Hi mate, this helped a lot! Thank you

Lovely tidy job Phil. 👍

Hi Phil, I like a neat finish and that’s what you’ve achieved 👍. Swift’s usb sockets are wired to the 12v socket circuit which is exactly what you have done 👍. Agree the hardest part is fishing wires through awkward spaces but it’s worth it to get it right. Cheers Rob 😀

That’s a lot of work phil 😮. Any excuse to get out of the house 😂😂😂

Hi Phil, good neat job, however any additions should have a separate fuse , I know the circuit you’ve tapped in to is probably fused but better to be safe 😊

Thanks for another interesting practical video. Always worth looking out for your videos on a Sunday morning.

If you had looked on KZfaq a chap, fitted one from a 12 v spare wire at the rear of the boiler an power input, as I fitted the same a few years ago.

Amazing job. I'm not sure I'll attempt it on mine (Alpine 2) as it's clearly quite a lot of work. I have an additional Berber socket to go in, but that should be pretty much a plug and play affair. While I do love Swifts, it does annoy me how penny-pinching some of the build was. If only they had put in the infrastructure behind the blanking plate.

We just have a good supply of plug in USB ports.

I did this last year but I had a 12volt wires under were I removed the chest yellow and white I’m surprised you don’t have that ? Mine is an Eccles sport

Wouldn’t it have been easier to fit another mains socket in the blank, wired to the existing adjacent socket and just plug a phone charger in when you need it ?👍🏻