрын

There ya go. Didn’t think of that one.

@duncdunc76 4 жыл бұрын

I've used that Nite Ize adhesive clip on my trekker as well and it works pretty good but is not deep carry and it is raised off the knife scale which has been annoying in the past when attaching to some of my pants. Now I just use a regular deep carry pocket clip off of a cheap Kershaw I had. I simply positioned the clip where I liked it on my one hand Trekker and marked the holes with a marker. I then used a drill bit that was slightly smaller then the screws that attached the clip to the Kershaw and drilled into the scale on the Trekker just through the scale but not into the metal housing beneath. Then I just screwed the screws into the scale. It worked great and is holding amazingly. I'm sure it's not as strong as being tapped into the metal but it has worked great for me.

@alexwbanks70 4 жыл бұрын

I've been wanting a Trekker. Hope they come out with one for that knife.

@PowerMadHeadBanger 2 жыл бұрын

It would be so easy for Victorinox to provide a pocket clip out of the box.

@Motorcyclewindtherapy 3 жыл бұрын

If this had existed and worked for Alox models a dozen years ago, my SAK Cadet would never have stopped being my EDC! Dang. Never cared for the cheap feel of the plastic scales. Bit Alox Cadet or Farmer are great. I did use a P7 for awhile, but it's not a real pocket clip like I'd like, as you said. Now I couldn't imagine not having my old green aluminum/satin Benchmade 940, I'd just never go without it.

@Surago 4 жыл бұрын

I’ve just gotten used to carrying mine in my pocket. It bothered me at first but it’s not so bad now. Worst thing is all the stuff lint and gunk and sand that gets into the knife

@livingsurvival 4 жыл бұрын

Surago right. Sign of use though!

@AthosSales 4 жыл бұрын

Very good video! And this wrench set is very cool! 😃👏🏼👏🏼

@MrJimJD 4 жыл бұрын

Good video Ben. Think this will be ideal for my SAK Huntsman. Wish they could do one for the larger locking models (like the Outrider). ATB

@pnwadventuresandgearreview8749 4 жыл бұрын

Happy new year Ben what a great little Mod thanks for sharing

@DougieFrank 2 жыл бұрын

Excellent review - thanks man !

@daveshereduh 3 жыл бұрын

Will this fit on a Compact?

@DrDennis 4 жыл бұрын

Good item

@wumbo5560 4 жыл бұрын

I really hope they make them for the 58 mm models

@survivalofthefittest409 4 жыл бұрын

Would love to see one for the Trekker series, and larger, one handed, models.

@OsOQRT 4 жыл бұрын

I've been waiting a long time for this product omg thank you so much! Wait will this fit the Trekker series of SAK's?

@livingsurvival 4 жыл бұрын

Grizzly_OsO don’t think so. List in on their website.

@OsOQRT 4 жыл бұрын

Thanks for the reply I will

@troyjenkins3886 4 жыл бұрын

They need to limit the space between the clip and scales,too much of a gap that looks like it can cause a lot of wiggle.I would replace the plastic tab with metal because if your like me,I use my SAK's multiple times a day and not sure how long it will hold up.All this being said,having the option of a clip makes SAK's that much more useful.Thanks for the content.👍

@themiwoodsman7222 4 жыл бұрын

That's pretty cool and it looks good! hope you and your family have a great 2020 ! atb john

@livingsurvival 4 жыл бұрын

you too John, let's make this year our year we camp out.

@themiwoodsman7222 4 жыл бұрын

@@livingsurvival right on it is way over due! Looking forward to it.

@VRCM_Skywarn_XUSA 3 жыл бұрын

This works on the Fieldmaster & Huntsman? Looks like the same as mine. Anything thicker than 3/4" is commonly not wanted as a pocket knife. Someone took a census...and asked.

@socaloutdooradventure 4 жыл бұрын

Happy New Year pal! That is awesome!

@livingsurvival 4 жыл бұрын

thanks!

@johngeoffreyvincentfrancis4866 2 жыл бұрын

Nice review. Would you know the exact measurement of the screw so i could procure replaceable parts? Stay safe!

@MascaratumBLF 4 жыл бұрын

Ben, any clue if it will work on the Evolution Wood 17(wood scales)? Thanks for showing this 👌🏻🛠️

@cowboy4378 3 жыл бұрын

The guy said multiple times that it’s only for 91mm models

@edwardannable5468 4 жыл бұрын

I have 6 of them

@LegalAmerican4 4 жыл бұрын

You must be rich

@roy-batty 4 жыл бұрын

Dude, the price on that is almost the price of my SAK Hiker itself.

@automaticenforcer9051 4 жыл бұрын

It’s a good idea but it’s just ridiculously expensive I’d want it to be made from titanium for the price. 10 - 15 would’ve been more reasonable. The only person that would buy one are people who carry SAKs everyday / and or really love saks

@freddiedorris3788 4 жыл бұрын

Happy new year Ben to you and your family . Really digging that clip , I like it a lot 👍👍 been using those clips as well

@TheBlackwater200 4 жыл бұрын

It’s 2020, and I think I’m still alive......yeah, there’s a pulse.

