I always enjoy watching the Master. Part of this enjoyment is that he is satisfied with his work and position and is NOT constantly trying to sell himself or any products. He doesn't beg for responses or subscribers. But mostly because he fully understands what he is doing (and most of the other ways of doing it) and is very good at articulating this to the student. Thanks again, to all involved in the making of these videos.

I haven't watched a Paul Sellers video in a while, it is one of the most informational and relaxing uses of time that I can find on the internet. Paul, you have layed the foundation of my fine woodworking, and I look forward to learning more

As ever, I just love the slow unhurried pace of these videos. Also great for learning about shellac, obviously. And then there's Paul's work, which is, as ever, a work of art. Fab!

because of Paul, I tried using shellac for the first time. I first used a 2lb mix and a foam brush. It left a lot of streaks and brush marks because of how fast it dries. Much more sanding than when using poly. I tried thinning it to 1lb and it was a bit better. Then I tried using a soft rag to apply it and I found that was a better option than a brush. The final product is very nice though, and the speed at which it dries is obviously a big bonus.

I believe that listening to Paul describe what he's doing provides as much as watching him. He'd be a great story teller.

Paul, thank you for taking the time to explain each of the coats and the goals for each step. Very good video!

Humble as always Paul. It's a pleasure watching you work and sharing your wealth of experience. Thank you!

Beautiful. I love how the grain and figure comes out after the finish goes on.

The reason Paul is a master is that he understands subtlety. Too many new wood workers think contrasting walnut and maple is the way to make an eye-catching piece. Paul will show you the beauty and elegance in an understated wood craft. I admire the tone of the wood, the construction, the joinery. Subtley.

As a novice, this is the only time I've seen someone use the steel wool and wax. Thank you so much. So many people say it but no one shows it.

Best part of woodworking, applying clear finish

Paul, you are the most amazing teacher. I am subscribed to 100's of wood working channels and none can hold a candle to you. you detail every step taken and describe each with such precision to the point that we can imagine it in our heads. Amazing, simple amazing! Wish I could study under you!!

This was such a great help, I can build a lot of things but I'm clueless when it comes to finishing it. This video was a huge help. Thank you

Have been looking at many demos and this has made it an easy way to to tackle my item.

You are not only a great woodworker. You are also a great teacher. Thank you

I'm just finishing a #26 I just restored with shellac. I've been using shellac my entire life as a finish. I'm 70 years old and my father loved shellac as the finish for the trim and wood work in our house and I did a lot of 'shellacing' and I took a couple but I still learned a couple pointers from the expert after all these years.. Love it. Thank you, Mr. Sellers.

Such humbleness is the source (or maybe even the result, if I would go in the phylosophy way) of true mastery and skill. Amazing display of work Sir Paul. And regarding being thankfull, it's us that should say thank you!

This is really helpful. I am quite clueless when it comes to finishing projects. I would like to see similar videos for varnish or poly. Thank you!

"because that`s who I am" . The Master.

“I can’t see what I’m doing there....but it looks great” only Paul can apply sealant blind....incredible work as always!

I just started using shellac for finishing. I really enjoy it.

Thank you Paul, I enjoyed watching you work and i love the finish which I'm about to try on a small project right now. All the best mate.

One word, "excellent". Thank you.

That stool reminds me so much of the first school project that the class had to make, the idea being that it would be used when going to watch Plymouth Argyll if playing at home - something the sit on at half-time and something to stand on during the match (we were only small then).

Loved this video Paul you are the best woodwork I've ever seen I really appreciate all the time and effort you put in to making these videos would love to see more like this using other finishes

Glad I watched this. Thanks For the detail Paul.

Excellent information, great patina finish, thank you Paul...

Nothing beats a source of sunlight in the shop. I have a spot I use to reflect off surfaces I’m working on. ☀️

Master of his craft.

I could try for a 100 years and not get that finish but I'm not going to give up yet. I guess some people simply have it. Lovely job Paul and thanks for sharing.

A wonderful video, thank you. I enjoy your laidback style, a reflection of the confidence of a master. I learned a lot.

Nobody makes painting interesting like Paul does.

Wow, I started watching reluctantly and got hooked. Thank you sir for this wonderful video. I am working on a work much in my garage and I will follow your advice. I will use shellac bought from the store. I hope it is the same application.

That's because it is nice! Thanks Paul.

i really enjoy watching this. this make me smile the entire video, because i know he realy like what he's doing.

Bob Ross of woodworking!

Shellac is a beautiful finish.

this is the part of the projects where i am usualy keen to finish, and always rush the finish. Always end up regretting not spending enough time on finishing. really useful tips.

This could not have been shown any better and at a great time for me. Just received two bottles of Shellac for a Christmas present ..lol great timing ehmany thanks

Finish perfection could not be demonstrated better.

Paul,Your shellac video reminded me to start using it again. I have tended to use water based polyurethane or tung oil to finish shop projects. Thanks again for the artful demo and reminder.Bill

Thank you for sharing. Have a blessed day.

