First Nano Reef Roller Mat Filter - Fluval Evo 13.5 Filtrations Upgrade
Рет қаралды 60,732
Күн бұрынIn this video, I create the first-of-its-kind roller mat filter for the Fluval EVO 13.5. Roller mat filters are popular because they are generally low maintenance but very effective at removing unwanted waste particles from the water. Roller mats are exclusively used in the sump tanks of the larger reef system but they are not available for small All In One nano tanks, until today.
This is the first in a line of roller mat filters that I plan on creating for some of the most popular All-in-one nano reef tanks, so be sure to subscribe and comment on which tanks I should make one for next. Watch till the end of the video if you would like to get a sneak peek of this future project. Checks out the video to see the entire design and build process.
If you would like access to the files please subscribe and stay for a future upgrade on this project.
iSealive.com Store Link
isealive.com/products/fluval-...
Etsy Store Link
www.etsy.com/listing/12575917...
Every purchase helps support me to make more reef aquarium-related projects.
Your support is greatly appreciated.
If you have a suggestion for something that I should make please leave a comment or shoot me a message on isealive.com.
Thanks,
OctZoa
- Video Content -
00:00 - Intro
00:56 - Fluval Filtration Overview
01:31 - Design Start
04:28 - 3d Print #1
05:16 - Finished Print #1
07:50 - Design & Print #2
08:20 - Assembly #1
10:26 - Finished Assembly #1
12:27 - Filter Paper Install
14:15 - Tank Install
15:04 - 3 Weeks Later Review
16:30 - Final Roller Mat Design
16:57 - Where To Get One?
17:25 - Signoff
@Drone-Pilot 4 күн бұрын
Perfect ! I’ve printed various things for my nano tank, I was looking for ideas and here it is! Thank you so much
@ISeaLive 3 күн бұрын
Solid, shoot me an email and I’ll send you the files
@areyouarobotz 2 жыл бұрын
Future nano tank must have.. thx
@montysreef8462 2 жыл бұрын
The world needs more brilliant people like you!
@ISeaLive 2 жыл бұрын
Thanks Montys Reef
@joshm7469 2 жыл бұрын
Really appriciated you showing the engineering process and development! This is too cool and would make for an excellent series.
@ISeaLive 2 жыл бұрын
Thank you. I have some really big projects that I’ve been trying to finish but everything takes so long when you only have a few hours a week to work on it.
@froger483 2 жыл бұрын
I completely understand u can send me things to try out if u dont have the tank cause mine is going and running just trying to upgrade like my intake refugium im decently getting growth but not the flow
@froger483 2 жыл бұрын
It si would
@soundsteve8936 Жыл бұрын
You're so clever. I'm very impressed. Well done!
@davestephens9463 Жыл бұрын
Your smart AF!
@stoneysscapes7544 2 жыл бұрын
This is the first time I've been watching a video that shows 3D printings and has me wanting to get myself started. Great video and a wonderful idea 💡
@ISeaLive 2 жыл бұрын
Thank you. You just have to get a printer, start using it and not give up. It can be very frustrating at times.
@johnbrand1893 Жыл бұрын
Great intuitive design and install for the smaller tank. Awesome video. 👍🏴
@ISeaLive Жыл бұрын
Thank you 👍🏻
@AquaSplendor 2 жыл бұрын
Hmm, have a feeling this is going to be a popular demand.
@ISeaLive 2 жыл бұрын
That would be cool. Aqua Splendor, I miss your videos. I hope all is well and we see some new videos soon.
@yellowstoneaquatics8377 2 жыл бұрын
This is sweet man. Love that you went through all the trials and showed the progress of the design. Amazing job definitely got my subscription.
@ISeaLive 2 жыл бұрын
Thank you. This was a fun project.
@danfinley4734 2 жыл бұрын
Thats super cool!
@briando7677 Жыл бұрын
Excellent work isealive! Always innovative with your execution!
@ISeaLive Жыл бұрын
Thank you bud 👍🏻
@lux-spiritus 2 жыл бұрын
Loving this. As a owner of a fluval 13.5 I have been looking everywhere for one of these with no luck. I will definitely be getting one very soon.😀
@ISeaLive 2 жыл бұрын
Solid, thank you David 👍🏻
@vTango888 2 жыл бұрын
I've been debating doing the same thing on my red sea max nano 20 gal. This def gives some inspiration... awesome work!