@MusikPiratCH 2 жыл бұрын

I really don't understand this Clip & Carry product for the 91mm SAK from Victorinox. Victorinox offers pouches, chains and even a clip themselves. There you don't have these problems with the screw, etc. 🤔

@jacobmanalang8162 4 жыл бұрын

not to take anything away from tec. they innovated so many great edc designs, but if you look up pocket suspension clip on ebay they sell them for a dollar or less depending on how many you order. the urban prepper recommended them in a vid. im looking for a pocket clip for the victorinox spirit. i want to buy it instead of the leatherman wave plus BUT the wave plus just makes too much sense for what i need. ill end up with both. i carry an alox cadet or pioneer, and a juice or skeletool so these wouldnt work for me. im a pocket clip guy but recently ive been told to try out a leather slip...might fit my needs better

@jacobmanalang8162 4 жыл бұрын

if i had a sak that would fit it i would snatch that clip up in a heart beat

@double-oh7200 4 жыл бұрын

Still alive and kicking!

@bobwampler3387 4 жыл бұрын

This is awesome.

@GriffMJ 2 жыл бұрын

...had one didnt like it ... it was too bulky .... so I bought a "nanoClip" by key|Smart (at a fraction of the price.... and a better option).

@ditran2255 3 жыл бұрын

I like your screwdriver with all the bits attached. Could you tell me the brand and model please.

@livingsurvival 3 жыл бұрын

Wiha

@ditran2255 3 жыл бұрын

@@livingsurvival Many thanks.

@Tigerxx89 4 жыл бұрын

Are they ever going to make one for Cadet?

@ElementBushcraft 4 жыл бұрын

You're trying hard to justify the price before we even know what it is, must be a dreadful price 😳

@thedowntrodden1522 4 жыл бұрын

It's 25 bucks and you can't even use it with alox they lost me at the fact I can't useit with alox if they made a pocket clip for the alox Cadet they would have it

@williambartlett1054 4 жыл бұрын

$25!!!! You have got to be joking! That's only $3.50 less than I paid for the victorinox huntsman! No, I think I'd rather just carry in around in my pocket!

@DJJAW11 2 жыл бұрын

... What's your screwdriver,you are using sir ?. Love from UK 🇬🇧🇺🇲

@livingsurvival 2 жыл бұрын

Wiha tools

@DJJAW11 2 жыл бұрын

@@livingsurvival Oh really, many thanks. I do have there stubby one, with torx bits in handle etc!.

@saulvelaquezcorrea6405 4 жыл бұрын

Donde conaigo esa herramienta en forma de pluma ?

@Denbeeer 4 жыл бұрын

A pocket clip for a Victorinox? Why? To expensive , to bulky and makes the classic sak looks ugly. Not my thing

@LegalAmerican4 4 жыл бұрын

I would absolutely love this but NO WAY for $25. That price point is absurd for anything that is nothing more than a clip. I'm sure it's nice, I'm sure it required lots of technology to create, but when you can get a decent variety of great SAK's for that price range, no way I'm spending that on a clip. Everyone else, enjoy!

@JohnSmith-gs4lw 4 жыл бұрын

Suspect you could even get a Nite Eyes mini biner through the top of that SAK clip if you wanted to put a backup lanyard on it so it doesn’t get lost out of your pocket or your pack. Then again, if you let the knife ride down in the bottom of your pocket like it was designed, you would lose it either.

@skinnysfishin7066 3 жыл бұрын

Does it fit the Victorinox compact

@faethe000 4 жыл бұрын

You say you use the toothpick all the time. What for?

@livingsurvival 4 жыл бұрын

Picking my teeth.

@BigRed-oi6ky 4 жыл бұрын

$10-15 maybe but $25 I'll pass

@cowboy4378 3 жыл бұрын

Probably cost $1.25 to make

@woodentulike2no 4 жыл бұрын

WTF??? Where do I order these? I need at least 10 of them!!

@insanogeddon 4 жыл бұрын

A humorously expensive solution for trend .. when did 14yr old girls start carrying SAKs? It blocks tools, creates hot spots, adds weight and makes you print like you're carrying a tactical weapon knife - target acquired! Quick access clips make sense on an emerson chisel not for a POCKET KNIFE it is like putting a "sniper" scope on a double barrel shotgun lol

@EdSaenzDrums 4 жыл бұрын

Nite Ize hip clip. Less than $8.

@fsevilla1 4 жыл бұрын

i bought this clip and trying to mount it on a swiss champ but i cant install it even when they say it does on the packaging I'm i doing something wrong ?

@LegalAmerican4 4 жыл бұрын

$25 for one clip it should leap from the packaging and install itself

@xcynn3rx 4 жыл бұрын

It's still a sak wtf?

@mc1996 4 жыл бұрын

Way to expensive...i mean, its more that the average entry level SAK and its not a bolt on for any model and it doesnt look to work all that good. Have read that the screws and the clip get lose very easily. Will wait until the chinese friends start to make this ones for like 2$...

@believeliveloveandlaugh3844 4 жыл бұрын

Nice but expensive.

@djkmark 4 жыл бұрын

Check out swissbianco . com he has them. I’ve had one on my one hand trekker for about three years as well as glow in the dark scales and they have been great. Check out my pic on your Facebook post from about a week ago.

@livingsurvival 4 жыл бұрын

Cool man, thanks

@doctoruttley 3 жыл бұрын

2020 was a disaster...

@cowboy4378 3 жыл бұрын

This guy spent 12 minutes telling me how good a pocket clip is.

@SgtSly 4 жыл бұрын

Hard no. This thing is clunky, not even a good pocket clip, and prohibitively expensive. I’ll stick with the TEC clip. It more than half the cost of a SAK for goodness sake!