First 2 Story REAL CONCRETE Printed Building in North America

Рет қаралды 22,725

Жыл бұрын

Nidus 3D isn't afraid to show us the details of what wen't well and what didn't on their Cobod Bod 2.5 construction printing system! Huge shoutout to CEO Ian and his team for their outstanding transparency and dedication to exploring the unknown world of 3D printed construction and automation solutions on the job site. In this video we get to hear from the Nidus 3D founder what challenges and efficiencies they discovered working with their system in Ontario Canada. This 2 story building featuring a workshop in the bottom floor and an in-law sweet on the second floor was permitted according to CSA standards (screw AC 509). For their next project they will be 3D printing a basement right in the middle of town!
“How to 3D Print a House” Course - automate.construction/course/
Automate Construction Podcast
/ @automateconstructionp...
Automate Construction Website
automate.construction/
How I make money$$$
“How to 3D Print a House” Course - automate.construction/course/
Book a Consulting Call - jarettgross.youcanbook.me/
Virtual Village - automate.construction/virtual...
MY EQUIPMENT (paid affiliate links)
Drone - amzn.to/3OIgGsm
Camera - amzn.to/3NqPSMl
Vlog Mic - amzn.to/3OyrzO6
Podcast Mic - amzn.to/3udRTVF
Tripod - amzn.to/3bCNIw5
Japanese Handsaw - amzn.to/3bCNIw5
Roomba J7 - amzn.to/3QneRC5
Follow on Social Media
Facebook - / automateconstruction
Linkedin - / 81956758
Reddit - / automateconstruction
Twitter - / jarettgross
Instagram - @automateconstruction
/ automateconstruction
TikTok - @automateconstruction
www.tiktok.com/@automateconst...
Write an Article for www.Automate.Construction
automate.construction/upload/
Submit a project I should feature!
automate.construction/upload/
Nidus 3D
nidus3d.com/
Cobod
cobod.com/

Пікірлер: 55

@nidus3D Жыл бұрын

Thanks for stopping by and sharing our story Jarrett! Always a pleasure!

@automateconstruction Жыл бұрын

Keep up the great work can’t wait to see what’s next!

@IFAMILYIH Жыл бұрын

@@automateconstructioncan we get an update on this home it has been 2 months

@cureworks Жыл бұрын

A two story print, more proof that we are limited only by our imaginations. Thanks to all involved in this production. Eye opening, to put it mildly. One step closer to printing the Empire State Building, one floor at a time. I just love the innovation you are documenting in this dynamic field Jarett Gross. Thanks for this important information you are sharing. Blessings back to you and your family and crew.

@rollingstocks Жыл бұрын

These guys using the spatula are way ahead of the game. Those smooth layer lines are key. If the layer lines look smooth enough, it just looks similar to brick, which is acceptable as an exterior veneer.

@leonmilner9994 Жыл бұрын

Yeah they could also just paint it or maybe add in colouring(?) - would look similar to stucco.

@nobreighner Жыл бұрын

This is progress!

@ebuildingconcepts Жыл бұрын

Love it Jarett and thank you Nidus and COBOD

@budgetaudiophilelife-long5461 Жыл бұрын

🤗👍😎 JARETT…WE SEE 👀 AND WE LOVE 💚 the progress….slow but steady 😁 And HAPPY WE HAVE BEEN WATCHING THE WHOLE TIME 👏👏👏💚💚💚

@jfausset Жыл бұрын

First off, let me say I LOVE WHAT YOU ARE DOING HERE. This is incredible. So neat to see this progress in 3D concrete printing. I am an engineer (mechanical by education, electrical by experience) who's been watching this field grow for years, and I have so many questions and ideas about what is happening and now and where it is going. 2:50 You showed the print-in-place, grouted, reinforced lateral beam. That is profound. My biggest question about all of the 3D printing space has to do with the reinforcement: why can't we go to smaller, mixed-in rebar, something like the helical "microrebar"? 6:30 Why can't the code be met by creating a void of the same dimensions as the Sonotube? That seems like the engineer's liability, not the authorities' having jurisdiction discretion. 8:00 You say you are going to add chemical additives and adjust the moisture content to improve the wall texture/resolution. Do you think the screed is optimally long enough or has a surface smoothness? Is there a way to use a longer screed and a flow of water between the surface and the screed (a small drip using something like a refrigerator water tube)? This would simulate a concrete finisher's tactics. Thank you for this great video, along with your others. This is so cool!

