I had never taken apart a lawnmower's workings before. It's a Poulan 500e mower. After watching this, I dove in, and after finishing, the mower started on one pull. I was so jazzed. I yelled, "I have made fire!!!"

I was on the verge of buying a new mower but then I found your post, which enabled me to fix mine very quickly. Thank you.

Bro thank you mate I'm from the UK I have turned this into a business just made my third repair in 8 hours

Followed your steps today and my long-neglected baby started up on the first pull. Thank you!!!

The most easy and clear explanations on this subject. Showing when it does start or only start for a feew seconds.

Amazing!! Didn't even have to fully remove the carburetor. Worked perfectly!! Thanks so much!

Thank you Buck! This worked like a charm. Mower is running better than ever!

Thank you! Life would be so much more difficult without people like you.

This video is awsome,’ just followed your guid lines,’ and poof my lawnmower is working again. Thank you

I followed your instructions step by step and I finally have my lawnmower working like it is brand new!!! You saved me money by taking my time instead of sending it for repairs. thank you!👍

This worked like a charm. You probably saved me $100!

SCORE!!!! Thank you, thank you,thank you!!!! Did exactly what you demonstrated and it works better than ever.

I was given a Craftsman/ Briggs and Stratton gas lawn mower that looks like it's never been used, it is less than ten years old. I'm sure this video will help me when I try to get it running!! Thank you very much!!

wow... i run a lawn care business and i chit chat with the guys at the shop and they have told me about all the complicated stuff i dont understand... buck you just saved me thousands of dollars thanks brother!!!

Nice video, Thanks for putting it out. I believe that you have helped a great many people that probably don't have the money to have their mower worked on or to just go buy a new one. Good luck with your channel.

Very, very Informative!!! Thank you SO much fir doing what you do to help others save time and money!!! Bless you. 👍🏾❤️

I really enjoyed watching this & now I’m going 2 follow this same procedure.

I don`t know anything about repairing lawnmowers. Tried what you said and basically the lawnmower started from the first pull. I`m very grateful - thank you!

Clear, concise and to the point. Great tutorial, many thanks...will be giving this a go tomorrow 👍

Priceless. Fixed mine in 15 min. Even changed the air filter (used an aquarium filter cut to size, no spare parts around me). Pulled the bowl (dripping fuel, but so be it), cleaned it out, cleaned out the nut holes, re installed it all and bam! First shot. Thank you. Saved me hours and $$$ dragging it somewhere....

Awesome job that the first thing my dad taught me when i started cutting gas at 11 year old. and we did not have ethanol gas back then.

Most of my yard equipment comes from the "curb" and I greatly enjoyed my equipment to this day!

Thank you Buck.. your video makes it seem so easy. My boys bought me another mower instead of trying to clean out the carburetor. I'm going to try cleaning it myself when it gets cooler outside.

I tried it and it worked saved me. Thank you

Nice informative video for those who are just learning. I'm sure it will save someone money when they see how easy and quick a mower can be fixed. And you're right. 99% of the time it is just that easy to fix one.

Thanks, it helped me out. Works great now!

Wow...great video. clear and easy to follow. great post!

Thanks for the video i will try that to my mower tomorrow GOD bless you!!!

that's pretty cool got a brand new mower now It looks good Thank you for the video

Great video , thank you so much guy . Very informative.

Worked perfect for me, thanks very much, was about to go looking for a new mower.

Nice I was looking for a new mower, but I think I'll go try this first thank you so much !

Worked for me. Thanks so much!

😳😳😳😳😳😳 Thank God for dad's! Man code is a beautiful thing!

Thank you Mr. Buck your solution to why my lawn mower ( a B/S model 90000 140cc) kept cutting off was absolutely correct. It's a very new lawn mower but sat a couple of years with a little gas in it. I looked at the other KZfaq channels until I came across yours. I tried all of those suggestions except take off the carburetor. I was able to locate the fuel injector and put a fine pin into the hole, and then put it back together. And to my amazement, it started right up and stayed on. You're the best.

excellent video. Many thanks! 👍

Thank you SO much. This worked!

Thank you for making this video. It helped me to get mine running again. Feeling very blessed today!!

It worked, thanks

Thanks. I am going to try it.

Your awesome. I have the same mower. I tore it down today cleaned it up. Removed any rust. Cleaned the carb and the bowl, the jets in the carb. Replaced fuel lines painted the metal where the free solution took the paint off. On my carb the choke lever was broken so I glassed the piece back on and shaped it. Still has the same symptoms you just fixed. You learned me I'm going go drop the bowl again now . Ty

Thanks. Good job.

