Fix it Friday! - Killing the Hum in a Guitar

Рет қаралды 274,564

8 жыл бұрын

In this video we show you how to fix the hum in a guitar, especially a guitar with single coil pickups. The guitar shown is a 2003 Mexican Telecaster with handmade pickups.
We use three methods to take care of the hum:
-Shielding
-Star Grounding
-Shortening Wires
-Twisting certain wires together (phase cancellation)
WARNING:
If you rely on the information in this content you do so at your own risk and you are responsible for the results. You hereby release Create!, it's affilates, subsidiaries, and any person included in the making of this content expressly or implicitly from any and all actions, claims, or demands that you, or any person including heirs, distributees, guardians, next of kin, spouse, or legal representatives
now have, or may have in the future for injury, property damage, death or any other liability that may result from use, misuse, or reliance on information provided in this content.

Пікірлер: 326

@SaxophoneHitman008 7 жыл бұрын

I started down this road as an actual electronic engineer. Yep, truly and indeed. For 30 years I've been explaining my ass off about this and other principles that apply to guitars and especially tube amps. IT'S SO refreshing to know there is at least someone else out there who is spreading the correct information! Bravo dude. And thanks, now finally I can sleep at night :)

@create2009 7 жыл бұрын

Thanks!

@oneeyemonster3262 7 жыл бұрын

i have a shit load of SHIELD CABLES...i suppose they;re sort da ore twisted with aluminum foil, braided and thick ass jacket, No wonder all my home made guitars dont hizz ot hummm....Plus the Cable from guitar to amp are also shielded..lol

@davidkornblatt991 6 жыл бұрын

WHY DOESN'T EVERY ELECTRIC GUITARIST WATCH THIS?

@roadapple66 6 жыл бұрын

Gregs Guitars: I too have a degree in Electronics Engineering Technology, and I agree with you. I have worked for many years in factory's that produce Computers, switches, modems, test equipment, hard drives, etc. I have also worked for the Air Force Satellite Control Network (AFSCN), and as a Satellite Systems Engineer for Lockheed-Martin. I am now retired, so I work on tube amps, effects pedals, and guitars for amusement. It's good to see another Engineer / Technologist on these pages. Someone that understands WHY things are wired / configured the way they are instead of just doing something because they were shown to do something a certain way. I'm glad I'm not alone in this! Thanks!

@DougHinVA 6 жыл бұрын

glad you can understand it.... it's too complicated for guitar players. they are NOT into basic electronics, see ?

@cattledog5464 6 жыл бұрын

I got my wires so short that they won't reach to connect. Zero hum.

@rowanpattisonguitar 5 жыл бұрын

@TheForce_Productions 5 жыл бұрын

🙄

@JLchevz 4 жыл бұрын

that solves it lmao

@AutoDIYdactic 7 жыл бұрын

I have to say, I've watched many videos on guitar hum and this is the most in depth explanation I've heard yet as well as all the helpful stop gaps you can try to reduce hum.

@TheJams4live 6 жыл бұрын

This video literally saved a guitar from being thrown away. Thank you so much.

@create2009 6 жыл бұрын

Great!

@garrettodonnell4177 4 жыл бұрын

Leo Fender was an electrical engineer who knew very little about how music worked. Kind of funny that his invention is now the domain of musicians who know very little about how electricity works. :)

@marshallohio5512 3 жыл бұрын

Took a friend's brand-new g&l legacy that was horribly set up from the factory, and made the guitar playable for him. This was a $1500 plus tax guitar. The buzz / hum was nuts !! I did the cavity shielding, twisted the three pickups and out put jack wires. Grounded the back of the pots by Daisy chaining with a single wire, and reversed the out put jack wires. Setup the bridge and all saddle heights. My friend is still blown away today. Why folks pay $1500 for unplayable strats from the factory is beyond me. I do this work for free for those who think the guitar needs different pickups installed. Oh, using a TC Spark Booster with a decent amp will keep the finished strat from always being in its case or resold. Cheers

@Smilesjones 6 жыл бұрын

Here is a lucid explanation of what the factors are which add unwanted "noises" to a guitar signal and the same kudos for your killer suggestions! Thanks very much for helping me resolve a grounding issue just now; especially shortening and twisting the output and ground wire up to the output jack. Worked amazingly!!