@automateconstruction Жыл бұрын

Micro rebar is more likely to clog the hose Home inspectors work for the municipality so while an engineer could structurally approve something the town may not grant a certificate of occupancy I don’t know but I’ve noticed in this project they actually used a smaller screed than in the past.

@leonmilner9994 Жыл бұрын

Nice observations and ideas!

@leonmilner9994 Жыл бұрын

I think the usual screed works with gravity/higher viscosity - two things they might not want - but if it could be really smooth that could be cool. Good thinking on the sonotube - unless the tube itself is structural this requirement doesn't make much sense haha

@SteveMarksMusic Жыл бұрын

Amazing amazing amazing!!! You need a "smoothing team" that can smooth out the facade as it continues...

@leonmilner9994 Жыл бұрын

Love that they aren't afraid to just use a concrete truck for the next one! Simple solution - get the experts to do the mix for you!

@slartibartfast7921 Жыл бұрын

Loved the insight provided by these guys. If the boss wanted, he could always get a job public speaking. Excellent work.

@automateconstruction Жыл бұрын

If you listen to my podcast you’ll learn about his previous life as a politician

@slartibartfast7921 Жыл бұрын

@@automateconstruction So he decided to do something constructive with his life instead… gotcha 😉. I’ll take a listen 👊🏻

@iggmoeactual Жыл бұрын

@@slartibartfast7921 Constructive. I see what you did there!

@slartibartfast7921 Жыл бұрын

@@iggmoeactual Badaboom tshh 😉

@SamBourgeois-mr4hq 2 ай бұрын

@@automateconstruction No clue what his politics are, but his voice gives "a young Tom Mulcair"

@EstebanBarreiro Жыл бұрын

Im thinking attend your course. Also invest in this tech.

@Kupacolypse Жыл бұрын

You're a brave man for trying to sell that in Canada. I honestly can't imagine that competing with ICF. And ICF seems to me to be way more versatile. And probably better insulated. And stronger. I wonder how the costs compare.

@timgrimes8029 Жыл бұрын

We have a project in Austin, TX here in the states where the designer wants 3D printed concrete.

@jonathanmitchell1776 Жыл бұрын

Awesome!! Not sure why people go with COBOD though, sloppiest prints come from their machines.

@nobreighner Жыл бұрын

That rough surface is the mix with less cement and more aggregate than the bagged 3D mixes.

@jonathanmitchell1776 Жыл бұрын

@@nobreighner for a COBOD, it's a great print. 😉

@jesseabadie7872 10 ай бұрын

Do you know the pour insulation they used?

@wilsonpatino5067 Жыл бұрын

Hi, my name is Wilson patino from UK Exelent job

@Kiminsong193 Жыл бұрын

economical house.... good

@automateconstruction Жыл бұрын

I don’t know why you’re assuming it was economical the cost wasn’t explained, generally speaking the material, for these homes is quite expensive, which can be a significant factor in the cost.

@undertow2142 9 ай бұрын

Has anyone experimented with making the nozzle vibrate?

@bendover6032 9 ай бұрын

How long do these houses last and how much do they cost?

@imuneik Жыл бұрын

Do a test run with a hemp and lime compound and see how well it works…. Hemp is an extremely renewable resource because you can get a crop harvest around 7 months.

@automateconstruction Жыл бұрын

I keep hearing this but nobody is ready to do a video on it yet maybe it doesn’t work for some reason idk why they won’t try it.

@automateconstructionpodcast Жыл бұрын

Podcast with CEO Ian coming soon on this channel!

@builderfilmer Жыл бұрын

Yaaaaaaaaasss

@cupofkona Жыл бұрын

Any reason no Volcanic ash (roman era tech) not used?

@automateconstruction Жыл бұрын

I’m not sure they have volcanoes in Canada but most printed concrete features fly ash.

@nobreighner Жыл бұрын

Have to go and collect it, then maybe grind it to get full benefit.

@lucaslittmarck2122 Жыл бұрын

The future and best idea of 3d printing a house is to be able to do it cheaper.... This doesn't look cheap and when you produce something off site that you have to have a crane to lift in place then i wonder what the final cost is compared to conventional methods.

@automateconstruction Жыл бұрын

Tech is never cheap in the beginning it gets cheap with scale

@automateconstruction Жыл бұрын

Moores law