I was frustrated with my Briggs and Stratton 625 series that won't start. Followed your instructions and its working again! Thanks!!!!

Thanks Buck! - this was exactly what was wrong with my mower. Also, it doesn't stall in the tall grass anymore.

Thank you for the video

Great video, only wish I had found it sooner, could have saved myself a couple of blisters, the nut was blocked on mine, like a different lawnmower now.

awesome, Excellent!!!

You are awesome man! This helped me 100%! Thanks for the video, time, and effort!

Thanks great info video bless u sir

Thank you

What else can I say? Thumbs up! I will certainly give this method a try, considering that my Toyota push mower has the same issues that your mower showed in this video. My mower is a Toyota HRA214 (circa 1984). This mower has been in the family since it was new. It is in relatively good shape, though I sent the carburetor out for a rebuild about 3 years ago. The mower ran great after the carburetor rebuild, but the next season it wouldn't start. It is my backup mower, but I would like to get it running again. I'll be giving your method a try, considering that the mower currently runs for about 10 seconds with a blast of starting fluid before stalling out.

Followed step by step just now and it started perfectly. Thank you for this video! This was last step before it got the garbage because we already put new spark plug too

Thanks 😊

I didn't even think about starting fluid thanks

Thanks

Just found your channel today. Liked and subscribed. Thank you for sharing your knowledge. Now, I need to see if you have any videos on weed whacker and riding mower repair.

Thank you! My Toro wouldn't start for my first mow of the season. It had started the first or second pull the last 8 years. Tried a few of the normal things and then some but once I did what your video shows it started on the first pull! Thank you, thank you, thank you!

it worked, thank you for your video

Good video mate .. I use a micro drill bit on the jets .. that does a good job too.. ta for the video mate

🙏🏻 thank you

Thanks for your time to make and share the video. STA-BIL Carb/Choke & Parts Cleaner from Harbor Freight also can be used to clean the parts. In another video I saw car brake cleaner was used.

Awesome video mate, subscribed and liked

Great 👍🏾 an simple #Thanks

Thanks !

Do the backflip, btw thank you. Got 2 stratons for 30 bucks, wanted to get them running and use one as a personal mower and turn the other into a go-kart cause it's 6.5hp other one is 6.25. this is dang the best video I found so thank you for the content I'm subscribing u fr making my small motor dreams come true

Any chance u show us how to get the self drive wheels working great job with the carb

Hi any chance you could help with the governor spring ?. I have the same engine as shown in the video thanks

That wos good Can that corb work with a 6.5 mower

i put wrong fuel into my old Stiga Multiclip. it ran perfectly last season. but want start now. I will try to fix this tomorrow with your awesome video! do you think your steps will help (considring wrong fuel) i will empty and add new and correct fuel also

Hey Buck! As you may expect, my Craftsman lawn mower didn't start this spring. I fell on some video from sears, and it was BS. It was asking for specialized tools no ordinary people have. Lucky me, after a bunch of other videos, I found your 10minute clip. It didn't take 10 minutes to me, because I had to buy a new spark plug and air filter. They were 10 years old. But with your help, with my ZERO background in gas engines, I FIXED IT. It was exactly as you described, in the carburetor. So let me say a BIG thank you!!! I opened myself a channel for newbies in electronics here: www.youtube.com/@CU_Wiring_Electronic_Projects/videos And guess what? You have a new fan! Cheers, Chris

Holy shit pickles! This worked like a charm. Thanks!

Tyu sir! Kids were a bit annoying though!

I’m gonna do this today 😅

Thank you so much. I am a female and just tried to get my mower running after about 4 years of non use. I had already changed the air filter and the oil and this in itself was quite something for me to attempt because I know computers, not small engines. I was getting ready to do what you showed here because your instructions were so clear. I ended up being able to use a particular product (not sure if it will let me mention that here but the brand name starts with an S and the product itself has FF as the initials). But thanks for this video. I would have stopped and hired someone at this point but because I was prepared to take that carburetor out and do what you showed here, you saved me a ton of money. I stood in front of my garage with it running grinning from ear to ear.

Gas power over batteries any day! I worked on small engines most of my life and brings joy to my heart when a mower, blower or whacker kicks back to life! Enjoyed your videos!

Watched this video twice and not mechanically smart at all. Followed your steps and guess what? MY LAWN MOWER IS NOW WORKING AGAIN!!! I have had it for 18 years and thought it was time to trash it and buy another one! I was SO SCARED of doing something wrong during the repair because I'm not good with fixing things but your video made me believe I could fix it and I DID!!! You saved me $ from buying a new mower too!! THANKS SO MUCH AND GOD BLESS YOU for this GREAT video!!!