@jackcohen7617 2 жыл бұрын
I'll line up to buy one if its ever made!
@Reefeasy Жыл бұрын
I think someone needs to give fluval a call great product. Keep up the good work 👏
@ISeaLive Жыл бұрын
Thank you 👍🏻
@MoeReefs 2 жыл бұрын
Excellent work! I can see a lot of time and thought went into that. I know getting tolerances and structural integrity just right is harder than it looks. Throw in moving parts and the challenge is multiplied. Bravo!
@ISeaLive 2 жыл бұрын
Thank you 👍🏻
@kurtislyons8366 Жыл бұрын
Got mine ordered and should be here in a few days, can’t wait!!
@ISeaLive Жыл бұрын
I am finishing up another batch today that will be going out tomorrow. 👍🏻
@montheralomari5529 2 жыл бұрын
Amazing, waiting for the upgrades on this project for autimation and preventing smell 😁
@ISeaLive 2 жыл бұрын
💯
@alarsen18 2 жыл бұрын
Awesome man, saw your post on Reddit and am very impressed. Great job!
@ISeaLive 2 жыл бұрын
Thank you 👍🏻
@erikkop 2 жыл бұрын
What a great idea and design. 👍
@ISeaLive 2 жыл бұрын
Thank you 👍🏻
@connorfood Жыл бұрын
This is such a great idea, and keeping it simple with the hand crank instead of fussing with sensors and motors really works well for the small desktop aquariums! I'd love to have one on my IM Fusion 25 Lagoon tank! All the IM Fusion desktop tanks share the same filter chamber dimensions so it would be super simple to have one that fits them all! Eagerly awaiting the IM drop!
@discol76 2 жыл бұрын
Great innovation and design process. Well done👏
@ISeaLive 2 жыл бұрын
Thank you 👍🏻
@jamiequernsify 2 жыл бұрын
Excellent work 👏, can't wait to see a max nano version
@ISeaLive 2 жыл бұрын
Thank you. It will be coming soon.
@captainbc52 2 жыл бұрын
Made the purchase the other day and eagerly awaiting it! Will come back for a update once it's running!
@ISeaLive 2 жыл бұрын
Awesome, thank you Brandon. I’m finishing up the first batch that will go out next week.
@captainbc52 2 жыл бұрын
@@ISeaLive just curious...What size roller mat do I need... And does it come with one? I'm going to go ahead and order a roll of paper if I need to beforehand. I shot you an email a couple days ago but never got a response.
@MrClassy1991 2 жыл бұрын
This! This is why this hobby is nice!. Its the community 🙏 thank you dude what an awesome job 👏 👍
@MrClassy1991 2 жыл бұрын
£82 😔 😟
@ISeaLive 2 жыл бұрын
💯
@yurizinenko7189 2 жыл бұрын
Very cool!!! Well done and thank you
@stanproctor4238 2 жыл бұрын
Looks fantastic idea, well done on a really enjoyable video. Might be interested in 1 in the future.
@ISeaLive 2 жыл бұрын
Thank you. Let me know what tank you have and I’ll toss it on the list.
@Qwiv 2 жыл бұрын
Awesome!
@MikiCab1 9 ай бұрын
Nice. I am looking at designing one also. Very nice and simple design. Gave me some ideas.
@nickoconnor1094 2 жыл бұрын
This is the best nano product I have seen since vortech released the MP series....Just dead simple, elegant simplicity.
@ISeaLive 2 жыл бұрын
Thank you Nick 👍🏻
@thetipsycookery8268 2 жыл бұрын
Super cool!!
@rickymcnugget4635 2 жыл бұрын
This is amazing. I would love one of these for a waterbox 20. Can’t wait to see what else you make. You got yourself a new subscriber
@ISeaLive 2 жыл бұрын
Does the WB 20 and pen mini 15g have the same size overflow chamber ?
@rickymcnugget4635 2 жыл бұрын
@@ISeaLive the mini 15 is 3.1"×3.1"×13.8" and the wb 20 is 3.1"×3.1"×15.7". So it’s just a bit taller.
@ISeaLive 2 жыл бұрын
@@rickymcnugget4635 taller shouldn’t matter. I already made one for the WB Pen mini 15. It’s going to be in an upcoming video but I’m currently testing it. Sounds like it should just drop right in.
@Red10152 2 жыл бұрын
@@ISeaLive Good ill be waiting with the money hahaha
@Harolddespui 2 жыл бұрын
@@ISeaLive WB Cube 10 and the MP15 have the same size overflow.
