Fishing Tips - How to Crimp

Рет қаралды 197,468

11 жыл бұрын

WEBSITE: blacktiphfishing.org
This is a fishing tutorial video that shows how to crimp both cable and monofilament. Crimping is a required knowledge in order to learn how to create big game fishing rigs and leaders. Always use copper crimping sleeves for cable and aluminum crimping sleeves for monofilament. Whether your deep sea fishing for marlin offshore on a boat or shark fishing from the beach, you will need to know how to properly crimp, so that you can create strong rigs that are able to withstand the power of these fish.
TOOLS:
- Wire Cutters
- Hand Swager AKA Crimper tool
MATERIALS:
- Crane Swivel
- 2.3mm Stainless Steel Thimbles
- 2.3mm Oval Aluminum Crimps
- 1.9mm Double Barrel Copper Crimps
- 480lb 49-strand cable
- 500lb monofilament
SPONSORS:
barrettrods.com/
CREDITS:
This video was filmed by Chad Crawford from howtodoflorida.com/
**********************************************************************
RELATED VIDEOS:
How to Make a Shark Rig for Surf Fishing:
• Shark Fishing Tips - H...
How to Make a Double Hook Shark Rig:
• Shark Fishing Tips - H...
How to Do Florida - Shark Fishing Episode:
• How to Do Florida - Sh...

Пікірлер: 129

@bosesebi6685 Жыл бұрын

Nice video. Everything is actually shown properly in terms of light, visibility of process, and all the important details are mentioned.

@braxtonmiller79 7 жыл бұрын

Danke für das tolle Video, das es mir wirklich hilft, zu versuchen, zu lernen, wie man meine Angelschnüre zusammen kratzt

@gacastillo21 4 жыл бұрын

Great video! Really helps me out in starting to make my own leaders. Keep it up!

@brian1978503 9 жыл бұрын

Never thought I needed to use thimbles until last night. I hooked up on 3 sharks and third pulled the swivel through the 400lb mono. I'm a believer now! Haha

@808Mark 8 жыл бұрын

Thank you so much! EXCELLENT job explaining the proper technique!

@luisnistal 7 жыл бұрын

Great video. I learn to make my leaders from this video. Just one tip for beginners: Don't go cheap with the crimper tool, any crimper tool under $100 most likely you will lose the big fish like I do many times. Better crimper = better results.

@FrancisSims 6 жыл бұрын

Excellent stuff! I've been looking and looking for a video that explained this process, and yours is the best one.

@InfinityFishingTeam 11 жыл бұрын

Awesome Tutorial!

@jchase4657 4 жыл бұрын

Watching this in 2020 and I just couldn’t notice black tip used to stuu stuu stuttterrrr... in his videos amazing how much he’s changed haha great vid man

@IxBullseyexI Жыл бұрын

Very well explained. Just an excellent video.

@tariqsiddique7791 3 жыл бұрын

Fantastic bro, thats great explanation , hope I learned how to crimp properly.

@makenziepickering8280 5 жыл бұрын

Thanks for the tips and demo definetely will be put to use.

@youtube1987pl 3 жыл бұрын

really good material!

@BarrettRods 11 жыл бұрын

sweet video!! looks good!

@mb1108 6 жыл бұрын

thanks for the video, why cant you use copper sleeve on mono ? thank you

@ProFishermanJones 11 жыл бұрын

Awesome video very informative

@rodneygardner6804 6 жыл бұрын

Hey Bud where did you order that crimping tool from it is awesome.

@BlackWarriorLures 7 жыл бұрын

Solid information. I've always been scared of crimping because I thought I'd damage the line.

@StingRayNet 7 жыл бұрын

Great Video. Thanks!

@chriswilke 5 жыл бұрын

Thanks for the tip man. I have been doing it wrong for awhile

@charlieneilson1239 3 жыл бұрын

great vid

@JavierTeran81 8 жыл бұрын

hey can recomend any crimpers that can handle up to 2.3mm under $50, thanks

@0007homer Жыл бұрын

Great, I'm now ready to fish for perch at my local lake. Thanks!

@airborn84 11 жыл бұрын

nice video do more tutorials starting from what size of mono line and wire we need to crimp ?