@codebeat4192 5 жыл бұрын

Now that is a short, effective and clear explanation, well done!

@coffindancer38 3 жыл бұрын

Finally!!! A guitar guy on youtube that understands the star ground!!!! Every video about eliminating hum should begin by telling folks to take out those single coils and throw them on the workbench to keep screws handy. Get some aftermarket humbuckers and youll reduce him and have a real guitar to play.

@shigjetar 7 жыл бұрын

This is the best video I've seen explaining grounding, now I've got an afternoon of work to do on my guitar! Thank you so much!

@create2009 7 жыл бұрын

Thanks! How'd it come out?

@erickt1974 7 жыл бұрын

Question. My guitar has 2 cavities. Control Cavity and Pickup cavity. I understand that I have to ground the pickup cavity shielding with a wire connecting to a pot but do I ground the control cavity or does it ground when I screw in the pots? (It's a Les Paul Junior)

@tswrench 7 жыл бұрын

I appreciate this info and your presentation of the material, but the most valuable thing you could've done, you didn't do, which is to provide and A/B, before and after demonstration of 60 cycle hum, and how this method helps to attenuate that noise.

@timdixon1166 5 жыл бұрын

As an electronics tech who has just got interested in guitars, I have always been surprised that most guitars do not use screened leads for pickup wiring. I bought a pawn shop no-name strat copy really cheaply which I figured I would customise. It is a nice looking guitar with a dead straight neck, good tuning screws etc. but with crappy strings and missing the springs from the bridge. Who knows why... It seems to be hardly used so maybe a kid owned it...I decided to check out the pickup wiring expecting the usual mess but was astonished to find ALL the wiring was in screened lead. It used star grounding, had a large screening plate on the pick-guard that the pots were mounted on and the cavities had all been coated with conductive paint. Needless to say it was silent! There are some really well built copies out there!!!

@lulumanus9025 5 жыл бұрын

Thanks much. Have a top of the line Squire Strat. Overlooked the twisted pickup wires when I did all the rest of the shielding. They had the pickup wires in rubber tubing which looked neatly done so I left it. This time I cut it off and did the twist. Left the pickup wires separated. No more hum. Now I can actually use this guitar with single pickups.

@ckdesign 4 жыл бұрын

terrific, clear overview of the problem and solution. had massive hum from my '83 MIJ Squire tele - hum would go silent when I touched the strings so it was primarily a shielding problem. gave it the full treatment you outlined: copper tape shielding of all cavities, soldered ground wires between each of the cavities, shortened wiring, tight twisting on pairs for both pickups and output jack and finally, star grounding to a single pot. outcome couldn't have been better - the difference between touching/not touching now can barely be perceived and then only if you are listening carefully to *_try_* to hear it - it's effectively *_NIL_* . thanks so much!

@DiMazzimo 7 жыл бұрын

Thanks a lot! This worked great for me. I used aluminum foil, which I connected to ground, and twisted the black and white cable from my single coil pickup. The hum before was terrible. Now it's almost silent. I was about to give up, but now my guitar is great again!

@create2009 6 жыл бұрын

Fantastic!

@holy7 6 жыл бұрын

I’m going to try this weekend, hopefully it works. My toggle has terrible buzz on 5 of 6 positions

@TheForce_Productions 5 жыл бұрын

Make your guitar great again! 🤘😎🎸

@quaidmarshall8969 2 жыл бұрын

@@holy7 4 years late but did you fix it

@kutanghansip32 6 жыл бұрын

wow, thanks man! This is worked in my strat! I've shielding before, and check the electronics it's fine but my guitar still noise. After watch your video I twisting pickup wire and shortening them to pot & switch. It's work! Thank you so much.

@HankleburyTV 6 жыл бұрын

Thanks for the nice, straightforward explanation of the problem causes and their solutions.

@paulbcote 3 жыл бұрын

Thank you for the concise, yet thorough explanation!

@lynyx77 7 жыл бұрын

very useful and great explanation, hope to see you back with new videos

@atomicguitars7123 Жыл бұрын

Best video out there that explains hum / buzz noise on guitars.

