No video

FiTech Total Package | ScrapStang gets Fuel Injection!

  Рет қаралды 3,543

Rookie Pilot

Rookie Pilot

Күн бұрын

Special thanks to FiTech for sending this kit ! This will bring ScrapStang to a different level!
patreon.com/Ro...
ROOKIE MERCH: kmpaint.shop/c...
www.buymeacoff...
Some people have also asked if I have a wishlist, so here you go!
www.amazon.com...
Instagram: ​⁠@rookie__pilot
Rookiepilot66@gmail.com
Angel Robles
1501 S Cherrybell Strav
#27794
Tucson, AZ 85726

Пікірлер: 62
@rockercover
@rockercover 3 ай бұрын
Fuel today. (Vaporization / boiling point was affected). What a topic you mentioned. Recalling, (memory), when our state legislated unleaded fuel, along with octane levels. (When I noticed fuel delivery trouble). One industry changes, (gasoline producers, due to a gov. regulation - lead deletion, octane reduced), the automobile engineers did not change the fuel delivery systems (no retrofitting of existing engine parts), at least not right away). (Years later - early renditions of TB-FI on some passenger vehicle, GM engines)… Got mechanics scrambling for answers. Thanks for memory revisits with your builds. 👍👍👍
@kirktruman6707
@kirktruman6707 3 ай бұрын
Damn Angel I really like your excitement when it comes to car parts. 😮
@rookie__pilot
@rookie__pilot 3 ай бұрын
Thanks!
@wolfthornhawkridge5705
@wolfthornhawkridge5705 3 ай бұрын
I like the FiTech guys, very approachable and willing to chat with you.
@notimportant5205
@notimportant5205 3 ай бұрын
I'm sure your gonna get a lot of advice. I just installed FiTech Ultimate LS. 1. watch all of their videos for your model 2. don't rely on self learning. Go in and setup your timing and fuel curve on your own or you may wind up with a base line that is WAY too lean. 3. Pay close attention to how FiTech sends the initial burst of fuel when you turn the key on. I found it was too much gas once the engine was warm. Had I not watched their videos on tuning (others have posted valuable content too) I would have never achieved the success I have so far. Hope your throttle body woks as well as my rail system. So far I'm a fan of FiTech systems. Their tech support has been pretty good; but their videos provide way more insight. Good luck and I'll be rooting for you...
@rookie__pilot
@rookie__pilot 3 ай бұрын
Thanks for the tip! I agree that their videos are very informative! Will definitely be looking at them again and again
@Ride_Runner
@Ride_Runner 3 ай бұрын
This car is getting cooler by the video.
@rookie__pilot
@rookie__pilot 3 ай бұрын
😎😎
@DemonViewLLC
@DemonViewLLC 3 ай бұрын
Wait, did someone say potato's? Sorry, the Irish part of me got excited for a second. That hand held controller looks like a mini game station. Now I'm wondering if it could be ported.... (this is why I shouldn't be let near cars....).
@rookie__pilot
@rookie__pilot 3 ай бұрын
Ported 😂
@MoonMoon-rm2vg
@MoonMoon-rm2vg 3 ай бұрын
Someone is gonna get Doom running on that 😂
@DemonViewLLC
@DemonViewLLC 3 ай бұрын
@@MoonMoon-rm2vg Aye, it seems to be the first game everyone ports onto something.
@roymurray6374
@roymurray6374 3 ай бұрын
My Brother-in-law's El Camino runs a FiTech system. The thing that's hard to get used to, is not needing to pump the gas several times to start the engine.
@NikMitchell
@NikMitchell 3 ай бұрын
gotta say, my initial opinion on Patreon of the look at the color on that unit was tepid, but seeing it in the context of the rest of the car? Oh yeah, baby, DIS GON B GUD. Love the full setup they've sent your way - didn't realize how important something as simple as the gas tank was so important in the FI dept. Good stuff.
@MJ-fh8fw
@MJ-fh8fw 3 ай бұрын
One of my all time favorite cars, I'm glad I found this content.
@micahrichey5335
@micahrichey5335 3 ай бұрын
