Fitting a Mustard Bikes tail tidy to a 2024 onwards Yamaha MT-09

Рет қаралды 6,560

Ай бұрын

A step by step run through of the installation process for the Mustard Bikes 2024 onwards MT-09 (SP) fender eliminator.
This product is available from the following link:
www.mustardbikes.com.au/mt-09...
This video should help you understand where parts are and how to install your fender eliminator, it is a comprehensive how-to and should allow most customers to complete the installation on their own.
If you experience installation issues please contact us via our help email provided on your product card, we are always happy to help where we can!.
Apologies for the poor light and sound, we only just moved into our new filming room and hadn't finished setting it up!
Thanks for watching, and don't forget to give us the thumb's up and subscribe!
Tail Tidy: www.mustardbikes.com.au/mt-09...
Reservoir mount kit: www.mustardbikes.com.au/mt-09...
Mustard Bikes Apparel: www.mustardbikes.com.au/apparel
Website: www.mustardbikes.com
Facebook: / mustardbike
Instagram: / mustardbikes

Пікірлер: 45

@CosmicBitFlip Ай бұрын

Confirming this fits my 2024 MT09 in the US for those tuning in.

@MustardBikes Ай бұрын

Thanks for the confirmation, and thanks for the support!

@jasonwillette7386 27 күн бұрын

@luci-vl6 did you go with the 186 mm option for US. Cheers

@CosmicBitFlip 27 күн бұрын

@@jasonwillette7386 I did, yes. The 186 is the correct size for US plates.

@oliverhagvall4641 13 күн бұрын

Thank you so much for making this! Great step by step, saved me some time 🙌🏼

@MustardBikes 13 күн бұрын

@@oliverhagvall4641 glad it helped!

@bfarm44 Ай бұрын

Looks great and now I see where I can form and mount plates for a grab rail

@thehitlife7 Ай бұрын

I’m watching this as if I own this bike

@michaellb1880 Ай бұрын

I did 950mil already and now i can blaze the streets 😊

@stevesanelli90 Ай бұрын

Brilliantly presented Mark! A film star for sure⭐️👌

@MustardBikes Ай бұрын

😆I hope you watched till the end and saw the bloopers

@ThatCleanMT Ай бұрын

😂

@WoolfyG15 Ай бұрын

Great stuff mate! Might I suggest a lapel mic to improve the audio and remove the echo from the room for future videos. Worth its weight in gold!

@MustardBikes Ай бұрын

We have one on it's way! We have a lot of sound deadening in the room, but it still wasn't enough. We also have a remote monitor on the way to help set the focus a bit better as a few shots didn't come out as expected. It's a continual learning process and constant improvement for us and our film guy, who took this on without any prior experience.

@donsbergers9156 Ай бұрын

Wish I had this video a couple days ago when I did mine lol

@MustardBikes Ай бұрын

Always the way. Hope you got the install sorted without to much pain regardless.

@nathanwimhurst822 Ай бұрын

I cant wait to get my 24 mt09 this may just be the tail tidy of choice when it turns up espiecially being an Aussie company

@MustardBikes Ай бұрын

You'll love the new bike Nathan. Ready when you are and thank you for considering us and supporting Aussie owned and manufactured.

@aupopeso Ай бұрын

Do you know if your kit fits the USA 2024 Yamaha MT-09 ?

@MustardBikes Ай бұрын

Hi, yes it does! We have already sent numerous to the US in the first batch.

@CosmicBitFlip Ай бұрын

@@MustardBikes I can confirm this fits. I installed mine only two days ago.

@suba-dude5516 18 күн бұрын

Do you have an estimate for shipping to the USA? I'm contemplating getting this. TIA.

@MustardBikes 18 күн бұрын

We have a flat rate of AUD$30 (around USD$20) for international shipping. Hope that helps!

@Telesk1er 14 күн бұрын

I am from WI, USA and bought one. Shipping took 7 business days. Hope this helps

@MustardBikes 14 күн бұрын

@@Telesk1er great to hear! That is a pretty good turn around to the US!. We generally advise 10-20 days depending on your exact location (obviously remote areas can take longer hence the large difference in time).

@VisceralVisualsAuto Ай бұрын

What was the design decision around the choice to mount it so high up? As an Australian I love supporting Australian companies (I have already got and installed your rear peg delete kit) but I can't bring myself to get the tail tidy because it mounts so high and feels like it obscures a portion of the taillight which looks a bit visually disharmonious to my eye.

@MustardBikes Ай бұрын

To make it as short as possible while retaining clearance with the back wheel. If you go too short or too low you can risk interference with the back wheel at full suspension travel. The tail tidy does not interfere with the tail light itself and there is full visibility of the tail light from behind.

@TheBMWdriver Ай бұрын

Any info about the SP?

@MustardBikes Ай бұрын

This will fit the SP as well. Hope that helps.

@Brian-nz6ns 25 күн бұрын

why is the license plate at a 45 degree angle? Is it adjustable or something?

@MustardBikes 25 күн бұрын

It is slightly less than 45 degrees, which is the maximum plate angle allowed for Australian Design rules.

@Brian-nz6ns 25 күн бұрын

@@MustardBikes The stock bracket is 90 degrees and looks fine, so why change it to a 45 degree angle? I think it looks bad.

@MustardBikes 23 күн бұрын

@@Brian-nz6ns that is your opinion. Our customer base that allows us to stay in business obviously disagree. Ultimately everyone has a different view and you are under no obligation to purchase our products.

@redshiftit8303 Күн бұрын

Looks good... Went to your site, no 2017+ R6 one... 😐

@MustardBikes 22 сағат бұрын

Unfortunately we never got a hold of a 2017+ R6 to develop from. We did look for one, but with no luck locally.

@KjKase Ай бұрын

Where are those tank pads from?

@MustardBikes Ай бұрын

@KjKase, these were fitted from the dealer and we suspect are genuine Yamaha items.

@KjKase 13 күн бұрын

@@MustardBikes weird, I went to my dealership here in Canada and they said that Yamaha doesn't sell the side tank pads for the MT-09.

@MustardBikes 13 күн бұрын

@@KjKase indeed. I do wonder if they might be from the earlier model? Or maybe they just fitted aftermarket ones. As mentioned they were fitted at the dealer, so we unfortunately don't know much about them.

@lightpes4956 23 күн бұрын

It’s legal for Europe?

@MustardBikes 23 күн бұрын

@@lightpes4956 this is designed with Australian design rules in mind. ADR are very similar to euro rules, however you would still need to check with your local rules to see if it would be compliant.