Arrma Gorgon Brushless 3S Power Upgrade Bash Test

Рет қаралды 12,669

Күн бұрын

We upgrade the Arrma Gorgon Rc Car by putting a 3S Brushless Power system in and go bash it to see how well it holds up on the Dirt Jumps.
#rccars #rc

Пікірлер: 49

@seanrogers8548 7 ай бұрын

I bought one of these last week and immediately put a 3900 KV brushless spektrum system (100 ESC) from a typhoon in it w/ a fan. I cannot express in words accurately enough how incredibly tough and capable this is. My teenage son’s been bashing 50C, 2SLiPo’s thru it continuously at wide open throttle (34mph). Nothings broke, and the motor temp doesn’t budge. Truly the GOAT of entry level RC.

@FivoNine 7 ай бұрын

I agree, very strong truck and fun too, I given it to people who are new and drove crazy it and still holding up

@redblue40rc33 6 ай бұрын

Same as mine except I added the granite 14mm tires😎🥂 all stock gears and anodized aluminum ball joints and shoegooed the body with hot glue beads....also move the esc up to next mount holes...allows battery cable to come thru chassis without bending wires, arrma receiver box for gorgon too

@owen8538 2 ай бұрын

Best upgrade is hot racing motor mount alloy and servo saver alloy if breaks

@FeralRC 8 ай бұрын

Just when I thought our Traxxas Bigfoot upgraded with a Spektrum brushless system (slap in the face to Traxxas) was the ultimate 2wd monster truck... Now we need a Gorgon.

@williamcabello2142 6 ай бұрын

What setup did you get for it

@VS666 8 ай бұрын

Thanks for the quick follow up on throwing a brushless in this! Seems like it really loves it

@FivoNine 8 ай бұрын

Yea the truck holds up so well with the 3s system, Arrma should make a 3s version

@jpak1130 8 ай бұрын

3S gorgon is where its at. my body got mashed, but no parts broken still! one of the most if not most rugged RC vehicle i got!

@FivoNine 8 ай бұрын

I agree, we smashed this thing and still drives, one of my favorites go to trucks!

@rcveljekset 8 ай бұрын

Cool video, the video is nicely done. GREAT!👍👍👍

@CamelTrophy-HK 7 ай бұрын

Really cool 👍👍

@RcpsychoRen 8 ай бұрын

nice to see you in your work shop!! next a sbr2.0 run ? thanks

@BangForYourBuckRc 8 ай бұрын

awesome Brother ! One of the best Upgrade videos I've seen for this Truck! Just Awesome! 100%

@FivoNine 8 ай бұрын

Thank you brother, really appreciate the good feedback

@russellupkes8263 5 күн бұрын

That thing is so tough. It’s awesome on 2S and 3S.

@mariomozie2102 8 ай бұрын

Boy that thing rips👏👍 Hey it definitely needed 3'spower

@johnjay7961 8 ай бұрын

Super fun rc even on 2s brushed does like 26mph tuff looks amazing very light budget friendly. Armas coming up in the rc world . Cant go wrong

@JonnyJetson754 8 ай бұрын

It’s been a bit since I’ve stopped by however, Thanks 4 all the vids brotha 💯

@FivoNine 8 ай бұрын

Thanks for stopping by brother and your always welcome 👍

@dub2536 5 ай бұрын

I ordered my gorgon 2 weeks ago. Hope to receive it within 2 weeks.

@owen8538 2 ай бұрын

What tooth size pinion did you fit with the brushless i am fitting 18t with 3200kv similar to yours

@t3floz 2 күн бұрын

Nice video! Would the traxxas 1/16 vxl system work in the gorgon?

@joseCalderon1976 8 ай бұрын

For the price, plus the 3s system, this thing is pretty tough. The body needs to be reinforced with some gorilla tape. Hehe. Good stuff 👍

@owen8538 2 ай бұрын

Does anyone have problems with pinion hitting the plastic when using spektrum motor

@carlosbracho1644 3 ай бұрын

Hola buen vídeo si quisiera cambiar el motor al buscar un piñón debería ser por ejemplo Un 16 m0.8 32p ? Estoy en lo

@owen8538 4 ай бұрын

3s pack fit good

@richardhutchinson9646 4 ай бұрын

What we all learned is the Arrma gorgon is tougher than trees, also If Arrma can make plastics so tough smacking into trees on jumps don't break them, there's no excuse for the a-arms that break so often on the 6s range

@wilber8637 Ай бұрын

Hey brother, can I ask if this Gorgon is easy to break or damage the gear? Because I plan to buy one in July.. I am just worried that it will be more prone to damage after I change the motor to a larger KV..🙏 Please share, thank you.

@FivoNine 13 күн бұрын

So far only the body got broken, everything else holding up

@carlosbracho1644 3 ай бұрын

me I liked the video, I wanted to ask what sprocket did you use, how can I look for it? I know it's m0.8, but 32p, 42p? I'm confused. I hope your help, thank you very much

@FivoNine 3 ай бұрын

So the stock setup is 61T Spur with 13T Pinion. I changed the pinion to 18T

@ZSMracing 8 ай бұрын

I swear all RC car guys bins look like that especially if you have that many parts😂

@FivoNine 8 ай бұрын

Keep telling myself im gona make a parts wall, 3 years later still telling myself lol 😅

@paulmaldonado7039 3 ай бұрын

Dude do you have to replace the servo ,saver?

@FivoNine 2 ай бұрын

Nope

@williamcabello2142 Ай бұрын

What battery were you running a 2s or a 3s does the Gorgon take a 3s

@conniepiercy468 Ай бұрын

He got the Spektrum upgraded system that can handle the 3s but the stock esc on the gorgon can only handle 2s

@chrisryder4709 8 ай бұрын

I'll be putting 3s in mine today , I'm wondering about tires for this thing , I like the stock ones but , wanna get a little more ,,,,serious ?? Tires 😂😵‍💫, got e 6000 drying now , I'll be running it tomorrow, cool video again , thanx ! I can't believe I don't know that spot , 😂 where's that at

@FivoNine 8 ай бұрын

No problem, the stock tires seemed to be doing good on it. The place is out in Dishman Mica by Craft and Gather

@chrisryder4709 8 ай бұрын

@@FivoNine you gunna be doing any big 5 scale stuff , like Taylor stuff , I got three of them now looking for more guys to race with , they R ! THE PINNACLE OF THE rc driving experience , and the builds are intense ,and so is the power , there ABSUGULOOOOLY mental !! If we could get together some time I was gonna have you run one or two of them , I love handing the controls to guys ,it creates a giant smile everytime

@FivoNine 8 ай бұрын

@chrisryder4709 I have the Losi DbXL and it's pretty weak with stock engine, I was thinking about getting something bigger for it like the taylor engines. Last case scenario I would turn into electric but I like the gas version

@dougswafford4481 7 ай бұрын

I just got this car runs great one problem when I charged the battery and went to run it again I’m not getting any steering. Could you please help me out I’m new to the rc world lol

@FivoNine 7 ай бұрын

Make sure the servo wire is connected and in the right slot