First Start up and Test Drive with Turbo C10
Рет қаралды 17,575
2 жыл бұрынafter long nights and barely fitting our tight deadline, we fired the truck up at 4:30 am without much luck of it running well. we decided to tackle the issue the next day and we discovered a few fueling issues and finally got it to fire up and run. we let it get up to temperature and finally took it for a test drive!!! more fun videos to come!!
@parker123ism 2 жыл бұрын
Love it!!!!
@andimbackonmygrind Жыл бұрын
Love it!
@yaddi3434 Жыл бұрын
Sick!
@Ratford63 2 жыл бұрын
Canton in da house
@jamestmaluchi 2 жыл бұрын
Hey Bud...can you please tell me what you had to do to keep the a/c with the turbo setup. What manifolds? What engine mounts?etc. What problems if any did you run into? Your video is the only example I have found of a turbo c10 with a/c. Thanks, Jamie
@hotrodhomestead 2 жыл бұрын
I currently don’t have the compressor on it, but at the location, you could run a low mount compressor and it would be tight but can clear. I am running the trick t4 manifold and an eBay high flow manifold for drivers side. Then just linked them. I’m running the Muscle rods mounts but really, ict and Holley and lots of others make mounts for these trucks now. I’m happy to answer any questions you may have!
@CampFredo 11 ай бұрын
any information on the intercooler setup? I have same grill and was looking at installing intercooler just don't know how much I would have to modify. Do you have a part number to the intercooler you purchased?
@joshmerritt9033 Жыл бұрын
I love the wheels where did you get them im working on my 81 short wheelbase c10
@hotrodhomestead Жыл бұрын
They’re wheel vintiques. I got them from summit racing.
@ismaeliniguez13 Жыл бұрын
Sweet truck mines is similar but i have a white roof any ways lol Have you done any work on the differential?
@hotrodhomestead Жыл бұрын
I appreciate it! Yes it’s a Currie 9” Rearend
@DesireGod4ever Жыл бұрын
So how did the tsp chop monster cam do on boost? Need some input if you don’t mind before I buy the cam
@hotrodhomestead Жыл бұрын
It did fair. I don’t believe it was the best choice for the application, but it ran and drive great. Sounded insane too. But as far as the turbo stuff goes, I’m currently running the SS2 boost cam and it’s legit
@theronpeterson1748 2 жыл бұрын
HotDamn!!!
@jimmycline4778 Жыл бұрын
Can’t you order some 12inch wide steel rear wheels and put hub caps back on? It would look menacing with wide steel rear wheels, I’ve seen them!
@hotrodhomestead Жыл бұрын
I run 10s on my radials. 12s look good but with a bubble tire, it rubs the inner fender and outer quarter when you drive the way I drive.
@vernonchaney65 Жыл бұрын
Tell me about your fuel setup? In line or in tank looking to do a turbo setup in my 74 c10
@hotrodhomestead Жыл бұрын
It’s got twin 525 pumps in the tank
@vernonchaney65 Жыл бұрын
@Hot Rod Homestead twin 525!? Are you using stock fuel sending unit or a make shift unit?
@hotrodhomestead Жыл бұрын
@@vernonchaney65 one 525 is hung on factory sending unit, the other, I drilled and installed a grommet and dangled it into slosh section of tank.
@srichampootv 2 жыл бұрын
Good lord what cam is that👀
@hotrodhomestead 2 жыл бұрын
It’s the Texas speed 6.0L BFD cam. It sounds radical lol
@russ2759 Жыл бұрын
What motor mounts
@hotrodhomestead Жыл бұрын
They are “muscle rods” mounts. Extremely well built.
@russ2759 Жыл бұрын
@@hotrodhomestead can you send me a link please. I plan on putting a cast manifold on mine and I have slider mounts but I don’t have enough height
Gufee.medalin
Рет қаралды 10 МЛН
TCI Engineering
Рет қаралды 48 М.
Texas Street Scene
Рет қаралды 611 М.