Fix The Vac Then Fix The Mess - Welker Farms Inc
Рет қаралды 484,051
5 жыл бұрынMade a small mess while loading a bin. The grain vacuum is the best way to pick up grain on the ground. Just a little maintenence on the vac and its good to go.
For more Welker Farms Inc updates and pictures- Follow us on social media where we post daily farm updates!
---Check out our website:
www.welkerfarms.com
---Subscribe to our KZfaq channel:
/ welkerfarmsinc
---Follow Welker Farms Inc on Facebook:
/ welkerfarmsinc
---Follow Welker Farms Inc on Instagram:
/ welkerfarmsinc
---Follow Welker Farms Inc on Twitter:
/ welkerfarmsinc
For merchandise (caps, shirts, hoodies) email us at welkerfarmsinc@gmail.com and we can get you setup from there!
@LiIAxe 5 жыл бұрын
Lol grease, “This one, This one, this one...” lol nice one
@markmortensen4341 5 жыл бұрын
Always interesting to see what you guys are up to. Glad you didn't forget about us😂😂😂‼️ Thanks again for sharing.
@bborkzilla 5 жыл бұрын
As my grandma used to say: "Grease is cheaper than metal."
@FarmingFixingFabricating 5 жыл бұрын
This one, that one, this one and that one and this one.... Had me cracking up.
@toyotahiace4515 5 жыл бұрын
So well done to
@kleinerbub84 5 жыл бұрын
all the zercs, but not the new chain... well :D
@stevenmcdonald2750 5 жыл бұрын
Most new chains come pre-lubricated, so it shouldn't be done at installation.
@raincoast9010 5 жыл бұрын
@@stevenmcdonald2750 that was my thought as well.
@fortniteking706 5 жыл бұрын
litarelry had me in tears
@thedonleroy 5 жыл бұрын
Boy that works slick. We could have used that last fall when we found our dry bin for corn was smaller than we thought & we spilled 30 bushels or so on the ground before we got back to the yard & switched the dryer over to another bin. We had to shovel it by hand. Thanks for the video.
@c5back9 5 жыл бұрын
Sept 13th and the harvest is done? Down here in southern Pennsylvania we’re just getting a groove going! What a difference 500 or 600 miles in latitude makes.
@jordanperson3126 5 жыл бұрын
We Turned the pump up in our 4320 and would always run hot. We put a bigger radiator in it. It's good now.
@caleblee1130 5 жыл бұрын
I love the grease fitting jump cuts. Funny stuff. Keep up the good work.
@JoshuaMorgan 5 жыл бұрын
That was absolutely fascinating! Thanks for all the explanation.
@Reaper7420x 5 жыл бұрын
Keep it up Welker! I'm enjoying it all. Definitely keeps the mind clear
@sneakysnake109 5 жыл бұрын
Very nice, a little bit of everything. Made the video interesting and enjoyable. Thanks for sharing!
@MrClydeclyde 5 жыл бұрын
Great vids Nick ,I love to watch your farm operation.
@SoybeanFarmer3300 5 жыл бұрын
my 1970 year model 4020 is my work horse here on my little farm. I really liked seeing the tractor connected to the vac.
@charliegonzales1404 5 жыл бұрын
That is a nifty little gadget. 👍👍 2 thumbs up.
@Avocadomushroom 4 жыл бұрын
Learn something new everyday. I love your videos
@Alexanderbuilds2001 5 жыл бұрын
Working on a farm is just a beautiful setting
@treytonzoss1853 5 жыл бұрын
Wow! Incredibly innovative vacuum!
@constins31 5 жыл бұрын
hello from tasmania australia, keep up with the great videos and live streams. i enjoy watching them 👍
@ruairchanrahan1350 5 жыл бұрын
Well I watch a lot of KZfaq farming vids the likes a onelonelyfarmer lordmuck deano0303 George saunders and the like and I honestly believe your channel is the best. No other channel is as real and straight with their repairs and custom builds and above all else you guys are always optimistic and smiling. Nick keep making classy vids and live streams. You and leg arms are legends✌️
@user-zu2bw7ig5v 5 жыл бұрын
Nice vid. I ran a 4020 real similar to your 4520 with a power shift when I was young on the farm. Coming at ya from northern wi grew up in sd have a good one.