@dak8840 6 жыл бұрын

Do you have to use certain crimpers depending on weather it's aluminum or copper crimp. I have p line heavy duty crimpers , but they have a needle like tip. Which on aluminum makes a sharp edge on a 50 lb crimp. What do you recommend?

@matrixx611 6 жыл бұрын

How do you know what size of sleeves to use? The same diameter as the line?

@Rman235 11 жыл бұрын

Also im going to ft lauderdale next month for 2 weeks planning to do some shark fishing, if youve ever been there how was the fishing? And also if i have a kayak and bring out the bait was sharks could i expect to catch ? Thanks

@SeanKearneyFILM 11 жыл бұрын

How do you feel about spring loop line protectors for mono filament in place of a thimble?

@fhpd350 11 жыл бұрын

Josh, You're using High Seas crimpers? Which position in the crimpers are you using for the 500 lb mono and sleeve? I don't have my crimpers on me currently but I know I crimped with the second position from the mouth of the crimpers

@Rman235 11 жыл бұрын

Hey is it necessary to have to use a crimper like in the video to properley crimp or can you use another tool such as pliers?

@ViktorAmosBelin Жыл бұрын

Thank you boss

@Rman235 11 жыл бұрын

how far do you have to bring out your bait in a kayak to get it near the big black tips and other sharks?

@fhpd350 11 жыл бұрын

Ok, I used the 3/64th space. I thought it looked a little too mashed. Should I recrimp in the 1/16th? Thanks for responding.

@GrumpyOldFart81 2 жыл бұрын

I know I’m late but what brand of hand swagger did you use? I need one that can do 1/32

@Atheos119 9 жыл бұрын

I've been wanting to get into Blacktip shark fishing off the coast of West Palm somewhere. Are there any special licenses I have to buy for florida coastal shark fishing? Thanks.

@JT3iii 2 жыл бұрын

Thank you for this!! Never tying another haywire twist again!! 😅😅

@fat_head_Carl 9 жыл бұрын

Awesome video...thank you. Can anyone suggest a starter kit for crimping?

@BlacktipH 9 жыл бұрын

You should be able to purchase a starter kit at Bass Pro.

@crownroyal2001 9 жыл бұрын

Great tutorial. Question what if your crimps are the shorter crimps that don't come out both sides of the crinper ? Thanks, Chuck

@BlacktipH 9 жыл бұрын

Chuck Rich Just crimp the entire sleeve.

@DerrickFishes 6 жыл бұрын

What brand and size thimbles are you using? I ordered some "small" size billfisher brand thimbles says for up to 200# but they are way too big even for my 250# fluoro

@aamershaikh6409 5 жыл бұрын

Hands down..the best DIY video on crimping. Thank you.

@Koi_Lawk 9 жыл бұрын

Thank you for breaking down crimping in your video. I fish sturgeon in California and interested in learning how to attach the hook to the leader. Current, I'm using 90 lbs 7 strand wire and 80 lbs fluorocarbon. My knots for the wire are failing would adding a crimp solve this for me? If so, how and where should I add the crimp. Thanks again for the video.

@BlacktipH 9 жыл бұрын

Crimp the 7 strand, It will help. Tie the fluorocarbon.

@airborn84 11 жыл бұрын

Not all the videos but i asking this coz i don,t want to make especially for sharks i want to make for smaller size like barracuda and wahoo so i,m asking if i have mono 80 lb to 100lb and wire 80 lb to 100 lb should i crimp them or just tying the with swivels ?

@aroccop 11 жыл бұрын

instead of haywire twist.. can you just crimp the line to the hook and swivle.. using a crimper.. and possibly do the twists only after that? im having a very difficult time with the haywire twist.. stressing me out

@danehboi123 11 жыл бұрын

am i able to use my 1.5mm double copper crimps on my 1.5mm mono? why should i use copper on wire and aluminium on mono? thanks

@YL-mc9oz 7 жыл бұрын

VERY PROFESSIONAL - THANK'S !!!

@coyotecreekoutdoorsN 11 жыл бұрын

when im looking at crimpers it says 2.2 outside diametor so dose that mean i can not use 2.3 crimps

@tomateo8 11 жыл бұрын

what type of aluminum crimps do i need for 150lb mono and 200lb mono?

