GREAT JOB. I love the way you keep Mr. Spinner from rippin' the edges off !

I HAVE picked boards like that up, and I do have respect for Mr. Horvath. God bless him! 😀👍

The flag is a Michigan State Flag. It is showing the State Seal or coat of arms. One phrase on the flag in Latin translates to "If you seek a pleasant Peninsula look around you. Guess I really did learn something all those years ago in Elementary School !! :)

it never gets old, I can watch him saw trees all day..

I have very much respect for Eddy.. I'm a 45 year's at diesel mechanic and I've set up Mill's and worked in them nothing else about it.. keep up the good work I enjoy your videos... keep them coming..

I can watch this all day. That is such a well designed and built mill Smooth and powerful.

Great respect for Eddie, i bought a Woodmizer LT15 manual about 6 or so years ago. I cut and off load. Its a good work out. Just love watching you guys saw.

I was going to mention moving in the end of the roller label, but you beat me to it. Would love to see you guys rip the other boards through the edger so we can see ALL of the final product. Thanks, Eddie and Mark.

Great video Mark........ The sound of that Detroit talking and the saw singing is the best sound you could ever hear........ unless you haven't sawed lumber before you would not know the feeling......... it really feels good

as teenager worked very little at old sawmill loading the lumber very hard work but but off bearer has the roughest job there thank you guys

Good video Mark. Glad to see you got the plate. Looks good on the wall.

My brother told me to check you out. What a nice operation. Wow to see all that fresh cut wood. I used to do some wood project; mostly recycled wood that I found at work. I have a CNC plasma cutter. I used to work in a small steel fabrication shop. The company let me use steel scraps to learn my machine at home. I make small signs and plaques. It was good to see you but I am jealous as can be. 😫😫😫😫😮😮😮😮😀😀😀😀

Hi mark. What a great channel and Informative. May I wish you good luck and keep going. I also wish eddie all the best. Andy Thomson Northampton uk.

Great video again gents, as said before can we see the edger in action..big smiles from the UK

Another great video what teamwork who needs electronics when each know what the other will be doing superb

You guys get some really nice lumber... UR very fortunate to have access to such variety and quality! ;-)

Nice sawing! I like the idea about the license plates. Doing well here in Ohio. Will be back and forth for weddings between August and October. You just might see me sooner than you think! Take care!

The old Detroit is earning her diesel today!

That was a couple of tougher logs than most, but, hey you guys are awesome 😎

My dad and I had Osage orange sawed for decking in our livestock trailer that has lasted over forty years and no treating. We used oak but it didn't seem to last as long

Those drops would be great deer mounts with live edge

Man was that 6-71 ever screamin' in this vid. Dense hard oak I guess plus you were pushing it pretty good. Those DD 2 strokes just go on and live forever.

The Detroit is fascinating almost hypnotizing. Could you do a video on it please. What’s it’s history. How many hours on it. Has it has a rebuild. How often do you change the oil and filters. How many gallons per hour fuel usage etc.

Seriously...I do enjoy your videos.wish I could meet the two of you & talk 'sawmill '.Working on getting an Ark.plate to you.

Enjoyable pair of gents. I really need to arrange a day trip to look over buying some of the cut offs.

Eddie makes it look easy, that's for sure. No way I'm lifting any of those 2" oak boards!!

That poster is great!

David Clark head sets. We use them in all of our emergency vehicles and aerial apparatus from the turn table to the bucket or the tips.

Good video Mark some good boards

R E S P E C T ! -- Eddie !

Y'ALL should get za wood pellet machine use it to make wood pellets out of the sawdust.

Thanks, enjoyed this.

Good job Mark!

There are relatively cheap ($35 per unit) communicators you can get that are license free. Business band might take a registration or (I forget the other band name, maybe PCS? It is for personal area communications.) But put them on the lowest power and nobody will ever hear you. Tiny antennas so it won't snag. Put it in your pocket. What would be nice is bluetooth on it for cordless earphones. So for less than $100, you can probably get set up.