@Spitfireseven 6 жыл бұрын

I am a tech and your video is great because anyone can understand it. Thanks for the great explanation.

@lawrencebrett8993 6 жыл бұрын

Wow that is such an excellent explanation and almost cost-free solution to the problem. Hopefully when I've done this I won't need to go and buy a noise gate pedal. Many many thanks!

@Jenisonc 5 жыл бұрын

Wow. Incredible video! Thank you! I have a heavy hum from a simple piezo set up cigar box guitar but I believe this will help me learn what I can do. Thanks again.

@wrg1183 Жыл бұрын

Thank you! As guitar tech hobbyists, the last thing we want is to watch someone play guitar and tell us to turn the volume down. We want actual applications, and you provided them.

@curtrod 2 жыл бұрын

dude this is the best explanation and demonstration of this on youtube! bravissimo

@thiagosolano8269 Жыл бұрын

Man thank you very much, you saved me life and my guitar kkk the best advice I have gotten from this KZfaq in years. 😎👍

@groakersmusic2713 Жыл бұрын

Great video. Organized and explained very well. Thank you for making this! I will definitely share with friends :)

@mathiasluyten 7 жыл бұрын

Most helpful video i've found so far, thanks!

@IamUncledeuce 5 жыл бұрын

Thanks, a couple of added techniques I was not aware of!

@NickWeissMusic 7 жыл бұрын

Best video on the subject I've ever seen, I learned from it and I've been a pro guitar tech for 20 years. I knew what to do, but not exactly why to do it, couldn't have been explained clearer. I had never heard of the star ground before, most manufactures don't do that. I've never had a complaint after shielding and all the other steps, but it certainly can't hurt, and will probably make wiring up all the grounds on a big job easier anyway.

@create2009 6 жыл бұрын

Awesome! Thanks for the kind words. I've found that in most of the guitars I've been inside of, that manufacturers do some sort of star variant... that is they will daisy chain to a common point to save wire. It's really about resistance between points in the circuit exceeding a certain value. "Star grounding" is an easy way for folks to get it right without having to understand what's going on. Daisy chaining often fails not because it's "bad" but because it's picky and not easy to troubleshoot. It would be easy to run a daisy chain through steel potientiometer shell or a tailpiece and have no idea what's wrong. Also, any noise from corrosion that develops in the wire or solder joint over the years is summed down the daisy chain, this cannot happen in the star configuration.

@TheChadPad 5 жыл бұрын

@@create2009 So would the point of star grounding then be to avoid increasing resistance which other ways of grounding does?

@DaBears08 6 жыл бұрын

God I can't believe I'm about to take my strat apart....thanks for the info though.

@CG-sv2nw 4 жыл бұрын

Twisted pair is the same thing they do in cat 5e or cat 6, the cable used for Ethernet. This method works well👍

@gabegmusic8156 6 жыл бұрын

Great job. I just did this to my MiM Tele Deluxe. Works great. I hear no hum at all. It's beautiful.

@mikeymumblesreal 3 жыл бұрын

Excellent, easy to follow, sensible tips. I'll redo my Strat, thanks so much.

@johnroberts838 7 жыл бұрын

Once again thank you for your advice, twisting definitely works!

@nicholaswoolfenden5254 6 жыл бұрын

Kind of you to share knowledge. Many thanks mate.

@RickJando 6 жыл бұрын

I never could understand why people buy expensive fender guitars and having to put up with that dopey hum. Luckily my Les with it's mini humbuckers doesn't make that noise. This has been a very useful video thank you.

@nanaandbump. 7 жыл бұрын

Such an awesome explanation, thanks for this!

@goununo 7 жыл бұрын

Thanks. Simple, short and effective.

@roadapple66 6 жыл бұрын

I didn't see this, or hear you mention it, but I have had good luck with the black, conductive paint. I just paint the cavities, let it dry completely, and screw a ground wire into the cavities. If you covered it, then I apologize for missing it. I have used copper tape, aluminum tape, and the conductive paint to good effect on guitars with single coil pickups. Thanks for the video! the information is spot on.

