I used these with the Team Catfish weight slides to make a kzfaq.infoUgkxdmsDj7fQXe77DC0l7P7ua8B3PiESUubM Carolina rig and they were perfect for the ponds I fish. I have also used them to make 3 way rigs and these work perfectly. Haven't had any issues with them snagging in rocks or in weeds yet.

If you smoke the mold with a candle 🕯the sinkers won't stick, just tap the open mold with something non marring and the sinkers will drop right out. Great video, I've watched them all.

Great idea. I don’t think the fish will care what they look like.

I already have a DIY mold.... it's called my neighbor. He makes lead weights for a living. 😃

Caught you a second time by accident, noticed the drag sinker video first and was pleasantly surprised it was you.Education with entertainment. Keep up the good work and thanks,PS went to the third video.

Bravo to you, sir for showin' your mistakes. That how a real Man does it.

If you think Race City is high go to some of the others they charge a minimum. You can't buy just a small piece of metal. Thanks Keith always great.

Wax makes a very nice lube for working with aluminum, either drilling or tapping holes and it is cleaner then liquid lubes.

TADAY! We get to see him lay some eggs! I mean make some eggs! I mean make some egg sinkers! Gave me a great idea for some snap on sinkers for walleye trolling! Thank you! Stay safe and healthy!

Very cool Keith

This is a smart channel for sure. Entertaining too, especially that lil green plug, he funny as heck!

John had your video playing before I knew it was up.

I like you a lot man...showing the that shit happens when it doesn't work out is priceless. the work that's involved to make a plan come together isn't pees and carets.

Your mold could have been heated more before pouring so your sinkers would not have so many wrinkles. This was a really great idea for making your own sinker mold. Thanks for the video!

Good Job ............ Two Thumbs Up. Tight Line

You could also grind a 1/2 inch drill bit to make a round finishing bit .

Now isn't that slick! Cool idea!

Excellent project….TKS

Very nice thank you for showing it on you tube have a good night 🙂

Very nice project sir👍

Them Sinkers looked Pretty Darn good .

Awesome video! 1st real comment.. 😆

I use race city for my welding business. If I get there early enough I like to stop at Stacey's for breakfast.

Now we ready!!!! 😂😂😂😂😂😂😂😂

Awesome!👍💥

Good one....

Numero uno Mr.Keith....superbravo

excellent thanks

As a retired guy I love your channel, great ideas that don’t break the bank. Keep it coming great stuff

Molds can't be that expensive to just buy! :)

Excellent as always.

Awesome 👏

Where I fish I need a little heavier sinkers. So i make mine by using a tea candle cup. My weights weigh between 5 & 6 oz.

Keith, try using alcohol when drilling aluminum. It keeps it cool while lubricating the drill bit. I really enjoy watching your videos.

Another cool video 👍🏻👊🏻

Awesome 👍 if you have all the gear and equipment already to make'em 😁

@12:54 A stainless steel ladle from the dollar store works well too. I've melted many a pound of lead in it and it's still good to go.

Great job. !!! Please tell your wife that I will be ordering a bunch more of the fish-n-stuff black tees. My twin boys wore them to school (6th grade). Now all their friends want one just like Keegan and Camden’s. I’m just say’n. Lol. Mike V.

AWESOME!!!!!!

Excellent as always

Not only is this video entertaining its also.......Awesome! I just pulled and old cast net out of creek some lazy dingus left behind. Not only did I clean their mess up,I got free sinkers! I thought that was pretty dang aw_ _ _ me( fill in the blank) 😅

I’m definitely going to make my own version of this. Thanks for the idea

I’d say that was awesome

Told ya I was on the way to watch it. Lol John

Another awesome video! Thanks Keith! I have been contemplating making my own muzzleloader/buckshot molds…i think you just pushed me over the edge to try it. Of course i will make an egg sinker mold as well!

Yep. This video is AWESOME. :) I stopped short of making my own custom molds for jig heads, because the mold "blanks" were just as expensive as the dang finished molds. Lol NOW? I just learned how to make unlimited mold blanks for super cheap, super fast. 👌 AND, it's gonna be the same/same for plastic bait molds! Sweet! Thank you!

Nice build. Gotta love them egg sinkers.

Keith, Another Awesome DIY...just Awesome. Did I mention it was Awesome?

Cool

Always great stuff.

This video is just what I needed for my next build. Thank you

Very nice job on that mold. Super cool!!

Super cool project!!