@PhilippeMarechal13620 4 жыл бұрын

Merci

@danehboi123 11 жыл бұрын

also it is hard to slide my 1.5mm monofilament and wire through the 1.5mm double crimps, i cant get it through. Do i need to get bigger crimps? if soo how much bigger? thanks

@troyminster838 6 жыл бұрын

why not burn the tag end of the mono as well?

@somesinger1575 6 жыл бұрын

I didn't fully understand the reasoning behind crimping just the middle, would it be possible to explain in further detail?

@ethereumplayer1729 Жыл бұрын

Hi. Can you tell me what Crimper that is so I can buy one.

@Archaryvalhir 11 жыл бұрын

Please do more tutorials :)

@greggcron2605 11 жыл бұрын

Hey josh. What happened to the 2012 and 2011 black tip challenge vids. All I saw were promos

@TheThepimp15 11 жыл бұрын

the crimper u use do u recomend that one or is any crimper ok ?

@christophervela5447 4 жыл бұрын

Even in 2012...you were a pro

@bbluewater 10 жыл бұрын

Great video! How do you know what slot to use?

@BlacktipH 10 жыл бұрын

By the size of the sleeve that you are using.

@necdeteren 3 жыл бұрын

Hello bro what is the brand of pliers?

@Jbay2608 8 жыл бұрын

Have you switched over from using this cable to using heavy single strand? I've found that you can get this 49 strand cable at hardware stores much much cheaper than cable in the fishing store. It's also stainless steel, and I like how the 49 Strand doesn't kink so you get more uses out of it. Currently I use 200lb carbon coated wire for sharks, but I'm thinking of going over to the 49 strand with crimps.

@BlacktipH 8 жыл бұрын

+Jbay2608 I prefer wire over cable. I have had sharks bite through cable. They only need to bite through one strand at a time and eventually the cable fails.

@jman3336 10 жыл бұрын

How do you feel about burning the end of the mono after you put it though the crimp so when you pull it through so you dont have to cut the mono does not pop out of the crimp???

@BlacktipH 10 жыл бұрын

If you crimp correctly, you will not have to worry about it slipping.

@jman3336 10 жыл бұрын

Thanks!!! How about loop protectors???

@joshuajorgensen9955 10 жыл бұрын

jman3336 They work.

@jman3336 10 жыл бұрын

Thanks!!!

@dawngage2836 5 жыл бұрын

On your amberjack video

@j.michaelphotography4883 9 ай бұрын

Thanks

@Chrisandjack666 10 жыл бұрын

BlacktipH what brand do you use for your crimps, thimbles, and your mono leaders?

@BlacktipH 10 жыл бұрын

LP mono, Pro Tackle crimps and thimbles. I purchase all of my supplies from Shark Outlet: sharkoutlet.com/

@user-lu3lx7pz6w 4 ай бұрын

What brand of crisper is it please

@bryce872 11 жыл бұрын

2 questions- 1.Do know a good website to buy cheap crimpersthey are pretty expensive? 2.How do you catch your shark bait?

@davidkarikas882 7 жыл бұрын

Where can we find the hand swager or crimp tool you used online? Any recommended sites?

@DanScarboro 6 жыл бұрын

Melton International Tackle

@TwP7109 11 жыл бұрын

What is back braiding the cable

@jacobkantor3886 7 жыл бұрын

can smashing it with a brick be a substitute for buying crimpers?

@icuki6171 6 жыл бұрын

Finally a good F** video!!!

@jameserickson1330 4 жыл бұрын

True about copper with wire leaders, but can also use copper with mono.

@FjFished 10 жыл бұрын

Hello! I have a 7-strand titanium leader thats aprox. 1mm dimension. What size of the double barrel copper sleeve do i need?

@BlacktipH 10 жыл бұрын

1mm sleeves should do the trick.

@johnm840 10 жыл бұрын

Other Technical reasons than the galvanic effect, for the Stainless to Aluminum. Left that out, in other comment. Can you talk about effect of over crimping Mono and under crimping. Looking to understand the sweet spot for maximum strength for Mono.