@pierreandrerock Жыл бұрын

great thanks for your video now my telecaster dont gate any buzz you'r the best demo in youtube

@Giggiyygoo 3 жыл бұрын

I googled "why am I hearing a constant hum in my ears" and now this is in my recommend.

@unSTEVOED 3 жыл бұрын

Did you line the inside of your head with Foil??

@jasonjohnson4170 7 жыл бұрын

Love it! Very helpful. Thank you!

@glenngulia5409 4 жыл бұрын

Incredibly good video. THANKS!

@sirstashalot7441 6 жыл бұрын

This was very helpful. Thanks for this.

@johnroberts838 7 жыл бұрын

I used the twisting of the Pickup wires in my Telecaster Duncan Hot for Tele set without shielding, NO HUM, sensational, thank you so much, best technique, no messy copper shielding .

@create2009 6 жыл бұрын

Glad it worked for you!

@divisonlapse 2 жыл бұрын

Just did that! Wow what difference. Thanks

@Kikutuca 4 жыл бұрын

Thanks for share your time and knowledge.

@PhoenixRover 8 жыл бұрын

Very helpful! Thanks a bunch.

@Groosome128 7 жыл бұрын

A before sample would have been good for comparison.

@conallowry9664 6 жыл бұрын

Groosome128 That's what I was thinking

@voteZDLR 6 жыл бұрын

Yeah well... if you have a guitar that hums then you probably already know what the 60 cycle sounds like. I imagine that's how we all got here cause we're looking for a solution to this problem. BUT all being said I will at least agree that a before/after comparison would've been nice, at the very least.

@bilbobaggins2083 6 жыл бұрын

Exactly.

@voteZDLR 4 жыл бұрын

@@dejfcold Yeah... is it like a single coil strat or something? It could need to have like copper sheeting laid on the inside by all the electronics inside the guitar. For some reason single coil pickups on Mexican made stratocasters, especially (or cheap ones, anyway) are effected by this. In fact, the "hum" used to be something guitar players had no choice but to get used to, in some cases, that's why they invented the HUMbuckers.

@onzkicg 4 жыл бұрын

Ooops moment. We live in a rush generation. It’s good that hum and buzz is very familiar sound to all.

@GuitarGangsta 6 жыл бұрын

wow, a guitar project i did and it actually worked !!! thank you !

@74dartman13 6 жыл бұрын

A lot of people have been saying the aluminum tape doesn't conduct between pieces . I use it and it works fine. Also I've been making cigar box guitars. I've cut the pickup leads short and used shielded cable to wire everything. In those I haven't even needed to use any tape and they're very quiet! I think the shielded cable really helps a lot!

@telestrat7184 7 жыл бұрын

My brand new tele was humming so bad even with copper foil sheets that i have installed previously. After i saw your video, i opened up my guitar, twisted the pickup wires, added ground wire to the bridge pickup cavity, put everything back together and ...Voila! Hum is gone. Thank you!

@create2009 6 жыл бұрын

Awesome! I'm so glad this is helping people!

@semilivesixstringstrumist5595 6 жыл бұрын

I picked up a couple tips. Thank you buddy.

@seanszoch1071 7 жыл бұрын

thanks! you have a gift of teaching

@hoofhearted7445 7 жыл бұрын

Best stick man ever!!! thanks for the info

@ThomasClark123 7 жыл бұрын

So why don't guitar builders do this during assembly???

@davidhaney1394 7 жыл бұрын

money

@semilivesixstringstrumist5595 6 жыл бұрын

Small builders do. Its the big corp. that don't. It cost them money. Its about mass production with as little cost as possible. All corp. suck! No matter what they make.

@andreil1234 6 жыл бұрын

During the fifteen-minute assembly for a Squier Bullet or during the five hour long assembly for a Custom Shop Strat? :)

@subscribetobanbasstabs2599 5 жыл бұрын

they do

@lulumanus9025 5 жыл бұрын

They do on the expensive custom shop stuff. Worked like a charm for me.

@bilbobaggins2083 6 жыл бұрын

Simply Brilliant! Thanks

@petercummins1097 4 жыл бұрын

Really informative video, thanks. Just winding if you need a ground wire from each cavity if the scratch plate connects them all. Could you just connect the control cavity to ground?