@boerbrabant 5 жыл бұрын
I like these vids you really should do lots more. The edited timelapses and harvest vids are a lot of work so these are great. Like how you did the grease montage:)
@mwnciboo 5 жыл бұрын
I like the bit where you smashed the chain with an 'ammer! Agricultural engineering baby! This channel is friggin epic, during harvest i had your casts on whilst on the train, in the garden, playing farming simulator with my boy...love it. "Put welker on daddy..." "Okey dokey".
@mussellnz8640 5 жыл бұрын
this one that one has to b the funniest thing iv sean all week made my hole week thaks bro👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻😘😘
@hillbillypetej 5 жыл бұрын
Video editing at its best Thanks nick just love your videos so much and live stream please don't give it up love the ending with thunder awsome on my Tv❤️
@b2lee2 4 жыл бұрын
I just love your videos. God Bless
@SCF.8485_6 5 жыл бұрын
Great video! Very well done!
@maineman11 5 жыл бұрын
Great video. Thanks for the upload.
@BillyRillkratz 5 жыл бұрын
I Really like your Videos and live Streams, for me so entertaining and educational. thanks!
@lucascrestani7166 5 жыл бұрын
Great video Nick! Record more videos of the big Bud tractors working, that would be really cool
@ROB_DJOREOYT 5 жыл бұрын
Nice sound awwww it makes me feel great
@bigt6359 5 жыл бұрын
Great video...I really like your work!
@saltycowgirl 5 жыл бұрын
Amazing, I didn’t think you guys new how to vacume... lol
@kameronouellet9132 5 жыл бұрын
Hi best farming channel ever
@mrbill4187 5 жыл бұрын
Glad to see im not the only one who gets my moneys worth out of parts before there replaced. Lol
@augustreil 5 жыл бұрын
Rollin Coal baby !!!
@howardyounger5456 5 жыл бұрын
t hose vacs are nice when we would clean the wheat out of the steel building. i was a lot smaller operation but i used a fanning mill to clean my own wheat.it would do about 25 bushles an hour. it was a long time ago. what motor was in the 7700 was it not the 404. those 20 series tractors where tough . but the controls where in bad places. loved the video.
@eraaspr1 5 жыл бұрын
Nice sound to that tractor. I would like to see/hear something like that in farmsim aswell. Thanks for making great videos. I've been watching all your livestreams after you finished harvest Keep it up and have a good day.
@WelkerFarms 5 жыл бұрын
Thanks for watching!
@dargaming379 5 жыл бұрын
A 4520 would be awesome in farm sim
@chicknchili 5 жыл бұрын
Good video .KEEP EM COMING👍👍👍👍👏
@Len_M. 5 жыл бұрын
I remember when I was a small kid my Uncle bought a 7720. That was a nice looking Combine.
@singletreefarm3617 5 жыл бұрын
Loved the greasing part
@heavyhauler79 5 жыл бұрын
I always love the way that engine started in the John Deere similar to a 4850, but no turbo
@jeffyoung2089 5 жыл бұрын
Enjoyed the video!
@johndowe7003 5 жыл бұрын
love how youre the only guy on youtube not trying to sell us a stupid electric gun. old handy never breaks and wont let ya down lol
@TheFarmingLife 5 жыл бұрын
Thanks for the video cleanups are always fun
@AquariumMania 5 жыл бұрын
Reminds me of when I worked as a mechanic for this local sewer/pipeline cleaning company, Vactor trucks are great pieces of equipment, this little vacuum trailer is pretty sick.
