I'm convinced that yarn is superior to foam. Foam is very fragile and breaks easily and is harder to position. The cassette felt is a great tip. Foam for light seals is eventually going to rot again but cotton yarn will last forever, just ask any Egyptian mummy :) Great job on the video.
@gavinjenkins8997 ай бұрын
Mummy wrappings were soaked in resins and glues of all sorts, it's more like weak fiberglass.
@poppoppaoo87415 жыл бұрын
I just got my film rolls back from being developed & I got some light leaks on them. Mostly red and yellow colored leaks. Very timely yung video ninyo. Thank you! Btw the screwdriver set is available at Daiso for only 88php 😅
@ThirtyFiveStudio5 жыл бұрын
Pauline Estola yes I got this from Daiso. Hehe. Good luck on your repair! 😃
@pearlaton5 жыл бұрын
Just in time! I have the light leak issue with my AE-1. This will totally help me :) Thanks guys!
@ThirtyFiveStudio5 жыл бұрын
Tell us how it goes! Good luck on your repair! :)
@obelxo5 жыл бұрын
Hello! I was wondering how well this holds up and could you possibly upload some pictures using this method?
@jamesmartz47553 жыл бұрын
Good tips! Can't believe it never occurred to me to just take the fabric from a film canister.
@sk337sk3372 жыл бұрын
This worked perfectly, fixed the light leaks in my Olympus 35sp, thanks brotha
@fadime17265 жыл бұрын
Super easy to follow, thanks guys!
@ThirtyFiveStudio5 жыл бұрын
fadime thank you!
@vanrutgar65362 жыл бұрын
Use electricians black tape on outside edges ...simple .
@richardsilva-spokane34363 жыл бұрын
New sub today. Excellent video! Very helpful! Thanks!!!!! ♥️
@joanmichel5 жыл бұрын
Very interesting technique man
@ThirtyFiveStudio5 жыл бұрын
Thanks, Joan!
@jgeezer3 жыл бұрын
What about the light leaks coming from the front end of the camera ?
@bernardocuesta42172 жыл бұрын
i need the same
@ShauntelAngelica4 жыл бұрын
the exact video I needed! thank you
@homestudiohero Жыл бұрын
Super helpful!!
@Benji434205 жыл бұрын
Hello! Can you give me a pieces of information about the white leaks? I have a Praktica VLC2 and many pics what I've shot have these white leaks. That's so frustrating. What can causes this problem?
@ThirtyFiveStudio5 жыл бұрын
Hi! White leaks usually come from the front of the camera (lens side). I’m not familiar with that exact camera, but the usual culprit for white light leaks is the shutter curtain. Check if it has any tears or holes. 🙂
@Benji434205 жыл бұрын
@@ThirtyFiveStudio Oh, sounds interesting. Thank you for your reply!
@bublt4me2 жыл бұрын
IMO, I'd never use super glue. Once it's set, that's it. Dissolving it will be a pain in the ass. I would use contact cement instead.
@hubertremiendo35332 жыл бұрын
How about white leaks huhu
@sfv65 жыл бұрын
I just did mine, i used a thin foam sheet with adhesive in the back. Its cost like 1.50
@billem162 жыл бұрын
where did you buy it from? i need that too
@sfv62 жыл бұрын
@@billem16 any arts and crafts stores. Hobby lobby, Michael’s etc.