@SaurabhVerma-vm9dc 4 жыл бұрын

This works like a charm. Had a noisy fender start 50s series. not anymore. Thanks :)

@randy4210 5 жыл бұрын

Thank-You! I will be doing this!

@towipo 7 жыл бұрын

I KNEW IT! Had two different "experts" tell me there is no polarity on the wires. I even told them yes there is, black is the ground. Thanks, man.

@create2009 6 жыл бұрын

Well, they're right and they're not right. They're either just clouding their ignorance by confusing you or they're trying to make you feel dumb. In truth, there IS polarity on the wires, but it changes as fast as the string is vibrating...so you can't really label one or the other as positive or negative because this flips many times a second. It gets even weirder once you start to realize that it's really just electrons moving around and there's no such thing as "positive." If we accept this, we can't label any of the wires and suddenly we can't work on our guitars without an EE degree. To make this easier engineers have invented an imaginary condition called "ground." We find a spot in the circuit, we call that point "ground" and we imagine that this point is zero volts. Then we can compare every other point in the circuit to "ground" and say everything else is either more positive or more negative. In the guitar's case we say that black is "ground" and that white is "signal"...which... gets bastardized into "positive" and "negative" because we all grew up putting DC batteries into our Game Boys. Really what's important is that we can keep up with what is going on without a lot of effort. We don't want to get our pickups out of phase and we want all of our metal shielding to stay on one side of the circuit all the way back to the power station so nobody gets shocked! We want to be able to define our problems as "signal problems" or "ground problems." So yes. To the masochist, there is no polarity. To the sane (and anxiety free), there is. Good question

@jjohnston73 8 жыл бұрын

Great job explaining riot causes and solutions.

@create2009 7 жыл бұрын

Thanks!

@PISSEDOFF-MADABOUTIT60 3 жыл бұрын

Great work easy to understand and I now know that I can use foil to save money.

@CastlesMadeOf... 6 жыл бұрын

Really interesting- thanks man!

@ephraim.1964 5 жыл бұрын

This is just awesome! Can any of the potentiometers be used to do the grounding or just one in particular? Thanks!!

@goswo 4 жыл бұрын

Really really well explained. Thanks :-)

@rowdyhoo 3 жыл бұрын

Good informative video!

@mikepins 6 жыл бұрын

Great explanation! Thanks.. dead silent after done this shielding and twisted the wire, but i got some humm when i slightly turn down the volume pot.. is this a normal or i did a mistake?

@GlitchyBastard 8 жыл бұрын

Love your videos, and happy to be your No.95 Subscriber! Try using a directional microphone in the future, it'll give your audio quality a big boost! Good work! Keep it up!

@create2009 8 жыл бұрын

Thanks! Yeah, we're working on our audio. I have a directional mic but it quit working and I just bought another one. Thanks for the encouragement!

@GlitchyBastard 8 жыл бұрын

Create! ;-)

@BruceLyeg 6 жыл бұрын

Thanks! I now know what my project will be this weekend!

@luke9771 5 жыл бұрын

I followed all these steps! I know close to nothing about guitar electronics, and I had this buzz I thought was incurable. Following this stuff completely got rid of the buzz! However, I didn't do the starfish grounding thing.

@TheOfficialGoomba 5 жыл бұрын

i have a mitchell guitar with some really shit hardware right now this is exactly what i need thank you.

@driftingmelodies 4 жыл бұрын

It's the best iv seen.. I have 2 questions ..where do all the ground wires meet I'm star grounding and you twist only the hot and ground wires of the pickups ,not two hot wires from the pickups?

@MrGavinspoppop 7 жыл бұрын

I just added some copper tape to the cavities in my Cort Strat .... and I did the underside of the pickguard .... it worked great !

@create2009 6 жыл бұрын

Great!

@clarefleet6956 6 жыл бұрын

The song is amazing

@6strings735 5 жыл бұрын

Excellent, thank you. (OK, I'm a retired electrical engineer like many others here it seems, love this stuff.)

@ioodyssey3740 4 жыл бұрын

And you don't know what a real ground loop is? WTF?