@joeydrifts511 Жыл бұрын
absolutely love mine had it for 2 weeks and its awesome. will be recommending it to anyone wit and evo
@ISeaLive Жыл бұрын
Awesome, Thank you Joey
@leem270 Жыл бұрын
Brilliant Video
@ISeaLive Жыл бұрын
Thank you 👍🏻
@shawnburge4978 2 жыл бұрын
Nice dedication bro
@ISeaLive 2 жыл бұрын
👍🏻
@geoffW1997 4 ай бұрын
Great video. I am currently designing a similar filtering mat system and have been struggling to figure out where the mat should pass through. After seeing your design, I got some inspiration. Thanks.
@ISeaLive 4 ай бұрын
Awesome, send some pictures when you are done.
@OmgItzPoof 2 жыл бұрын
I am surprised major company's haver not came to you trying to buy this. I'll be buying 2 for both my 13.5's and great video sir!
@ISeaLive 2 жыл бұрын
Awesome , thank you?
@reefphotographyig5225 2 жыл бұрын
very nice video man, nice idea
@ISeaLive 2 жыл бұрын
Thank you 👍🏻
@SyphriX 2 жыл бұрын
I don’t do saltwater, but I watched this entire video. Fascinating process.
@ISeaLive 2 жыл бұрын
Once you go salt you don’t go back. Come to the dark side 🫣
@chip3428 10 ай бұрын
I love this, just sent you an email about getting the files. Can't wait to print and try this out.
@ISeaLive 10 ай бұрын
Hey, I’ll get back to you soon.
@chip3428 10 ай бұрын
@@ISeaLive I can't wait:D
@avankleef 2 жыл бұрын
Nice piece of engineering. Good job!
@ISeaLive 2 жыл бұрын
Thank you 👍🏻
@zachc6762 2 жыл бұрын
Nicely done, I think I saw your Reddit post on this the other day
@ISeaLive 2 жыл бұрын
Thank you 👍🏻
@randomreefer 2 жыл бұрын
Hey man I really appreciate your efforts man. This is dope!!!!
@ISeaLive 2 жыл бұрын
Thank you. This seem to be the first project I’ve done that reefers are liking.
@HCBCHEMISTRY 2 жыл бұрын
Good job man
@ISeaLive 2 жыл бұрын
Thank you
@josueherrera5440 2 жыл бұрын
This is awesome. Can’t wait until you start with the innovative marine tanks! I have a 30L
@AJBAdventures 2 жыл бұрын
Fantastic job, nice and simple and seems to work a treat 👍
@ISeaLive 2 жыл бұрын
Thank you. I start everything off to complex and eventually it gets simplified down after not working lol .
@AJBAdventures 2 жыл бұрын
@@ISeaLive fair play bud Be cool if something similar was available over here in the UK
@ISeaLive 2 жыл бұрын
@@AJBAdventures no problem, we ship to the UK all the time.
@AJBAdventures 2 жыл бұрын
@@ISeaLive AHH interesting, I wonder what one of your fleece rolls will retail for?
@ISeaLive 2 жыл бұрын
@@AJBAdventures I haven’t really wholesaled anything before and unfortunately everything is expensive because it’s low volume and hand made at the moment. I’m sure the price will go down if ppl start purchasing these.
@ReefingwithO 2 жыл бұрын
The innovative marine lagoon tanks need this- they are popular and a potential big market
@ISeaLive 2 жыл бұрын
I’m going to have a ton of IM tanks after this lol 😂
@samuelcontreras9248 Жыл бұрын
freaking amazing!
@Layheeee Жыл бұрын
Wait until you get your hands on it! It just keeps getting better!
@Angel_Monserrate413 10 ай бұрын
I sent you a message a few days ago in hopes to get the file. This is awesome
@ISeaLive 10 ай бұрын
Thanks, I'll check it out
@Angel_Monserrate413 10 ай бұрын
@@ISeaLivethank you. I really appreciate it. I requested several files so anything you can provide would be great. Thank you so much
@chip3428 8 ай бұрын
Did you ever hear back from him with the files? @@Angel_Monserrate413
@quransunnah96 2 жыл бұрын
woow amazing idea
@DannyKam4 2 жыл бұрын
I've been working on one myself. awesome video.
@DannyKam4 2 жыл бұрын
i will add...i have a nuvo 25 lagoon.
