do s197s

All these wheels were trash

Anyway I can get the details on the rims shown on the Mustang in the intro with the big spiked lug nuts? ( time 1:33 )

gmt400 trucks 80s 90s 1500 trucks

What’s the name of the wheels in your thumbnail?

You can use the same information but just use 19inch wheels

Look at my car I'm one of the few people running basically this setup. On IG Phoenix5.0. Mine is 20x10.5 +25 on 275/30/20 and on Pedders XA coilovers.

295?

you’re welcome! 🙏

True Christina #stanggang

By going full gaaaaay !!

What size is the tires and offset of the wheels? I’m looking to run 275/30R20’s. What offset should I use? Pls reply

@@SirenS550 My first set up was 285/30 20 and my current set up is 275 35 30 the wheels are XXR 521 20x10.5 30mm offset I have a performance pack GT I have to run an 8mm spacer up front to clear the brembos. No issues no rubbing

@@ricardovaldez4658 HOLY FUCK I want XXR521 too!! This is perfeccccct 🔥thxxxxx

Do your front wheels stick out a lot?

Also, what’s your offset?

Velgen VMB9 Satin Bronze

Are you sitting on the Eibach sportline lowering springs ? (Red color springs)? Thanks

@@lifeofdrew5.021 no I have the pro kit springs. The black ones

Actually no I'm wrong I have the Sportline springs. I had to check. I didn't put them on, the guy who had this beast before me did. I have the box they came in. Definitely Sportline springs.

@@michaeldeloach838 sounds good thank you I have the same springs aswell!

@@lifeofdrew5.021 yeah the car sits pretty low. Almost too low for me. But it handles so well. It corners at high speeds like a race car. The tradeoff is the ride is pretty harsh. You feel every little bump in the road. I wonder if the pro kit springs would be a happy medium?

Did you learn? Bcz I’m in the same situation now lol

What size do you have on your FR4?

I’m not sure, but they look similar to the stock wheels on the GT350R.

Project6gr.com Seven for exact ones or LMR.com SVE R350 for the $

You should be good fam! Double check to see if that fitment is what you like though in our gallery!

Yes

Yes i have 20× 10.5 on eibach springs

@@audiction7 I was thinking that it would rub with the sport lines i was going to consider the pro-kit springs since they aren’t that low

@@audiction7 can I ask what you were running on the front?

@@audiction7 unreal brotha! and was the front wheel a 10x20?

Same. I'm not trying to turn my ford into a ricy mport.

i mean the specs listed arent stance boi at all and are pretty weak js

1Hand please someone answer this question... that’s the best looking setup

@@JacobScott To me yes, its the best setup.

What's the wheel set up specs?

Answer your setup questions!!! Lol

What’s your setup

You should be just fine!

@@fitmentindustriesgarage5583 Thanks for the quick response! I got them installed with no problems.

Damn i wanna see that

HRE’s look the best but them things are super expensive

need to be 18' minimum to clear the brakes

19 is better

Can u get 315 on rear?

Maybe you’ll make it into another video 🤘

You don’t need to lower your car if you don’t want to!

@@fitmentindustriesgarage5583 Thanks

What are you looking for?

UPDATE: they do fit ! i got some 335s, but they only fit good with Project 6GR wheels, and those are the ones Im getting

Rick L Awesome! Thanks for the update, man. I was wondering the same thing.

@@bendover8308 you can go 345s too but i went with 335s to play it safe:)

Rick L Thats crazy. I never knew such wide tires could fit. I’ve always thought of 315s as the max, haha.

@@bendover8308 KEEP IN MIND only the Project 6GR wheels 19x11.5 fit the 335s-345s width, any other wheel will not fit those sizes, so just an FYI.

What’s that

Hey man my advice is to search your vehicle in our gallery! You’ll see how others have their setup with wheel specs and fitment specs! -> www.fitmentindustries.com/search-wheel-offset-gallery

Depends on other specs like offset and the tire you're gonna run. Typically real wide all around square setups usually need the spacer on the front, not the rear, if you wanna run the same size and offset all around for rotating purposes (which is one of the main reasons to go square imo). Again it depends on the specs of the wheel like offsets and what tire you're going with. There are plenty of 19x10 setups that can be run square without the need for a spacer anywhere just do your homework. You go as wide as 11 all around with spacers on the front. You can run a diff offset on the front to avoid spacers but then you cant rotate them front to back and Visa versa which is one of the main reasons to go square.