Thanks for sharing your experience, i got 3 of them and I am sure that this trick will get them going. Blessings

Buck! Help! Ive changed spark plug, air filter, cleaned the carburetor, chrcked the fly wheel pin. Fuel is flowing when bowl is down, and shuts off when up. Clean bowl nut. What else do i try?

99 outta 100. Pretty good 99%

Man. I just wish I had been able to see this 30+ years ago... Its realky hard to believe that it could be as simple as that clogged needle valve to fix. But I shall certainly try on some of my 10 or so non-running hand mowers.! They don't make it "to the curb"!

I'm hoping this works after I go get the cleaner, even with the old fuel. I have a Toro timemaster mower that I really like, but it's so hard to start. Last year I did the spark plug and new filter, and of course put the blue enzyme stuff in the fuel when it had to sit. Already did the lawn once this year, but now it briefly starts and stops right away. The filter and spark plug were the last time I used it last year. (My effort to DIY).

ALWAYS Run Highest Octane Premium Gas in all YOUR SMALL Motors .... INCLUDING WITH OIL .. I never have problems ..

Hello I wanted to say thank you. My friend's Craftsmen mower would not start. I had replaced the spark plug. I followed your direction and cleaned out the main jet and the mower started with no problems. Thank you so much.

I took my carburetor completely off to clean and while doing so two springs disconnected and I don't have a clue where they go The mower you are working on in this video is just like mine. Can you tell me where these springs go. I would ate to pitch this mower because of two springs.

I have 2 mower that won't start. An really old Craftsman and a Troy Bilt TB110. The Craftsman has a really weak attempt to turn then it dies. The Troy Bilt last week I got to run for a few minutes then it died. Now it won't even do that. I've replaced as many pieces as I could. I don't think they're getting any gas. I've tried the drilling the hole technique but it hasn't worked. I put the hole just about in the middle and I'm wondering if it's too covered up to breath. I'm either going to make a hole lower or put a hole in the top of the cap. I bought new caps so destroying the old ones is no problem. If u have any suggestions please help. Thanks. My Craftsman did start when I shot carb fluid inti the carburetor. The Troy Bilt didn't. Yesterday I put 2 gaskets behind the air filter on the Troy Bilt and cleaned the bottom jet again and it didn't help. Also cleaned out both fuel tanks and did oil changes

How often should I change the oil in my residential push mower with Briggs and Stratton motor ?

99% it is... Its alive, its alive 😂thank you so much

Wow

on my honda mower i always close the line to the carburetor and let the mower run until the remaining gas in the carburetor is used up. Do this every time I complete mowing. Starts on one pull next time I user it

How often are issues trash in the gas tank?

What good is having a Cadillac of a lawnmower, with a Pacer motor? 👍🤣 Companies know how to keep you buying, or paying for services.

yay

You magically had a clean carburetor too. Did you forget to film that part?😮

You forgot to say anything about the bowl gasket I’ve yet to take off a bowl and be able to get a used gasket back in place because usually it will expand and be bigger

So, did all the things and she still doesn’t work. She fired up with starting fluid. Just got it last year and it was leaking something awful from the bowl. Replaced gaskets and put it back together. Started fine. Didn’t leak. Then it sat for the winter and now it won’t start. Cleaned the carb and jets and still no joy. Any ideas?

My lawn boy just died. 24 years never took more than 3 pulls even after sitting all winter. Never needed repairs. Il miss her

I had to pay huge money to have my mower carburetor cleaned every spring, so I started buying a new mower every year because it's cheaper than paying someone to start it. I've watched tons of these videos. I'll be buying another new mower next week. (the last two I bought still have the manufactures tags on them) Too funny!!!!!

It would bea good idea to try to start the mower before you put the air cleaner back on. If it didn't start you would remove the carb to clean all the ports, jets, etc. and you would already have the air cleaner off.

Woooot wooooot

I havre done this on my expensive TORO super recycler model 20057 that is close to 20 years old. This is a self propell one It was always inside between cutting my large lawn. Sadly my problem seems tp be more difficult to correct, than the one shown. After cleaning the carburator , changing the air filter, putting new synthetic oil 1- It took near 20 strokes with a few times pushing the button to inject gazoline to start the engine without any smokes from the exhaust port. 2- After starting, I cut for more than half an hour, very tall grass with the bagger without any problems. The engine running great. The tunnel pushing cuts to the bag was totally jammed by the grass, and the the engine didn't show any signs something was bad with it. 3- Could it be bad a bad spark plug ?, or some electrical problems ? Thanks for your help Luke