@ISeaLive 2 жыл бұрын
@@DannyKam4 💯 added. I need to get a fish room for all these tank requests.
@tehpunisher4568 2 жыл бұрын
Got yourself a sub bro this is ingenious. I honestly wish I had a 3d printer or a Lazer cutter but I don't ahhaa
@ISeaLive 2 жыл бұрын
Dude you gotta get yourself a 3d printer asap. Best purchase you will ever make but you have to use it and stick with it. Otherwise it will just collect dust on a shelf somewhere. A laser isn’t really necessary tho.
@bwclownfish 2 жыл бұрын
Sweet!
@CPHPHOTOGRAPHY 2 жыл бұрын
Waterbox 25g peninsula! I'd buy one. Nice work mate.
@ISeaLive 2 жыл бұрын
Hold tight it’s coming soon.
@leeandmandybattersby5958 2 жыл бұрын
love the idea of having one of these will have to get one when money isnt to tight 👍🏻
@ISeaLive 2 жыл бұрын
Hopefully I can make them cheaper in the near future as I get better at making them .
@ChristianKoch1985 Жыл бұрын
Brilliant Product! Well done! I would really like to get one of those for the Red Sea Max Nano Peninsula… that would be awesome 👏
@ISeaLive Жыл бұрын
Thank you. The Red Sea max is a tough one. It has a built in filter sock section so I would have to get creative.
@brentonk2491 2 жыл бұрын
Waterbox peninsula mini 25! Would buy one as soon as you have one! Very smart man!
@ISeaLive 2 жыл бұрын
It’s coming very soon 👍🏻
@23streetsoldier 2 жыл бұрын
Meaning get ready to get payed lol. Good work man. Interesting.
@ISeaLive 2 жыл бұрын
Haha thanks 👍🏻
@easthama Жыл бұрын
Thanks!
@leeboswell8483 2 жыл бұрын
I’m with it. You got a sub from me. 🤙🏻
@ISeaLive 2 жыл бұрын
Thank you 👍🏻
@captainbc52 2 жыл бұрын
Just purchased! Bought my 13.5 about a month ago and I've been dying for something different in the first filter media section. This roller is going to make a world of difference....
@ISeaLive 2 жыл бұрын
Awesome, thank you Brandon 👍🏻
@leerogers5628 Жыл бұрын
Can I just ask 6 months on how you have got on with it…I’m very tempted
@captainbc52 Жыл бұрын
@@leerogers5628 took it out after about 2 months. Didn't even make it through the first roll. The problem I was having was it was doing such a good job filtering It was backing up my water and my automatic top off was getting close to overflowing my tank if I wasn't careful and I was having to roll it maybe twice a day. It was great but if it had an automatic timer on the roller so you didn't have to manually do it every 10 to 12 hours it would be really good. I ended up just going with the InTanke media baskets and chamber one and chamber 2.... Filter sponge, filter floss, rock media in the first one and I changed the second column into a refugium.... With that combo my tank is crystal clear and has constantly zero nitrates.
@leerogers5628 Жыл бұрын
Many thanks. Funnily enough I’ve just had an ATO overflow using a skimmer and media basket in 2 for same reason. I’m switching to MB in 1 and refugium as well in 2. Thanks for taking the time 👍🏻
@captainbc52 Жыл бұрын
@@leerogers5628 If you need any suggestions. What I did was change the middle basket to a refugium but I took the stock light off of the fluval 13.5 and stood it up on its end against the glass in chamber 2. Makes a great little refugium light...lol. I took the lid off immediately and replaced with a better light source because my corals didn't like the stock light at all. Great little tank! The other thing I did was upgrade the pump to a SICCE silent 1.0 to get more flow. The inTank media baskets and the upgraded pump were the best things I did to my tank. Good luck!
@syahrildesign9707 2 жыл бұрын
wow, this is a new technology? 🔥 system work like RDF
@ISeaLive 2 жыл бұрын
It’s not new tech it’s just never been shrunken down and put into a nano reef tank.
@Seanmmvi 2 жыл бұрын
amazing! Outstanding. I freaking love it. You could rig up a small geared motor with high torque and low rpm to run on a timer like once every 4 days for 30 seconds to advance the roller automatically.
@ISeaLive 2 жыл бұрын
💯 that’s a future upgrade for sure.