@PLP-DIY 7 ай бұрын

Good crimpers like his have the stops on each arm so you physically cannot squeeze any more. Buy crimpers like his.

@ajmiracle7299 9 жыл бұрын

This guy should be teaching this in college!!

@MrDavidelliottjr 3 жыл бұрын

Those pliers seem like over kill but what do I know. Lol. But he is right on everything

@AwesomeFishable 11 жыл бұрын

That's the thickest mono I've ever seen!

@TheThepimp15 11 жыл бұрын

y cant we use copper crimps for mono ?

@jpatz18 11 жыл бұрын

what brand crimper is that?

@OutdoorsFHS 9 жыл бұрын

Ok can I use braided line on the alluminum crimp or does it have to be mono

@joshuajorgensen9955 9 жыл бұрын

Outdoors FHS Don't crimp braid, just tie it.

@OutdoorsFHS 9 жыл бұрын

ok awesome do i just tie it to a swivle then

@BlacktipH 9 жыл бұрын

Outdoors FHS Yes

@trumpafarian7129 8 жыл бұрын

+Outdoors FHS For thin braid you want to tie it. For heavy braid you want hollowcore. Learn how to splice loops. You splice a segment of braid onto your leader via the Chinese finger trap method. Then you splice a loop in the other end of the braid. Splice a loop on your mainline. Connect the loops with a loop to loop connection, a cats paw. That is the strongest connection for braid when big game fishing.

@chomuma5868 10 жыл бұрын

Hey great video and tutorial! Just one question before I purchase thimbles! Should I keep aluminum thimbles away from cable just like the crimps or would that be alright?

@BlacktipH 10 жыл бұрын

Use stainless steel thimbles with cable.

@evl150 11 жыл бұрын

I respectfully argue that stainless steel and aluminum DO NOT react (corrode) one another. We use stainless steel bolts, washers, etc. whenever we are attaching hardware to our aluminum boats because of the fact that they do not react to one another.

@user-ew1xb4so9l 9 жыл бұрын

Where did u get the cable

@user-rd5nc1nb9f 9 жыл бұрын

kevin williams American wire or something like that *flies awway*

@neilfahey8380 10 жыл бұрын

can both crimps be used on nylon?

@BlacktipH 10 жыл бұрын

I would recommend tying nylon.

@kellymartin1938 9 жыл бұрын

Where can I buy that crimping tool and what model is ? Thanks

@BlacktipH 9 жыл бұрын

You should be able to order it from Shark Outlet. It's a Centro heavy duty hand swager.

@obxfishing1800 8 жыл бұрын

+BlacktipH Is the Centro CH-18 Heavy Duty Crimper and the Sea Striker CH-18 Deluxe Hand Crimper of equal quality? They look exactly the same?

@obxfishing1800 8 жыл бұрын

+BlacktipH Will the Centro CH-18 Heavy Duty Crimper be compatible with the Sea Striker/Billfisher crimps?

@TheThepimp15 11 жыл бұрын

thanks man just asking

@WCSC10 11 жыл бұрын

I accidentally forgot the thimble. If I was hell bent on getting the crimp off how would I go about doing that?

@wiffbob1484 4 жыл бұрын

WCSC10 you’d have to cut it and start over.

@nhdntp 10 жыл бұрын

Where can I get that crimp tool?

@BlacktipH 10 жыл бұрын

Shark Outlet: bit.ly/1kkKUAF

@nhdntp 10 жыл бұрын

Thx so much! I been looking everywhere

@dawngage2836 5 жыл бұрын

I thought you never u use cable for sharks

@XtremeAngler1000 11 жыл бұрын

Can you crimp hooks by just feeing the line through the sleeve, then the hook eye, then back through the other side of the sleeve and then crimping it? can you attach subleaders to a leader by just crimping the two together with a sleve? sorry but one more questions. Do you really need the thimbles i dont see how they work. Any help would greatly be appreciated!!!!

@dawngage2836 5 жыл бұрын

He said if u use cable for sharks they shred the cable

@GrownManGames 2 жыл бұрын

I wish u had a more in dept version of this going into the signifance of the thimble being needed and the type of material the sleeves are made out of in a more expansive way