I had a 94 GMC SIERRA with a 5.7l and a TBI. I wish I would have never sold it.
@Null7Mereel
@Null7Mereel 3 ай бұрын
Im swapping a FiTech go classic black onto my 67 Impala this year with the full Tanks Inc setup just like this, can't wait!
@rookie__pilot
@rookie__pilot 3 ай бұрын
Hell yeah!
@KevCampbell
@KevCampbell 3 ай бұрын
Love, love, love this as a great drivability upgrade and a perfect fit for the Scrapstang ethos.
@Andrew-jh5uv
@Andrew-jh5uv 3 ай бұрын
Awesome Angel now we are talking 👍👏
@josephmatuszak3855
@josephmatuszak3855 3 ай бұрын
I love the consistency that EFI can bring. Just plz don't put digital gauges in the car. Hide the controller in a center console or something close by.
@rookie__pilot
@rookie__pilot 3 ай бұрын
Roughly what i was thinking!
@1944chevytruck
@1944chevytruck 3 ай бұрын
Awesome! CONGRATS!
@rookie__pilot
@rookie__pilot 3 ай бұрын
Thanks!!
@johngrimley3523
@johngrimley3523 3 ай бұрын
Looking forward to seeing that FiTech system run:)
@rookie__pilot
@rookie__pilot 3 ай бұрын
RIGHT
@thekatmann9730
@thekatmann9730 3 ай бұрын
Dude!!! This looks so great! I can't wait to see that unit get installed.. the rear tires are TOAST!! ((by the way... looks like some 'immature person' went a little 'ham' with a black sharpie in the Stable)) hahahaha
@DannerPlace
@DannerPlace 3 ай бұрын
This is gonna be an awesome build, can't wait...
@Boostin1503
@Boostin1503 3 ай бұрын
I think you found yourself a nice accent color for parts around the car. Looking forward to seeing the car run by the end of the month. :paranoid:
@rookie__pilot
@rookie__pilot 3 ай бұрын
Thats actually a GREAT idea with the accents! And oh boy i sure dam hope it runs by the end of this month!
@gerrywinzor1103
@gerrywinzor1103 3 ай бұрын
I think that fuel tank might provide more structure than the frame
@robaxelsson530
@robaxelsson530 3 ай бұрын
keep us posted!! FItech has a long bad rep with customer service and failing units. I know they sent this unit, im sure they may have "fixed" the issues (ecu, controler, interface, connections)... if you encounter any failures or short comings.... please post. Holley's sniper fell into the same situation....the sniper 2 apparently seems to most bugs worked out...let us know..
@mrwest5552
@mrwest5552 3 ай бұрын
into la carne y papas AlRIGHT ! i'll fire up the grill, Es Viernes !
@rookie__pilot
@rookie__pilot 3 ай бұрын
Exactly!
@Boostin1503
@Boostin1503 3 ай бұрын
Carne asada?! I'm there!
@mrwest5552
@mrwest5552 3 ай бұрын
@@Boostin1503 - si con salsa y Modelo Especial.
@Boostin1503
@Boostin1503 3 ай бұрын
@@mrwest5552 now you're just teasing. Meet up at the stable!
@mrwest5552
@mrwest5552 3 ай бұрын
@@Boostin1503 - no teasing allowed.
@philh9238
@philh9238 3 ай бұрын
I hope you have more luck than I did when I installed mine. I got tired of the junk sent it back bolted on an edelbrock 4 barrel on my 70 dodge dart
@bobuncle8704
@bobuncle8704 3 ай бұрын
So crazy. Love it
@samuelvera9449
@samuelvera9449 3 ай бұрын
well said
@robertlugo3388
@robertlugo3388 3 ай бұрын
Hey Angel, are you excited?
@rookie__pilot
@rookie__pilot 3 ай бұрын
Only ALOT
@robertlugo3388
@robertlugo3388 3 ай бұрын
What a great kit. Looks so complete. I'm looking forward to the install. Is there a discount code for viewers that might be interested in one for themselves?
@rookie__pilot
@rookie__pilot 3 ай бұрын
Great question, I will see what we can do!!
@jeffosim8789
@jeffosim8789 3 ай бұрын
It’s cool you got what you wanted, but I would have stuck with a carburetor it fits the theme better , and to me it would be easier and simpler . But I hope it works beautifully for you. 😊 1 question, it comes with 1 O2 sensor how do you go about setting up if you have dual exhaust? Would you just read 1 bank and it would just do the same fuel trims on both engine banks? Just curious.