I just love your show’s keep cutting l have learned a lot from watching you guys

It amazes me how you can see what needs to be done to get the most yeald out of a log. Ok, you have the lazer line and dial for width of the log. Keep on cutting.

Good sawing and toting and the old sawyer/logger was bad to cut stuff into halves and thirds and have pieces flying all OVER the place and giggling watching us TRY and keep up with it all. I sure miss that old turkey but sawmilling is probably a good reason I'm still here. And draglining. Now I can creak, pop and snap and say there's a reason for it. Not like you and T.H.E. that'r still limber and fragile (agile was the real word but a pal sort of got it upside down). Mercy at the people that have put up with me. And if you could hear me talk you'd know that Mike and Maw aren't too far away. Thanks, Mark and T.H.E. The best 2 yall and GBWYou!

Hello Mark and hello Eddie , love the bus motor flag did you ever think about making shirts out them ? that would be cool thanks for sharing and you all have a great rest of the week take care

Hey Guys, awesome videos, thanks... bar room ??? are we able to see it a all?

The headphones you need is SENA Tufftalk Over-the-Head Earmuff with Long-Range Bluetooth Communication. Iron&oak sawmill KZfaq channel uses them and thay done a video about them. I plan to get a set for my sawmill when I start sawing. Warning thay are not cheep. I live about 20 miles from where your sawmill was made. I always enjoy your videos. Thanks.

Nice video Ed and Mark, I was wondering if you ever though of putting a camera on the last dog so we could ride the log?

Hello Mark and Eddie. Another enjoyable video this week. Sorry to keep pestering you with enquiries, but I am really interested in how your mill is running! This weeks question is about lubricating the machinery. The log carriage, log turner, loader and conveyor are in constant use when milling, so how often do you have to grease the wheels, track, pivot points and cables in order to maintain their smooth running? How long does it take to complete that maintenance? I agree that it would be good if you had two way communication with Eddie! Best wishes to both of you and your families! Take care and Stay safe! Stan.

I've piled 2x12 20 ft green poplar, so I can appreciate the weight he is pulling.

My state flag... Michigan. 'United We Stand', our countries motto on top.

It would take three men to keep up or replace Eddie! I have no doubt!

Hi Mark and Eddie love you video

I am a member of ALR American Legion Riders and the flag has the Eagel of ALR on it!

Yes your channel and the McCoys channel is the best on the net 👍

Thank you guys for working so hard

When those heavier, bigger logs roll on to the carriage or when you flip the heavier, bigger logs, does that ever knock the carriage out of adjustment? Thanks for another relaxing couch video. You and Eddie stay safe.

It's a strange feeling of utter fascination to watch that round saw slicing through its targets... Practically hypnotizing for me.... Irrelevant aside... Whoever named the master dog as such really missed a bet.... It's obviously the "Top Dog"... Gary

Óh yéah no lie that wood looks heavy. No need for a challenge.

Thank you for the video.How much lower would you make the deck than the carriage?

how much are you asking on the decking?

One of longest Videos yet, but better than watching TV, i was going to ask how wide a board can you cut before it hits the log ramp, but i see the board stack must go over the ramp. i like those thin boards i made a Lamp Shade once out of some maple, is was about 3/16'' thick, and i played with it for about 2 months and bent it round, before it split, so i clued it together in sections, $50 lamp shade with $2000 in labor.

Bus mptor plate on the Bus Motor, LOL. Those boards out of the last log looked like furniture grade lumber ("1A" ?)

Yes my name is Daniel Benitez and yes I have done that kind of work before it is very hard work I have a lot of respect for him and if I could I would love to come out there and help cuz I love the whole process

Bus motor plate on the side of the bus motor. Those last boards on that second log were furniture grade lumber. ("1A"?)

I really like your videos. I signed up since the first video I saw! Could you say the name of the song that plays at the beginning of the videos? Thank you from Brazil!