Awesome DIY VIDEO 👍👍. I make my line holes, the same diameter a plastic candy stick. Cut a length 3mm longer than the weight, push through the line hole. And mushroom them over, with a lighter. As it helps with the weight running, up & down, without chaffing your line. As that is how most, in-line Carp weight are especially in-line feeder weights. A small half Oz in-lines are awesome, when fishing for trout with doe-bait 🎣😃👍

yay lol I am beginning to warm to your style :)

keep them coming buddy ty for sharing

Excellent video your sinks look great big thanks nice videos I whach them whenever you up load good job 👍

Always good stuff Mr. Keith!

You can use two flute high speed end mills for aluminum. Wd-40 is the best thing I’ve used when cutting it. You could also use some sort of saw to put pry slots on the corners in case it sticks

nice job again. like watching you with all your diys. keep em coming. you the man

That was awesome! 💯 I haven’t laughed this hard for a minute. Keep them coming!

That's awesome

Great job. Thanks

Exactly what I needed....just as described!!

Freaking awesome dude

That was awesome as always love the hacks and the lures lol great stuff

Thank you that is the one I’ve been waiting on, you make it look easy lol

Allsome job Keith!

Thank you

Another AWESOME video Keith!!!

You could press them in using a "C" clamp with a large enough throat opening to press the stainless steel rod into the blocks. You may need to use a piece of hollow steel rod over the clamp handle to increase the leverage to turn the screw and press the rod intl the blocks.

Love it !!

Super video, thanks

G'day mate luv the PPE 😆 your a funny bloke nearly Choked on me beer 🤣 keep up the humour mate it makes your show stand out. No wonder real Aussies and real Yankees get on, we got the same humour 🍻

Keith I have use a few of your DIYs I really like the koosie one to keep my leader ,material in thanks for another great idea

Dig it! Well done!

Well jeez that looked EZ, now I’m sorry I bought an egg sinker mold last spring ! 🤔🤣

Really awesome video, I got to try this one!

I was going to do mine,when I get around to it,with a drill bit but I forgot about the end mill bits.....making a trip to the garage to dig some out now....lol Those pull pins,if you take a rag/towel and oil it they'll come out of the egg easier. Doesn't matter what oil you use,I just use one of the extra bottles of air tool oil I bought after misplacing 3 others....after 5-6 pours in a Do-it mold I'll run the pin across the towel with the oil. If you could wobble the bit just a hair before you finish boring the cavity it'll let it angle outwards towards the center and the eggs should pretty much just fall out when mold is pulled apart. Might be best to do when press is off and just twist the chuck by hand,shouldn't take much to angle it just a hair. Could also use the end mill bit in the press to make the mold as Do-it does.Will take a lil more time and patience though.

Thanks for the great video 👍👍👍🖐️

Hello from Portugal 🇵🇹. Good work

You had me rolling when you missed the pour.

I wish I would have seen this before buying 10lbs of egg sinkers to go to the coast. My bait constantly rolled across the bottom in the current. Lesson learned

I just use my old trusty round ball bullet mold. Got a few many years ago, and all it takes is to drill a hole in th middle after pouring

That was awesome 👏

I make the moulds for my cast net weights using bondo. There are several tutorials on yt on how to make them. And yes, the bondo can withstand the heat of molten lead just fine. Also, if you really want aluminum and dont have the tools and stuff, lee moulds (they sell moulds for casting bullets) can sell you a blank mould with locating pins and handles. All you do is some drilling and shaping your “pattern”.

Great 👍👍

Wow, makes me want to buy a drill press. I have the same hot pot for melting lead. It is perfect and easy to pour.

Awesome video

Vids have some really good idea's. In fact I have several in progress. Main reason I watch EVERY vid is this man his bird and his bait crack me up. And I like the music. Keep 'em comin'

Been away for a while but catchin’ back up! Love the sinker mold brother!!!👊🏻🇺🇸

Bought bunch of molds last trip to cabelas that was on sale so got as many as I could afford. Remember to heat your mold before pouring hot lead into. I also put a cake of bees wax in my melting lead never had problems with stinking...

Great video! 👍🏼

You can run a burning candle under the inside of your mold so that it coats it in soot. That way the lead doesn't stick. Also your mold is a bit cold, can see by the waves in the lead. Fantastic video! Made me want to go make some molds for myself now.

Make a large and a small set. Mix a large half with a small half, and you'll have a medium size, too...

Awesome!! You guys are lucky to have scrap yards that will sell you stuff like that. They wont do that around here.

Oh yeahhhh

Great instructional video.

considering I have 850LBS of lead in the back of my truck at the moment, I need to start makin' sinkers

coat the inside of the cavity with candle smoke to make it release more easily.