My advice is to check out our gallery! You’ll see wheel specs and fitment specs on other people’s builds on the same car! -> www.fitmentindustries.com/search-wheel-offset-gallery

@@fitmentindustriesgarage5583 Thank you so much!

Check out some of these Mustangs in the gallery with flush fitment to see what specs they are running! -> www.fitmentindustries.com/wheel-offset-gallery?stance=Flush&sort=yno&year=2018&make=Ford&model=Mustang

I was wondering about that myself just today. Can those wheels fit under a 2018 GT, non PP? Looking to do a summer and track day setup with a square 305 setup.

Check SVE SP2

FRPP also sells pp2 replicas in different sizes: 9.5 and 10.5 front, 10 and 11 rear. Check their catalogue

No you Should not

It's not required but I would recommend for best ride and best handling. You can use stock shocks and struts for a while with lowering springs till you can afford a nice set of shocks and struts if you wanna do it that way many people do. If you can afford to do both at once that is recommended but do your research on what setups work best together and what setup works best for what you want.

Drag pack

Wrap colors are either hunter green/ British racing green or Satin metallic blue.

What type of fitment are you looking to go with?

Down to +35 will tuck no rubbing or rolling needed. You'd think they'd point out the limits but hey, this isn't Alex. Basically 20mm from stock OEM offset. 8 months later but hey maybe you're like me still doing research.

curious if you went through with this and did it fit?

We can definitely look into it! 🙏

305-315

Salvador Sandoval 315? Ok can u just explain like how wheels and tires work like the fitment like I want aftermarket wheels I don’t want it to look retarded. Like what rims with what tires? I want meat in the back

@coyote666 I think you're on the wrong app based on your last sentence bro

@@dillon9900 lmfaoooo😂😂😂😂

@@dillon9900 can u explain it tho lol I want a good looking setup

Shoot us an email to Wheels@fitmentindustries.com and we can try to find them for you!

Ok will do. If you can find these if there insanely high ill get them from you guys. You are the only company that has responded.

Velgen VMB9 wrapped in Bridgestone Potenza!

Would luv to know the wheel specs aswell,

What kind of tires are you looking for?

@@fitmentindustriesgarage5583 I was wrong about the size. Need 305's on the back and 275's on the front. Nitto 555

For sure! Shoot us an email to Wheels@fitmentindustries.com and we can check availability on those for you! 🤘

Velgen VMB9! --> www.fitmentindustries.com/store/wheels?sort=popular&brand=Velgen&wmodel=VMB9&susp=%20Stock%20Suspension&mod=No%20Modification&rub=No%20Rubbing%20Or%20Scrubbing

the one at 2:10

Yes! The front range will be a bit smaller 🤘

@@fitmentindustriesgarage5583 do you think 10.5 would fit in the front?

Velgen VMB9 Satin Bronze

Squared, you'd hit the ball joints in the front. Swap out to the PP2 ball joint for more clearance.

Maybe if the lug pattern is the same and stuff prob will fit it who knows

Yes! They just won’t poke as much since +35 won’t be quite as aggressive

With modification it can work

@@fitmentindustriesgarage5583 19x11 +22 all around on 275/35/19 all around lowered 2 inches on lowering springs ? no spacers added either in the front or back

Definitely can run that! Here’s some examples of others running 315 in the rear! -> www.fitmentindustries.com/wheel-offset-gallery?year=2014&make=Ford&model=Mustang&tire_height_from=315&sort=date

What’s the question?!

@@fitmentindustriesgarage5583 I have a fully stock 2015 mustang v6, and I'm getting new wheels. Im looking to getting a square setup of 19x9.5s, and I've had some people tell me they would fit and some tell me they would not. Would you happen to know if the 9.5s with an offset of +22mm would fit in the front with no problems.

Also while i gotcha, do you guys have the ESR SR01 Gloss Black wheels 19x9.5 +35 in stock on your website?

Dean Aiello so I actually have those rims for my mustang and I had to run spacers. I’m not sure what the offset is though. I want a set of rims that fit like the stocks so I don’t have to run spacers

Drag Pack

Ope