Fix VR stutters in DCS and other titles - 3 things to do (incl. disabling Intel E-Cores)

  Рет қаралды 6,861

Esa Ahonen Simracing & Simflying

Esa Ahonen Simracing & Simflying

Күн бұрын

This video shows how to make 3 changes that can help with stutters on DCS and other flight sims and simracing titles. Before the E-Core change my DCS was totally unusable as it would drop to 1-10 fps. And same fix helped with eg. Dirt Rally 2 crashing to desktop at the end of every stage.
0:00 Intro
0:37 Exclude directories in Windows Defender
2:33 Intel E-Cores what are they?
3:28 E-Cores fix with Process Lasso
5:30 About performance
6:01 NVIDIA VR pre-rendered-frames setting

Пікірлер: 36
@AhSoul
@AhSoul 25 күн бұрын
In DCS the thing that finally fixed my stutters was setting the FPS limit to 300 (max) and making sure I wasn't trying to throttle to a target FPS in OpenXRToolkit overlay. Once I'd done that, all my stuttering vanished and it was silky smooth. This was after I'd done the other things this video mentions, so they're also valid.
@ahonensimracingsimflying
@ahonensimracingsimflying 23 күн бұрын
Haven't had that problem but I guess it's very much possible.
@TimoZSimulations
@TimoZSimulations 2 ай бұрын
I like the fact that he took his daughter Hostage at 6:00 to read the directions haha
@ahonensimracingsimflying
@ahonensimracingsimflying 2 ай бұрын
Hah 🙂 You can check the whole video from here: kzfaq.info/get/bejne/b9iihaaonMDXdZc.html
@StrongHarm
@StrongHarm 3 ай бұрын
In Process Lasso, you can see at 4:02 that some of your cores are grey. I believe that this means they're parked. There are applications you can use to unpark those cores so they can't idle for eco purposes. I think you can equate it to Chevy engines that shut down the 7th and 8th cylinders to make the engine more fuel efficient, but the downside is when you floor it there's a delay while the "parked" cylinders are reactivated to give you full power. Something to look into.
@ahonensimracingsimflying
@ahonensimracingsimflying 2 ай бұрын
This happens when you're alt-tabbed to Process Lasso for longer. I've never seen parked cores when DCS is actually running. But yeah, if you want to disable parking, there's a setting in Process Lasso called Induce Performance Mode, which prevents using E-Cores and parking. So far I've preferred the method shown on the video as I sometimes have DCS on the background when eg. setting up recording for videos.
@StrongHarm
@StrongHarm 2 ай бұрын
@@ahonensimracingsimflying Perhaps. This is what the Process Lasso FAQ says: If I have installed Process Lasso, do I also need ParkControl? ParkControl offers these additional functions: A real-time system tray icon showing CPU core parking status Easy access to CPU core parking settings Power profile change notifications People have reported that preventing parking on your cores has an even more visible effect than disabling Ecores. I've not had to use it myself, but if your cores are intermittently grey stopping the parking may be worth looking into.
@ahonensimracingsimflying
@ahonensimracingsimflying 2 ай бұрын
That exact spot from the FAQ you quoted begins with: "You do not need it [ParkControl], but you may choose to also have it installed." From the same FAQ: "If your system does have ‘open’ power profiles, use the Performance Mode of Process Lasso to disable CPU core parking when important applications are running. To do this, right-click on your target application’s process, then select ‘Induce Performance Mode’." But as I said, in my testing core parking has never been an issue when DCS is running. It only happens when it's at background and you're using some other, not performance hungry, software. And then it's actually the desired behaviour. If you find it causing problems, feel free to use any means you want to prevent it.
@TheD4VR0S
@TheD4VR0S 2 ай бұрын
Wouldn't power management have a maximum performance profile mode that would achieve the same thing ?
@ahonensimracingsimflying
@ahonensimracingsimflying 2 ай бұрын
I've found that PL's Power Profile "Bitsum Highest Performance" has a good effect on MSFS but in my testing I can't be sure of DCS. I don't say it isn't helpful but I don't make recommendations I can't be sure of.
@socratesg4210
@socratesg4210 3 ай бұрын
Just a tip, in Process Lasso, also change the Priority Class for DCS to high.
@ahonensimracingsimflying
@ahonensimracingsimflying 3 ай бұрын
I have tried it but did not get consistent results so I didn't recommend it.
@wabbit234
@wabbit234 2 ай бұрын
I prefer using ParkControl (from the same people who make Process Lasso), as you can just set it to "prefer performant processors" system wide. I haven't done extensive testing, but it totally rectified the way my system would just suddenly feel like a low end laptop when it decided to prioritize the e-cores and I just had to set it and forget it, no need to setup up each program individually. I think (but again not sure as I haven't done any real comparisons) it's advantageous as it's only setting an affinity for the P-cores, not disabling them, so programs can still use the e-cores for the less demanding stuff.