@TheHavnmonkey 2 жыл бұрын
My favorite part of this video is when you laser cut the acrylic parts.... IMO too many people seem to just rely on 3d printing for their final production. Thank you for the design and video. If I ever get back into saltwater aquariums it will probably be a 10-20g nano AIO.
@ISeaLive 2 жыл бұрын
💯 it takes several days of 3d printed to make this but it can be laser cut in under 3 minutes.
@ReefDork 2 жыл бұрын
Cool piece of kit - I'd be interested to see how this goes long term 👍
@ISeaLive 2 жыл бұрын
I’ve had it on the tank a few months now and it’s doing great. Prior to the roller mat the filter pad on my media basket would get clogged every 4-5 days of it wasn’t cleaned. It’s was super annoying because of how messy it was. Just the convenience has been a game changer.
@roberthicks2364 2 жыл бұрын
That looks awesome. When you get around to doing one for the IM 50 Lagoon, I'll get one for sure.
@ISeaLive 2 жыл бұрын
Doesn’t the IM 50 lagoon have an overflow for a sump ?
@annoorkhan4219 2 жыл бұрын
Nice ... Sure..I also design a roller filer.Now I am working on electronics so that we can monitor it form internet..
@gunnarjanak4464 2 жыл бұрын
Incredible, I’ll get one for the WB Cube 20 as soon as they become available!
@ISeaLive 2 жыл бұрын
Do you know if the first chamber on the 20 cube is the same as the pen 15 or 25g
@ISeaLive 2 жыл бұрын
Do you know if they overflow chamber is the same as the WB pen 15g or 25g ?
@gunnarjanak4464 2 жыл бұрын
@@ISeaLive per the specs for overflow chamber on the Waterbox website the 20 and 25 have the exact same dimensions while the 15 is the same except for the height. 3.1x3.1x13.8 for the 15 and 3.1x3.1x15.7 for the other two.
@ISeaLive 2 жыл бұрын
@@gunnarjanak4464 well this is good. I am posting a video next week on the WB pen 15g roller mat. Sound like it will work for all the WB nano tanks.
@gunnarjanak4464 2 жыл бұрын
@@ISeaLive I’ll be looking forward to it.
@rockpoolreefer1031 2 жыл бұрын
Very impressed, I’d be pitching these to fluval or patent and sell them yourself, you would make a fortune!
@ISeaLive 2 жыл бұрын
Thank you. It would be nice to chat with Fluval .
@TheBlackMurder01 2 жыл бұрын
+1 for the IM tanks, I have a nuvo 10 and would love one of these. I’m pretty sure all the nanos by IM have the same size back chamber as well.
@ISeaLive 2 жыл бұрын
That would be great if they do. I'll probably start with these after I finish the Waterbox roller mats.
@TheBlackMurder01 2 жыл бұрын
Awesome! Yeah double checked and the 10g up to the 25g all have a 2.8”x2.8”x10.8” chamber
@christopherm.7310 2 жыл бұрын
Holy crap dude this is amazing. Sign me up for one if you decide to start selling them.
@ISeaLive 2 жыл бұрын
Hey thank you. Check the link in the description. I am selling a small run of the roller mats to start.
@trevorolsen6574 2 жыл бұрын
I have been waiting for something like this. Sadly its not for my tank. I will 100% purchase one of these for a jbj45 and a IM 10
@alexwlawson 2 жыл бұрын
Good work on the design and function!! 20 seconds into the video and I was wanting one for my Aquatop Recife 24g cube. Hopefully in time you have bandwidth to spread out to other tanks.
@ISeaLive 2 жыл бұрын
All be doing other tanks for sure but damn there are a lot of tanks.
@alexwlawson 2 жыл бұрын
@@ISeaLive well keep me in mind for any future developments! I will say though, chamber #1 is about a 3in square which might make things difficult.
@ISeaLive 2 жыл бұрын
@@alexwlawson any size is possible.
@frankpotter6056 2 жыл бұрын
I would buy this instantly if you had one for a 24g aquatop!!! Have been wanting something like this since I got it! Also got a subscriber from me just for the details you gave in the video definitely a thumbs up video!!!
@ISeaLive 2 жыл бұрын
Awesome, thank you. I need access to an Aquatop to test out the design.
@hankstein6984 Жыл бұрын
@@ISeaLive I have a aquatop 24 and can test out any design!
