Watching a lad service a pressure washer on a Saturday night. This is what all the kids have to look forward to. Feckin mid thirtys.

While I love the Guru’s content for tips and overall enjoyment, I genuinely watch because he cheers me up with his comments and quirks. So, just saying I’m grateful

Love the way you used a 'general purpose towel' most of us would just grab the nearest rag :)

You can use an appropriately sized socket to press those seals home

Awesome video, well explained, couple of things I noticed the grey end of the high pressure hose usually goes on the gun end (unless the gun has a integrated swivel), also the small lance nozzles you are using are either worn or a larger size causing lower than normal pressure (unless you have it turned down on the red knob) lastly the oil may go milky again if the oil chamber was not completely cleaned.

i used to service and repair 'that other German brand mostly yellow, black or gray and begins with K..' and a tip for fitting new pumpseals is to grease them up, and let them soak in hot ( like tea water hot) for a little while. the chance of dammaging seals is less when they are a little bit more flexible, and yes there is a tool for that. I saw that the oil turned quite milky coloured. This might be caused by the plungers being damaged. check with your fingernail over the part where the plunger and seal(s) make contact, if you can feel any obstical, ( make sure it's not debree) than you should replace the plungers to.

Most KZfaqrs with this type of content you sometimes zone out. Guru has always kept my attention. Awesome content man keep it up glad to see the Kranzle got some love

Nice work. Its really satisfying when you can do something like that yourself.

Nice maintenance on the Kranzle; quality product and you know it will last you for years. Sounded quieter after the self service. Well done mate.

I love a good oil change. That old oil looked so water-contaminated

Tired as hell from the work today, but several minutes of the CCG (with the smooth accent) returns me to the world of living 🤤

Wicked job Joe many more happy years and prosperity to Brother don't ever stop love your videos and always look forward to your videos to inspire me 👍👍👍✅

Cool to see inside a quality compressor, nice one CCG.

Nice Video as always from the Pressurewasher Servicing Guru!

This is proof of how well the Kranzle power washers are build. Looking at the parameters, they are quite a bit more expensive when compared to similar Karcher or Nilfisk models, but it shows in how overbuilt it is. Despite being so neglected, it lasted for a really long time.

A really great in depth video!

Another trick for putting the brass rings, is to use a socket of the closest size, that way you get even pressure when lightly tapping them with a rubber mallet.

Repair not Replace! Kudos to you. Looked liked a good project.

Quality made in Illertissen, greetings from southern germany!

She has been good and will surely thank you for the tlc.