@ahonensimracingsimflying
@ahonensimracingsimflying 2 ай бұрын
Yeah, both ProcessLasso and ParkControl feature similar ways of control. I presented here the way to do it with PL.
@Dirk2006Neu
@Dirk2006Neu 3 ай бұрын
Hallo, are I am right when i say that I can do this with the Windows-Taskmanager too? What is the advantage of Process Lasso Pro? Thank you for the Video, i will try it on my System/PC. 👍🙂
@ahonensimracingsimflying
@ahonensimracingsimflying 3 ай бұрын
You have pretty similar processor affinity menu in the Task Manager. But 1) it doesn't show you E-Cores and P-Cores separately, it just shows them all as a list and 2) AFAIK the changes made there are not persistent and you really don't want to do this every time you run DCS/some other sim. So that's why Process Lasso.
@Dirk2006Neu
@Dirk2006Neu 3 ай бұрын
@@ahonensimracingsimflying O.K. Thank you for this Update-Info. 👍
@tj0cktj0ck
@tj0cktj0ck Ай бұрын
Thanks for the video. Do you need to have process lasso on and running every time you play dcs, or just do this and then never need to run process lasso again? I have a 14900k, quest 3 open xr, and I randomly get 1-2 fps for like 30 secs to 1 minute. Could be in the main menu or when flying. Just very random, and very annoying. Im guessing the e-cores are the problem? Thanks
@ahonensimracingsimflying
@ahonensimracingsimflying Ай бұрын
Sounds a lot like E-Core problem. You can have PL running at background all the time so it can change the settings according to what application is running. PL's performance cost on my system is practically zero.
@tj0cktj0ck
@tj0cktj0ck Ай бұрын
@@ahonensimracingsimflying ok thanks. Ill try it out later tonight. But do you need to have process lasso on and running every time you play dcs, or just do this and then never need to run process lasso again?
@ahonensimracingsimflying
@ahonensimracingsimflying Ай бұрын
@@tj0cktj0ck As I said have it running all the time. There's an option to start it up automatically with Windows.
@tj0cktj0ck
@tj0cktj0ck Ай бұрын
@@ahonensimracingsimflying ah I'm stupid and didn't understand PL was process lasso lol. thanks
@ahonensimracingsimflying
@ahonensimracingsimflying Ай бұрын
@@tj0cktj0ck No problem 🙂
@aitor47
@aitor47 3 ай бұрын
Thanks for the video, it helps with the stutters. One question though. You select PCores for DCS and Oculus? And the Ecores for all the rest active processes?
@ahonensimracingsimflying
@ahonensimracingsimflying 3 ай бұрын
Yeah, just disable E-Cores for DCS and Oculus. Let the rest be as they are. I have been experimenting restricting number of P-Cores to 8 for older sims like RBR. I think it might help with random crashes but I can't say for sure yet.
@aitor47
@aitor47 3 ай бұрын
@@ahonensimracingsimflying thanks mate. Much appreciated. I just started to experiment with process lasso and it does help. I'll try to enable pcores for dcs and oculus later today. Yeah man... So many hours of trial and error
@ahonensimracingsimflying
@ahonensimracingsimflying 3 ай бұрын
By default both P-Cores and E-Cores should be enabled. And you just want to disable E-Cores.
@aitor47
@aitor47 3 ай бұрын
@@ahonensimracingsimflying understood! 👍
@redtailpilot
@redtailpilot 3 ай бұрын
I disabled my E cores in bios awhile ago, but maybe I should do it this way. I've been using PL to stop windows update from launching automatically, which is the only way that works consistently for me.
@ahonensimracingsimflying
@ahonensimracingsimflying 3 ай бұрын
I haven't heard that the BIOS way would cause anything bad at least on a PC that's dedicated to sims. If you're also using stuff like Adobe software that have lots of background processes I believe it can make a difference. I was using my old PC for lots of other stuff than simracing and I just had scripts to shut down everything unnecessary when using sims.
@redtailpilot
@redtailpilot 3 ай бұрын
​@ahonensimracingsimflying OH that's good. Yeah I built this PC exclusively for flight simulators and a few games, so I should be good. Which is also why I did away with windows defender a little more than a year ago with no issues 😅
@ahonensimracingsimflying
@ahonensimracingsimflying 3 ай бұрын
Yeah, I've so far dealt with it by using the exclusions mentioned in the video.
@zaelu
@zaelu 2 күн бұрын
I disabled e cores without any problems
@ahonensimracingsimflying
@ahonensimracingsimflying Күн бұрын
👍
The MAGIC FIX For Better Performance in DCS World 2.9!
11:00
Spudknocker
Рет қаралды 49 М.
Super gymnastics 😍🫣
00:15
Lexa_Merin
Рет қаралды 18 МЛН
100😭🎉 #thankyou
00:28
はじめしゃちょー(hajime)
Рет қаралды 56 МЛН
How I Resolved my VRAM Overflow Issues in DCS World
17:22
Jabbers
Рет қаралды 16 М.
DCS VR Multiplayer Settings Guide | Quest 3 | 2024
10:56
laubox
Рет қаралды 11 М.
DCS VR Hand Tracking is the Future! - Quest 3
5:46
laubox
Рет қаралды 23 М.
DCS Meta Quest3 Hand Tracking Tutorial
8:02
Mnemonic Flies DCS
Рет қаралды 10 М.
Landing & Shutdown Tutorial for the F-4E Phantom by Heatblur in DCS World
14:16
Reflected Simulations
Рет қаралды 36 М.
Талдың үстіне үй соқтым!!! (Scrap Mechanic)
41:36