@CatFinder3000 Жыл бұрын
Sick
@aet0004 2 жыл бұрын
IM 50 Lagoon Please! Awesome work and Subbed
@ISeaLive 2 жыл бұрын
Thank you. Coming soon 😉
@jonathangunnells2822 2 жыл бұрын
Awesome stuff! Let me know when you nail the waterbox 10 gallon and I'll buy!
@ISeaLive 2 жыл бұрын
Waterbox roller mat will be available for preorder next week.
@jonathangunnells2822 2 жыл бұрын
@@ISeaLive On your website? And will there be a link?
@austingrozier1520 2 жыл бұрын
I'll definitely get one if you do a biocube mat!
@deniztonkus134 2 жыл бұрын
nice work! waterbox 20 cube would be great!
@ISeaLive 2 жыл бұрын
It’s almost ready 👍🏻
@lukeizydorczak7239 2 жыл бұрын
That’s amazing patent that sh.
@sarlife 2 жыл бұрын
New sub. I'd love one.
@Ellery-USA 2 жыл бұрын
Great job, was thinking of designing one myself. But as you've shown its alot of iterations and testing to fine tune I haven't had time for yet and getting a source for the smaller fleece rolls hasn't been easy other than converting an existing fleece as you did.
@ISeaLive 2 жыл бұрын
Yeah, it’s odd how hard it is to find the fleece rolls
@DrBlazer50 2 жыл бұрын
That's phenomenal. I need two for a Nuvo Fusion 20
@ISeaLive 2 жыл бұрын
Solid, I’ll add it to the list.
@DrBlazer50 2 жыл бұрын
@@ISeaLive thank you
@creeksclash19 2 жыл бұрын
Water box mini series peninsula 15 and 25 along with the small cubes (10 gallon) and bio cube 29 and 32 those would be a great start for the AIO roller mat!
@ISeaLive 2 жыл бұрын
💯, I already started on the Waterbox Series. I am testing a unit on the Peninsula mini 15g right now. I wonder if any of these tanks have the same size overflow chamber. Maybe the 10g cube is the same and the pen 15g ?
@RoelGarcia24 2 жыл бұрын
Agreed! Waterbox 25 would definitely buy
@JoeBurner1720 2 жыл бұрын
@@ISeaLive Will be waiting for the water box 20 video
@LordNecron 2 жыл бұрын
@@ISeaLive I wrote the measurements in my own post a bit above. Pen15 and Cube10 have same height, so have Cube20 and PM25 (but you can probably get away with a version for the PM15/Cube10) and all WB Nanos (Cubes and PM both sizes) have the same size for their sock chamber otherwise.
@aquarium.doctor 2 жыл бұрын
I would definetly buy one of these badboys from you for my WB 25 Peninsula Mini. Regardless of how much the shipping costs to Germany may be this is a must have for me!!
@gabe5476 2 жыл бұрын
I would definitely like one for my water box 15 mini peninsula!
@ISeaLive 2 жыл бұрын
Ive already made the Waterbox pen Mini 15g roller mat. Ill have a video about it next week. Stay tubed
@gabe5476 2 жыл бұрын
@@ISeaLive awesome will it be in the store next week?
@gabe5476 2 жыл бұрын
Patiently waiting I’ve been checking every day lol
@manuelescamilla7610 2 жыл бұрын
Yooo! This is 🔥🔥🔥 take my my $$$
@ISeaLive 2 жыл бұрын
Lol thanks 😂
@Amybolton22 Жыл бұрын
Would love one for water pen 25! :) looks so good
@ISeaLive Жыл бұрын
It’s almost here 👍🏻
@SteveEboy71 2 жыл бұрын
This is a must have i need it now. Well done that man amazing work. Any chance to get one in the uk ?
@ISeaLive 2 жыл бұрын
💯i send stuff to the UK all the time. I think it’s only an extra $10 to ship.
@nathanketchum1696 2 жыл бұрын
Would go great with my water box 15. Great work!
@ISeaLive 2 жыл бұрын
Did you watch till the end ? I already have one for the WB pen 15g that I am testing.
@LordNecron 2 жыл бұрын
This looks sweet! And I think it might not be too hard to make a version that fits in the Waterbox Cube 10/20 or Peninsula Mini 15/25. They have a 'Sock Chamber' for a filter sock, which is 80 x 80 mm (3.1" x 3.1"), across all of those 4 tank models. Height in the smaller version of both Cube and Peninsula is 350 mm / 13.8" in full height.
@ISeaLive 2 жыл бұрын
💯 i am testing out this model right now. The video is coming this week.