I've always been a fan of shellac. It does so much more to the visual nature of a work piece than most other finishes. Not to mention it's way easier on brushes. Denatured alcohol is very mild compared to paint thinners and mineral spirits you have to use with oil based polyurethane finishes.

Nice job Paul, and happy New year with a great videos!

Simple and beautiful.

Lovely demonstration. Thanks

Beautiful job

I find watching any of your videos extremely relaxing. I can't help compare watching you shellac this bench is similar to watching the late Bob Ross painting his beloved trees :) Happy New Year, Paul, from another satisfied subscriber!

great video I've been in the decorating trade all my life always wanted to work with wood Paul is as good as you get

I used to work at Bromel paints many years ago and I made all the old henry flacks shellac polishes with all kninds of waxes and shellacs button shellacs amber flakes blondes etc. and we did all the briwax as well great days fond memories.

Lovely bench/stool. I've never sat through a whole brush-on video before, but something about you makes it interesting.

Just watched this again: still the same impression: excellent!

great video Paul. I like how you say "muh brush"

Great video, thanks for sharing ...

I am terrible with a brush so I typically pad it on with a tampon.i have been amazed at the explosion in schellac prices.

I love shellac too. Amber, clear, dewaxed, dark... all of them are great. Let’s the wood speak. Well done.

I'm in a Zen state after watching this.

Unintentional ASMR. Great stuff.

Thanks so much for sharing.

Beautiful! Very interesting. I really wish you had shown us the final buffed-out gleam after the horse hair brush. Your project is beautiful. Anyone would be pleased to have that in their home or household! Beautiful!

Love it , good on you man !!!

This demonstration is very loose and relaxed, yet filled with a subtle radiance of deep deep soulful passion! Elegant, understated beauty of a master in no hurry whatsoever. Thank you!!! Thank you for taking your time making LOVE to that stool! Just plain enjoyed watching this :):)

Thank you Sir!

cool. great work!

Thank you!

Nice video. I wish more people would find the ease of using shellac. I've been using shellac finishes for years even on dining room tables. The ONLY problem with using shellac on a table is alcohol will cause a problem. I've recently used amber shellac on a pine floor. It builds character that you just can't reproduce any other way. The shelf life of premixed shellac is a problem. Mixing your own from flakes is easy and the flakes keep forever. You can also find flakes from absolutely clear to a dark garnet which provides may different color variations for finish. My latest project was an 18th century high boy made in cherry with a blonde shellac. After 6 months in the sun it is absolutely gorgeous.

Nice! Can't wait to see you get past one million subscribers! Cheers!

"Can't see what I'm doing but it looks perfect."

2015? That is one heck of a lead time! :-D

Excellent

Top shelf.

Thanks!

I love the simple but elegant curves of this little bench. One can perceive the work of a master in its construction.

The hake brush with goat's hair bristle is also available in the US on eBay.

Very nice.

Was thought this method in school in 1970 easy looks great and lasts

Bob Ross of woodworking

This man is soothing.

Could we have an update on some of your shellac projects I’d love to see a before and after side by side :) happy new year

Nice job sir

That brush slide at the end is the mic drop of Paul Sellers

Paul Sellers is the New Bob Ross.

Nice job Paul, Happy new year mate.

This man was a tree reincarnated as a human being! He knows everything about wood!

I've only used shellac a few times, but I'm not sure why other finishes exist. Shelf life is the only real complaint, but if you get flake, and are willing to wait 24 hours after mixing, then the shelf life is forever.

Paul protecc, Paul attacc, But most importantly, He really like shelac

nice way to start the new year off, by puting a vidio on from 2015......

Absolutely beautiful piece and finished to perfection. I've not made up shellac before, is there a particular brand you would recommend?

Your videos are excellent and I remembering all my woodwork teacher taught me over 40 years ago, could you put a link on where you get your brushes and products from.

Many thanks.

Great video thanks! I’m a better person for having seen it. Cheers!

What kind of brush is that and where can one get it or make it?

If you buy Zinsser shellac, you have to cut it before you will get the kind of finish Paul has in this video, from my own experience. Probably needs to be cut with denatured alcohol by about 1/2.

Great video and great hair.

Mr Sellers, it is a lovely piece. Can you recommend a specific brush bristle and/or brand and/or supplier? The application process can be much less satisfying than you have experienced when bristles are being continually deposited in the finish .... this from EXPENSIVE brushes! Thanks.

Is it French, Polish or Finnish?😝

Thanks so much, Paul! Beautiful work. I'm curious about how you clean your brush. Do you just let the shellac dry on it and use the same brush for shellac next time? Flush it with denatured alcohol? Something else?

Happy New Year Paul and looking forward to another great year of videos.

Hi Paul. Does the same go for Sanding Sealer that you seem to find in most of the hardware stores here in the UK? I bought some recently and it's got quite a creamy look to it and also when applied so should I be thinning it a little with white spirit?

Thanks for sharing your ways of doing things. I was wondering, how do you store the brush while the finish cures or between two projects? Thanks again.