The Michigan flag must be flown slightly higher than any ohio state flag in the area

I apologise for lack of clarification. The flag is supposed to be a Michigan State flag, I didn't open it when I received it. The plate looks good.thanks Lee

Hi mark was wondering if putting some measurements with thick black marker on the yellow pushers so when the camera pans back we can see roughly how thick the cuts are

Mark very cool sawmill my grandpa sawmill was almost identical to yours except his was all mechanical you had to turn the logs by hand and you have to set the dogs by hand I know I got pictures of it somewhere but yours though seeing it through the videos that you put out takes me back to when I was a little kid and you had to set the board thickness by hand too! What model is your mill?

Where do we send the plates, Big M? Got my old Texas set of Purple Heart plates to get to ya

HI MARK I ☺😊🙂🤗😀😄 know all about working 💪👷 at the sawmill that was my 1ST job after I got out of high school packing lumber and railroad ties all day 😅🙃😄😀🙂😬 I started in the hay field when I was 14 teen when I 1ST started we would cut hay 5 or 6 times a year square bales 1,OOO bales a day the young people today don't what hard work is OMG 5 13 2O22

mark is that the new blade you're using or is it still in it's crate against the wall?keep them logs rollin.thx.

Mister Mark what causes a log to have tension in it I know what it is I just don't know what caused it thank you love your videos be safe and have a great day Sam and a Happy New Year

What state are you located in I like watching your videos very educational very learning Your work is hard but the woods not that heavy

Mark how often do you have to sharpen the teeth on the blade? Does it depend on what wood you are going through?

When are you going to finish building the sawmill shed over the outfeed table where Eddie works

Hi Mark really enjoy your channel . If you watch outdoors with Mike Morgan he promotes a great set of hearing headsets . phone ,wife ,hearing protection . I am out in Orillis Ontario Canada . have a day eh .

I could watch this for hours. Why is that, I wonder? In 1965 or thereabouts, Eric Sloane wrote a book called A Reverence For Wood. Maybe that's it. Yes, I'm sure that's it.

The flag you asked about is the state flag of Michigan. :)

What is the moisture content of what you cut? Does it need to be dried before cutting?

Michigan flag latin translated The design features three Latin mottos. From top-to-bottom they are: On red ribbon: "E Pluribus Unum," means "Out of many, one," a motto of the United States. On light blue shield: "Tuebor," means "I will defend." On white ribbon: "Si Quæris Peninsulam Amœnam Circumspice," means "If you seek a pleasant peninsula, look about you." (The official state motto).

Peltor make great headsets with speaker mics.

What news on the kiln guys?

So who owns this saw mill Mark or Eddy or is it a partnership

You received the first flag on April 24th. How many have you received since then?

Hi Mark and Eddie followed you a long time from Thailand ,what happens to the large irregular pieces you remove when getting a log straight ?

The blue flag with the crest and two deer is the state flag of Michigan

do you have any vids of you guts edging timber at all? id love to see it

What is the value of the sawmill? You are a company that manufactures the sawmill.

Also Mark I see the flags that you have in the mail do you have a flag from the state of Wisconsin? That is where I am from

Check out Bluetooth headphones with a mic. Found at most good phone stores.

Why don,t you put a latch on the roller table.

Does Eddie ever operate the Saw?

Michigan Flag Flying Higher The The BuckEyes Flag > YES = GO BLUE UM > Ann Arbor Michigan

39:00 Got then ends EVEN !

Michigan state flag. latin at bottom says If you seek a pleasant peninsula, look about you.

U mean top dog 🤪

Many comments: "YAY MICHIGAN!" Me, an Ohioan: "College football sucks and the entire rivalry is old." Also me: #FlyEaglesFly

Go to Vbelt on you tube and see the headphones they use

Michigan's State Flag

What are comments for

That nub would Lathe into somethng

that flag is the Michigan State flag.

That's a State of Michigan flag. The motto means "If you seek a pleasant peninsula, look about you." (Note that it is neither a University of Michigan nor a Michigan State University flag.)

The flag resembles the state flag of Michigan.

That is the State Flag of Michigan