Fitting a linisher attachment to bench grinder

Рет қаралды 11,328

Күн бұрын

I have wanted one of these for quite some time now. Sure I could have purchased a dedicated linisher but given one of the bench grinder wheels was ratelyn used I felt this may be a more economic option & make better use of my bench grinder, which, to be fair, is really only used for sharpening drill bits & centre punches etc...
In the video I run through the install, give a few tips & tricks along the way & we give this new tool a test too...
Enjoy
Andy
Now, remember, you can get your dirty hands on the new Andy Mechanic Merchandise through the new Andy Mechanic Zazzle store, just click on the link below:
www.zazzle.co.nz/store/andyme...
Also, if you’re keen to get an embroidered work shirt or jacket then visit:
andymechanic.uniformnz.com/
Both Zazzle & UniformNZ can ship to anywhere in the World so if you are far far away then just email them for a quote.
You can also become a Patron to the Andy Mechanic KZfaq channel. Patrons get special access to up and coming projects, future info about the channel & of course background info on the Tool Girls too! Here’s a link:
www.patreon.com/Andymechanic
If you'd like to send something through by post - a letter to be read out in the 'Mail Call' videos or maybe a parcel containing a surprise for your favorite Tool Girl, maybe a new tool for us to use in a video or a KZfaq channel sticker for the cabinet door or toolbox then you can send it here:
Andy Mechanic KZfaq channel
PO Box 6265
Victoria Street West
Auckland
Post Code 1142
New Zealand
You'll be sure to get a shout out on one of the videos too!
….or just flick me an email: andymechanic@live.co.uk
Oh…and here’s Tool Girl Lilli’s web site, that’s right, Lilli has her very own web site! Damn….
www.lillisteele.com
Thanks for all your support, until next time...
Andy

Пікірлер: 15

@bluehill1275 Жыл бұрын

I bought one of these a few months ago (mine is the 2 x 48” version with the 8” contact wheel) and I must say that yours is the best assembly video for the Multitool that I’ve seen. Like yourself, I’ve always had a bench grinder in my shop, but rarely used it. Now I use it all the time, it’s fantastic. Where I live, in rural Canada it’s sometimes difficult to find a full range of the 2 x 48” belts, but quite easy to find 6 x 48” ones. I’ve learned that it’s quite easy and cheaper to take a 6” belt and turn it into 3 two inch belts. All it takes is one cut, and inch or so long at 2 inches to get started and then you can tear the belt all the way around. Easy Peasy. Thanks for the video.

@rodneylongjr3304 2 жыл бұрын

Love learning about tools and how they get installed. Keep up the great vids and work

@AndyMechanic 2 жыл бұрын

Cheers Rodney, all the best. Andy

@cobbleup 2 жыл бұрын

Thanks for the idea. There is one more adjustment that should be made....Adjust the the belt table to just barely come in contact with the belt for the full length of the said table. I know,,,,the instructions don't mention this adjustment but as you can see the capability of this adjustment is there.

@AndyMechanic 2 жыл бұрын

Definitely. I did do this after I finished the video... Thanks for mentioning it though....very important. Thanks again Andy

@scotthodson2467 11 ай бұрын

Fun video. What horsepower is the grinder?

@jasoncampbell6222 2 жыл бұрын

Where in the UK were you from originally Andy? I'm detecting a Yorkshire twang.

@AndyMechanic 2 жыл бұрын

Bang on - York & Scarborough :-)

@jasoncampbell6222 2 жыл бұрын

@@AndyMechanic just up the road from me in Doncaster but originally from Pickering. Wishing you all the best matey from over here in the homeland.

@stevenhjorleifson1050 Жыл бұрын

Do you know if it’s possible to mount this on the left hand side of the grinder?

@AndyMechanic Жыл бұрын

Hi, yes, I think so. Cheers Andy

@simonrawle7885 2 жыл бұрын

just wondering how long before you forget about the new attachment and walk in to it , its sods law

@AndyMechanic 2 жыл бұрын

Oh give it a day or two! Lol

@Equiluxe1 2 жыл бұрын

Just looked on ebay and amazon and there is nothing like it here in the UK just some puny sanding machines. Have to go to industrial suppliers here and pay the high price.

@AndyMechanic 2 жыл бұрын

That's a shame, I think this one is made in the US. Thanks for your feedback. Cheers Andy