@1towmater1 4 жыл бұрын
What you need is a chain breaker. I've been using one for decades, clamp on chain, tighten handle an the link is split.... No grinding and hammering,$25 on Amazon
@dahlmasen3084 5 жыл бұрын
Love the greasing part😂
@aserta 5 жыл бұрын
You could put a taller rad, but on an oblique angle, with a rad box around it to isolate that space. Oh and totally invest in a chain pin popper, max 20 $ for the most quality one cheaper for the lesser ones, worth it. No more grinding, no more hammering. You just turn a wrench.
@LiIAxe 5 жыл бұрын
My cousins farm, we haven’t even started harvesting yet lol, almost (in Minnesota)
@Uneedhelp91 4 жыл бұрын
That is a nice tractor!
@andrewbergeron2427 5 жыл бұрын
great videos men miss our farm VT .USA 💐!!!
@firemanjay1472 4 жыл бұрын
You need to leave some grain- the birds and deer need to eat too!! great video again. Brings me back to my days on the farm.
@colebarrett4194 5 жыл бұрын
I have never seen a big bud before it looks really cool
@roymoses1945 5 жыл бұрын
11:34 Look at the detail on that chain! Beautiful!
@WelkerFarms 5 жыл бұрын
Chains are pretty cool!
@Black-yt8of 4 жыл бұрын
RoyMoses Giants Software really stepped up their graphics!
@thrill_house_gaming1006 5 жыл бұрын
That tracker sounds beatiful
@macdawg6403 5 жыл бұрын
hahaha.. The Grease fitting edit was funny!
@justthings6405 2 жыл бұрын
Nick is correct, that hose full of grain is a back breaker.. would be nice to have a remote controller so you don't have to physically lift that 2 ton hose around!
@garrettray3620 5 жыл бұрын
10:59 me show my mom all the home work I have from school
@johnnyboy830 5 жыл бұрын
Awesome video yet again from NIck. Hopefully FS19 puts in a grain vac in the game. Would help a lot working on silage bunkers to get the last remaining bit or a least get a manual shovel and load it yourself
@stevewebb1226 5 жыл бұрын
Keep the videos coming BROTHER
@WelkerFarms 5 жыл бұрын
Thanks! Will do!
@andrewmaas6620 5 жыл бұрын
I wish we had your weather it’s been in the upper 90s for the past week here
@ethanballenger3870 5 жыл бұрын
Like the vids keep it up
@laddhooks 5 жыл бұрын
"This will run for now." Haha. I know how that goes.
@hamensandhu585 5 жыл бұрын
Good job 👏👏👏👏👍👍👍👍👍
@komitadjie 5 жыл бұрын
Oh man, that would clean out my shop *so* fast!
@matwalker6336 5 жыл бұрын
there is just something about farming and logging where this attitude.... "that will do for now" prevails... why you would even waste your time to put that new chain on sprockets that worn out is beyond my comprehension... ya I know... you just gotta get working now... "that will be good enough for now".... always time to do it twice... NEVER enough time to do it right.... and your farm runs less this way than most others... you run a tight ship it is why I watch your vids... you get shit done and do it with brains. Keep at it... cheers.
@lorzon 5 жыл бұрын
Good video!
@jacobgannon8494 5 жыл бұрын
My favorite tractor is the 4020. My grandpa had two before he sold the farm and retired
@AJDeere 5 жыл бұрын
Thats a cool end screen
@Przemas_87 5 жыл бұрын
Super video :)
@fletcherhavens2051 5 жыл бұрын
I like that, that one and that one and this one 😂
@eintyp9201 5 жыл бұрын
you have nice machines
@nickpopelka 5 жыл бұрын
That works well dang
@dannypederson4054 5 жыл бұрын
Add a radiator on the very front we did that to our Oliver works great
@tiernanmcgonigle3397 5 жыл бұрын
11:20 the beautiful art of hitting it really hard
@codyludwig2811 5 жыл бұрын
A guy from Alberta has a invention for moving those heavy Hoses, Its called the Ultra Cart, Doesn't cost much not heavy can use it to move the hose around the bin or on the ground.