@TVguy9999 5 жыл бұрын

Great video!

@goodearthcustomconcepts2402 7 жыл бұрын

thank you buddy ,great info

@bobparsonsartist564 6 жыл бұрын

I looked at the wiring in my G&L Strat, which is very noisy, and what I have is very long parallel wiring, with the excess wire nicely bundled and tied with a zip tie. Thanks for the vid. I look forward to hearing the difference.

@marshallohio5512 3 жыл бұрын

My G&L Legacy same issue from factory! Not any more by this video suggestions! Cheers

@nelsonpaul72 6 жыл бұрын

Very well done video! I came across this because I've been playing guitar for many years and just recently took on the project of taking a low-cost used MIM Tele and upgrading the electronics. On my first attempt it has an incredible amount of buzz which I'm now certain is a grounding issue. I will follow the steps you've outlined here and see how it goes. If it goes well maybe I'll post a before and after. Thanks again.

@nelsonpaul72 6 жыл бұрын

Update: worked like a champ! No noise, no interference...just sweet tones from the new pickups. Thanks again.

@gerardoromano3436 9 ай бұрын

Great video!! , star grounding is very important to avoid ground loops, we are talking Milivolts here in a high impedance circuit, just like a radio. Keep uploading videos, really helps. Cheers :)

@jvin248 7 жыл бұрын

Good job. I'd add that you really want to use a shielded cable from the control cavity to the output jack. Twisting those two wires doesn't help like people think (or else all guitar cables would be inexpensive twisted pairs not woven shielded cables). $90 Epiphone Specials ship with shielded cable to the jack. My experiments have shown that shielded cable output wire cleans up about half a guitar's noise, the other half is all the cavity shielding. +1 on the aluminum shielding tape, I use that same roll.

@kdakan Жыл бұрын

That's nice to know, I was guessing the same thing, if twisting the wire worked to eliminate noise all guitars would be shipped that way. None of my guitars have twisted wires.

@VashStarwind 11 ай бұрын

Would adding foil around the output wire be good enough to shield it?

@francislalonde7843 3 жыл бұрын

Hi! Can I use the volume pot for the star grounding? Thanks and great video btw!

@DenisAhmet 5 жыл бұрын

This looks great and I will be trying it out. One question, what have you used under the black screws in the cavities - it's hard to see in the video, but it looks like a strip of metal, which then is connected to the ground wires. I think this is quite important?

@josesaldivar655 5 жыл бұрын

Thanks a lot. Can you put the sound with the humm before the fix ?

@MrKurtisp23 4 жыл бұрын

Gonna try some foil on my Electric Violin, I will let you know if it works!

@SidoMuntjul 7 жыл бұрын

awesome! Magic!!! like this!!!

@joseenciso9099 3 жыл бұрын

Awesome!!! Thanks!

@onzkicg 4 жыл бұрын

Will give this a try. thanks

@jeffhopper3526 5 жыл бұрын

Good job!

@IsmaelAngelus 4 ай бұрын

Awesome!

@fenderstrat7547 4 жыл бұрын

Great video very informative....

@mahngo07 4 жыл бұрын

This help me a lot Thank you :)

@SimonJosephStrat 7 жыл бұрын

Thanks mate it really helps god bless you

@sandrotartaglia8717 7 жыл бұрын

I learned why my DIY installation of Duncan Phat Cat pickups is so NOISY! I did everything wrong. Especially miles and miles of unnecessary wire that needs to be drastically cleaned up. Can’t wait to get to work on it. By the way, P-90’s make a Les Paul sound AMAZING!

@create2009 6 жыл бұрын

Yeah p-90's are great. If you installed humbuckers and still have significant noise, this video should cure it.

@JLchevz 4 жыл бұрын

best video ever, thanks, this is something I can do myself right? with care

@infinity-mi365 6 жыл бұрын

Thanks for this !! In the middle of a Telecaster build and i'm learning about ground hum. Loved your theory explanations. The whole process has made more sense now. Just wondered though if twisting the ground and signal wires would although kill the hum, it would reduce the output signal too?

@gerardoromano3436 9 ай бұрын

No, It doesnt. Justo helps kill unwanted noise.