Mackie DL32R mixers are known for ribbon cable issues. This video shows how to open the case and re-seat the output ribbon cables (black). A similar procedure can be used for input cables (grey).
Пікірлер: 41
@jamescartwright47504 жыл бұрын
Thanks - that’s my job for today! Nice to have a quick guide to talk me through it and show me the correct ribbon cable.
@kvergoossen4 жыл бұрын
Thank You, Thank You, Thank You! I almost brought my Mackie DL32R to a service centre. Thanks to your post I had my (huge) problem solved within a few minutes!
@brsstudio92633 жыл бұрын
Thank you Mike! I probably wouldn't have dared to take a look inside, and instead sent to Mackie- this video saved us downtime, much appreciated!
@WoodlawnSound3 жыл бұрын
Thanks so much for watching!
@bigcoque3 жыл бұрын
Thank you so much for putting up this wonderful video. My Macke dl32r had a major output failure at the gig on Sunday and I was able to isolate and fix the problem with your advice. You rock and you’re keeping us playing, too! Thanks again!
@WoodlawnSound3 жыл бұрын
Great to hear!
@ericdonnelly5402 жыл бұрын
It's may 2022 and this video just saved the day. Thank you so much from NC. Well done
@WoodlawnSound2 жыл бұрын
Great to hear!
@ericdonnelly5402 жыл бұрын
My headphone output on my dl32s stopped working. You wouldn't know how to fix that one would you?😉
@paradigmpartyband77443 жыл бұрын
Michael, thank you very much for taking the time to make and post this video. We were able to fix the same issue on the input side with one of our channels. All is working as it should now. Many thanks.
@WoodlawnSound3 жыл бұрын
Excellent! And thanks for letting me know it helped!
@ivorycj4 жыл бұрын
THanks, Michael - we appreciate your tips! CJ @ Mackie
@XardacoX4 жыл бұрын
gracias amigo! me empezaron a fallar varios canales, pero los logre solucionar con un poco de aire!
@greysbeltranoficial2 жыл бұрын
Te fallaban canales o auxiliares?
@CryptoTonight93932 жыл бұрын
aaaaah this may explain the issue Ive been having with some of my outputs where it sounds like there is a gate on them where they cut in an out with the volume of the output
@fernandou.hernandez7010 Жыл бұрын
Gracias por el consejo, de casualidad se podrá hacer lo mismo con las entradas de micrófono?
@WoodlawnSound Жыл бұрын
Si!
@bsounds34854 жыл бұрын
Michael you the best man
@catfish61385 жыл бұрын
Thank YOU Michael!
@ericdano2 жыл бұрын
So, my DL32R is having this issue as well. What is spray you used??
@ericdano2 жыл бұрын
Nevermind, I saw the comments. My mixer is probably what.....7 years old now. It's time to clean it and reseat stuff. Have some DeoxIT coming.
@WaioluUkulele Жыл бұрын
Hi, network led is red in the video, is it supposed to turn green when a device is connected? Like your ipad
@WoodlawnSound Жыл бұрын
Good eye, yes that is correct. Maybe it was red because my cover was off (?) But as you can see in the video, the iPad was connected OK.
@WaioluUkulele Жыл бұрын
I only asked because I’m having the same issue. All my devices connect and operate fine but my Wi-Fi led stays red. Contacted Mackie and tried all their suggestions but still the same. Please let me know if you find a fix. Great video and thanks for doing what you do. Really appreciate it.
@WaioluUkulele Жыл бұрын
Hey Michael, I just wanted to say Thank you. I took the time to look into my DL32R and followed your instructions and BOOM I got my headphone output back, my 13L and 14R main output back and all outputs sound the same. Once again Thank you very much!!!
@DavidYoung-jh8wr2 жыл бұрын
So I have a 16 and opened it up hoping to see the same layout sans channels etc. Well its nothing like the 32. Can you do a video on doing the 16. Thanks
@JustinCrediblename4 жыл бұрын
Is the product used called "Precision contact cleaner" by "sprayaway" brand?
@WoodlawnSound4 жыл бұрын
Yes, that's what I had onhand. I'm told DeoxIT works very well.
@mackglenn29455 жыл бұрын
Thanks!!
@garlandnelsonsoulsessioned13432 жыл бұрын
Thank you Thank you!
@WoodlawnSound2 жыл бұрын
You are so welcome!
@tjstevens0014 жыл бұрын
What would cause the 2 1/4 monitor outputs to go out completely?
@juanchula172 жыл бұрын
Hi Michael. Thank you for then info. Do you know often this happens? I mean I clean it now, when would Appear again? Approximately
@juanchula172 жыл бұрын
The idea is to make periodic maintenance
@WoodlawnSound2 жыл бұрын
I think it depends on a few factors, like humidity where you live, where the mixer is stored, how often it is transported. I'm in relatively dry Colorado, and have reseated and cleaned the ribbons twice since 2015.
@juanchula172 жыл бұрын
@@WoodlawnSound I understand, thank you very much
@juanchula172 жыл бұрын
@@WoodlawnSound I bought new last week and it had problems with ribbon A. I saw your video and avoid to send to guarantee cause I live far away from Buenos Aires in Argentina. It works excellent now!
@dylandylan117313 жыл бұрын
Are they becoming unseated or is it corrosion on the pins ? 🧐
@WoodlawnSound3 жыл бұрын
They become unseated. It sure would be great if someone could offer a fix for this. It's the one and only issue I have with the DL32R.
@zadokmills72024 жыл бұрын
please which cleaner did you use?
@WoodlawnSound4 жыл бұрын
I had some industrial cleaner on hand; but most people use DeoxIT. Best of luck to you!