@waylonleach8887 5 жыл бұрын
Love you videos
@kylerifenberg2572 5 жыл бұрын
Great videos and amazing unique Fab jobs! I seen the F.D. shirt, wondering if you're on the local Dept also?
@keithmartin7831 5 жыл бұрын
Don't forget to order the cog with two broken teeth on grain vac👍👍👍👍
@clintonemmert5184 4 жыл бұрын
Hey you don’t have to worry about Mosquitoes 🦟 lol. Good video.
@flintoian7550 5 жыл бұрын
So that one lever pretty much acts like a power reverser lever similar to the new ones
@aaronhellhake5320 5 жыл бұрын
Awesome machine. I purchased a hat today after emailing Kathleen about it. Awesome channel. Makes me want to leave Spokane and go back home in South Dakota and try to get our old family farm up and going again.
@TheMetalButcher 5 жыл бұрын
15/16th gear wrench? Im jealous. Those are great.
@Wingman77tws 5 жыл бұрын
over greasing is a problem, and also introducing dirt by greasing is an issue. My Dad worked 20 years for a bearing manufacturer. they made the exact same bearing in a permanent seal, and grease fitting version. the permanent seal always lasted longer.
@randomroosterfarm 5 жыл бұрын
Fall is the best time :)
@tylerduchsherer5579 5 жыл бұрын
Need to get a chain cutter!
@JimsNBHomestead 5 жыл бұрын
Sprockets were definitely finished. Periodically remove your chains clean in solvent and soak in heated 90w gear oil...hot plate works great
@spencer1096 5 жыл бұрын
Sweet 4520 can you make a video of the old 7700 cobine
@nathananderson7319 5 жыл бұрын
so mr welker in total to tap the pin out of the chain joint is 35 whacks with the hammer and idk what youre holding to her the pin out but 35 whacks with the hammer to get it out
@doublebfarms2313 5 жыл бұрын
Our 3020 has a powershift in it and it works fine the only thing with the 3020 in that it has a bad oil leak in it
@muscletractorfan2441 5 жыл бұрын
Good video. I just saw a video of a 7700 combine. Interesting idea to swap in a combine engine. How long will this engine last until it needs to be replaced?
@brandoncalin8183 5 жыл бұрын
I think you missed a one. Lol And this one and this one and that one. 🤣🤣🤣🤣🤣
@HiztoryNDAmakin 5 жыл бұрын
summers gone??!! still 95+ here in colorado. might cool down next week
@133dave133 5 жыл бұрын
Will running the rack make it run like a 2 stroke Detroit? Just picking on you. Those injection pumps are finicky though. Love your videos!
@shawnfox8002 5 жыл бұрын
Makes for a easy clean up
@hughstephenson2957 3 жыл бұрын
I ran a lawn service briefly and had a customer in Burlington Wy. That had me use his grain vac to suck up leaves off his trees... Almost stole it and the H Farmall he used to power it!! (The H used to belong to me at one time)
@jimmy123272 5 жыл бұрын
Just curious, is this where the rocks came from that were plugging the seeder this spring?
@robfishpond3026 5 жыл бұрын
😂😂😂😂😂😂 and this one and that one and this one and that one etc. 😂😂😂😂 Laughed so hard at that 😂😂😂
@fayettefishingoutdoors8385 5 жыл бұрын
Very rare tractor. They made only 1600 of powershift 4520s probably one to take care if
@WelkerFarms 5 жыл бұрын
That is what I've Been Told, it's too bad we replaced the original engine. We still have the old block but it's been sitting outside. Tracker itself runs great but needs a little TLC to make it look pretty again. I would have had no idea that it was a rare tractor.
@boerbrabant 5 жыл бұрын
@@WelkerFarms it wasnt a rare case so not that bad😂
@clearingbaffles 4 жыл бұрын
I believe it a pilot bushing and a throwout bearing & we used relative bearing grease in the Navy. Does the 4520 have R-12 or R-134a Freon for the climate control system? Thanx from the left coast near the Krapitol of California
SmarterEveryDay
Рет қаралды 5 МЛН