@Logical__Living 2 жыл бұрын
To help roll the fleece onto the new roller you could add a spot on the correct roller where you could insert a torx bit or any bit of your liking so you could use a drill instead of spending 10 min rolling by hand. Love the design if you could make one for a water box peninsula mini 25 id but one!!!
@ISeaLive 2 жыл бұрын
Haha yeah I thought about that. It’s a way better idea. The WB nano tanks are next.
@leongorani5121 Жыл бұрын
So sick! I’ve been planning on getting that fluval 13 or the smaller waterbox tank, if I do I will definitely get this! Less maintenance for me & everyone else 😂 but my question was what brand of roller mat did you use and cut for these? Would be cool if you also sold those cut and ready 😂
@ISeaLive Жыл бұрын
I've been using several different brands for the roller mat fleece. I do sell the cut to side refill rolls as well. I am in the process of getting a full custom order shipping out soon.
@thefathiker3844 2 жыл бұрын
I would love one of these for the fluval flex 15 and bio cube 16
@ewanjohnston6713 2 жыл бұрын
nice to see that someone's actually thinking about the Nano tank community. i wish these were in the UK and you got yourself a new subscriber.
@ISeaLive 2 жыл бұрын
Thank you. I’ll I have is nano tanks. I guess I am not into the larger systems.
@PazLeBon 2 жыл бұрын
@@ISeaLive doyou keep you rdog in a kennel?
@ISeaLive 2 жыл бұрын
@@PazLeBon no I didn’t kennel train my dogs but I’m considering it.
@PazLeBon 2 жыл бұрын
@@ISeaLive why am i not surprised :)
@kpshc707 2 жыл бұрын
I would pay a lot of $$$ for one of these that fit the waterbox cube 20 AIO especially if it incorporated a little 12v gear motor to wind up the felt. Great job on this idea I will be following with the hopes that you will design one for my tank.
@ISeaLive 2 жыл бұрын
Thank you, I’ll be releasing the Waterbox AIO version soon. I’ve been testing it for weeks.
@vivid.creative.aquatics 2 жыл бұрын
Well done! That looks super cool. Are you possibly planning a version that will fit a Fluval Spec-V 5-gallon tank? It would be super tiny, but very useful in that size tank.
@ISeaLive 2 жыл бұрын
Thank you. I actually just ordered that tank. It will be really cool to pack a roller mat into the back of it. It’s going to be one small roller mat lol
@vivid.creative.aquatics 2 жыл бұрын
@@ISeaLive if done right i think you could make one size that could work in a number of similar sized tank - include the FLuval Spec-V, LifeGard Aquatics nanos, and possible the and Waterbox Cube mini series
@ginofronti9467 Жыл бұрын
@@ISeaLive I would take one of these too Im planning on using the fluval 5 for a qt tank
@amy 2 жыл бұрын
Would LOVE one of these for mine! I’m using my evo as a frag tank
@ISeaLive 2 жыл бұрын
That’s a solid use of an EVO . I’ll be making a frag tank soon.
@amy 2 жыл бұрын
@@ISeaLive the goal with mine is to make it a fishless system so people don’t have to worry about parasites when they buy frags :)
@riomadoro72 Жыл бұрын
For a Red Sea Nano Max...youre are insane.
@ISeaLive Жыл бұрын
💯 it’s on its way soon.
@dissumshit 2 жыл бұрын
This is soo dope. I was wondering would you make up for my tank?
@ISeaLive 2 жыл бұрын
What’s your tank ?
@dissumshit 2 жыл бұрын
@@ISeaLive I just email you. I have the cobalt c-vue 18
@ginofronti9467 Жыл бұрын
Love Love Love this - can we get them for a Eshopps deskmate, this is the hottest pico tank right now
@ISeaLive Жыл бұрын
I checked it out and noticed the filter sock bracket is permanently installed. I would have to come up with something for the filter sock.
@ginofronti9467 Жыл бұрын
@@ISeaLive yes thats true I bought the media basket and it slides in under the permanent piece - so yours would have to drop in the center channel and slide left to lock into the sock area, in fact if planned correctly there can still be a media cup and your mat. Im glad to send you picks and links
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 8 МЛН
BalcevMMA_BOXING
Рет қаралды 4,6 МЛН
Hobbyist Fishkeeper
Рет қаралды 52 М.
ISeaLive
Рет қаралды 943