@rookie__pilot
@rookie__pilot 3 ай бұрын
Carb was the original direction, but with all the heavy modifications and upgrades done i felt this also fit the theme!
@Mister006
@Mister006 3 ай бұрын
clean the backs of those intake valves!
@philh9238
@philh9238 3 ай бұрын
I’m not a fan of rubber fuel line even if it is stainless. It’s to bulky I bent all mine out of 3/8 nickel copper line
@tommcl8548
@tommcl8548 3 ай бұрын
👊👍
@sergioacevedo2874
@sergioacevedo2874 3 ай бұрын
Any reason you went with a carb efi versus a intake with efi at each cylinder. I have a holley efi on my 64 convertible but wish I had gone with the whole intake system so it would dump fuel at each cylinder.
@rookie__pilot
@rookie__pilot 3 ай бұрын
Since I was already headed carb direction with the intake, I thought it'd be the easiest way to convert. + I've had my eye on this kit for YEARS so it's perfect timing! also.. can you email me your shipping info for the Knipex, I think you already sent it but it got lost in translation. THANKS!! rookiepilot66@gmail.com
@sergioacevedo2874
@sergioacevedo2874 3 ай бұрын
@@rookie__pilot that totally makes sense I am curious to see how it compares to my holley because it’s nice but has a lot of weird quirks im troubleshooting but according to the holley forums it’s normal. The sniper 2 is the new improvement supposedly but I don’t want to spend another grand “upgrading” lol. Definitely looking to see how your unit turns out. And also how that other project go. You got this! And thanks I actually had not sent the info thanks for the reminder just emailed it to you.
@flyaz11
@flyaz11 3 ай бұрын
How much gas do you actually save by switching to a EFI Fitech?? What if you did the 69 mustang kit that way you get 20 or 22 gallon gas tank .
@magikahn
@magikahn 3 ай бұрын
Thatz not scrap... Aftermarket-Stang? Unique indeed...
@djparn007
@djparn007 3 ай бұрын
👍👍
@jamiegroves1761
@jamiegroves1761 3 ай бұрын
😎🍺👍🇦🇺
@karenmailenny
@karenmailenny 3 ай бұрын
FIRST
@rookie__pilot
@rookie__pilot 3 ай бұрын
Holy moly 😂
@Boostin1503
@Boostin1503 3 ай бұрын
That's not fair, i'm sure you literally saw when it was going to be done processing. LOL
@ulichy5
@ulichy5 3 ай бұрын
Angel is going to be flying up and down mount lemon 💨💨
@rookie__pilot
@rookie__pilot 3 ай бұрын
EXACTLY
Engine out...AGAIN | CVF Racing Dress Up Kit
19:02
Rookie Pilot
Рет қаралды 4 М.
EFI Fuel System Conversion | Scrapstang x FiTech
23:40
Rookie Pilot
Рет қаралды 3,6 М.
لااا! هذه البرتقالة مزعجة جدًا #قصير
00:15
One More Arabic
Рет қаралды 52 МЛН
Running With Bigger And Bigger Feastables
00:17
MrBeast
Рет қаралды 159 МЛН
ROLLING DOWN
00:20
Natan por Aí
Рет қаралды 11 МЛН
王子原来是假正经#艾莎
00:39
在逃的公主
Рет қаралды 11 МЛН
FITECH EFI force fuel install on small block chevy will this work?
36:41
SpeedSpecter1030
Рет қаралды 27 М.
Flying with Tiffany C152 | Student Solo POV
20:01
Rookie Pilot
Рет қаралды 1,4 М.
Busting the exhaust backpressure myth | Banks Entry Level
11:14
Banks Power
Рет қаралды 248 М.
Getting Closer!!! | FiTech EFI Wiring
17:02
Rookie Pilot
Рет қаралды 3,2 М.
Carburetor vs Fuel Injection
8:52
Nashville Early Bronco
Рет қаралды 69 М.
Fixing the World's Cheapest DeLorean For LS Fest! | Roadworthy Rescues
19:23
MotorTrend Channel
Рет қаралды 792 М.
No Lift? No Problem! | Body off Glasspar G2
18:06
Rookie Pilot
Рет қаралды 3 М.
We Had To Swap Out All The Oil Filters In Our Shop!
8:11
Royalty Auto Service
Рет қаралды 206 М.
5.0 Final Stages...Kinda | Scrapstang
21:10
Rookie Pilot
Рет қаралды 4 М.
The Fast Lane with Stevie Fast - Mechanical Fuel Injection Systems
19:07
Steve Jackson Racing
Рет қаралды 52 М.
لااا! هذه البرتقالة مزعجة جدًا #قصير
00:15
One More Arabic
Рет қаралды 52 МЛН