Fix Water Shut-Off Valve by Replacing Stem Valve for Savings: STEP BY STEP

Рет қаралды 57,772

Күн бұрын

Is your water shut off not working properly. At first, you may think to replace, but, how about repair it? In this video, we are rebuilding a water shutoff by replacing the stem valve.
🔩 Materials Used:
- Plastic Stem Repair Kit :amzn.to/3RatbRW
- Brass Stem Repair Kit (Upgrade Option): amzn.to/3R8IASF
- Valve Handle: amzn.to/3Gfdhz6
🧰 Tools Used:
- 6" Adjustable Wrench: amzn.to/3RaLE0L
- 6" Channel Locks: amzn.to/3QQde1L
- Screwdriver Phillips and Flat Head: amzn.to/46qe8b7
- Rags and Catch Bucket
Disclaimer: The DIY Plumbing Guy videos are created for informational and entertainment purposes. Viewers engaging in DIY projects do so at their own risk, and DIY Plumbing Guy is not responsible for any resulting damage. In case of complex plumbing issues, it is recommended to contact a professional plumber in your local area. Additionally, please be aware that the content may include affiliate links, and the DIY Plumbing Guy may earn a commission from any purchases made through those links. It is the viewer's responsibility to comply with laws, safety regulations, and to make informed decisions when using affiliate links.

Пікірлер: 111

@ernestTbass12 Ай бұрын

Dude ...Had a leaky valve. Watched several videos showing me how to replace the whole shemozzle. Found your video...solved my problem in 15 minutes and for $5. You are a Rock Star!!!

@DIYPlumbingGuy Ай бұрын

Wow!! good stuff ... thanks!

@keithlarson4113 Ай бұрын

Same here. 100% on point

@thlu308 5 күн бұрын

Same here. I did not know such part existed. I could not remove the compression ring and was about to give up and call a plumber. You saved me time, money, and sanity. Thank you Carlos!

@cpnoboat7659 4 ай бұрын

I found your channel today, and have to subscribe, because your videos go straight to the point, and explanations are clear and concise. Thanks so much for sharing your knowledge!

@DIYPlumbingGuy 3 ай бұрын

Appreciate the feedback… it’s viewers like yourself that makes creating content fun and enjoyable…. Thanks for watching!!!

@lylrys 2 ай бұрын

This saved my day! I couldn’t get the valve off and this is way easier to replace than the whole thing. Thank you!

@DIYPlumbingGuy 2 ай бұрын

Wow… I’m glad this worked for you… yes! Sometimes we just need few parts to repair and don’t need to replace anything.

@diyhvacguy 10 ай бұрын

Really nice job man! I learned something new

@DIYPlumbingGuy 10 ай бұрын

Hey buddy! Thanks for watching… Your channel is kicking ass! Good stuff!

@cenjim 7 ай бұрын

Great demonstration. Thanks!

@DIYPlumbingGuy 7 ай бұрын

You're welcome! I'm glad you found the demonstration helpful. 😊🔧

@user-gc9zm7yx7m 4 ай бұрын

Excellent Video....Any time you are going to replace the supply line to a sink or toilet, you should have a stem repair kit or new stop on hand. A stop that has never leaked before may very well start leaking because old brittle seals were trashed merely by closing and opening the stop one time to make a repair. I like the new seals versus new stop.

@DIYPlumbingGuy 3 ай бұрын

Exactly, it’s one of those things, once you touch it many things can go wrong. Great idea! 💡

@ianmurphey 3 ай бұрын

You might consider a second wrench on the valve body to keep it from rotating/leaking when loosening the nut.

@DIYPlumbingGuy 2 ай бұрын

For sure! Great tip!

@eileencarrello9550 5 ай бұрын

Best video I have seen on this topic. Perfect explanation.

@DIYPlumbingGuy 5 ай бұрын

I'm thrilled to hear that you found the video helpful! Thanks for watching and supporting the channel! 🛠️👍😊

@michaeledge9028 2 ай бұрын

You are fantastic, your video was so easy to understand . I fixed my problem in 15 minutes, thanks to you . Keep up the good work.

@DIYPlumbingGuy 2 ай бұрын

Nice!! way to go....

@shaharris-bogen449 9 ай бұрын

Thanks for saving my day!

@DIYPlumbingGuy 9 ай бұрын

You're very welcome! I'm thrilled to hear that the video helped save your day. If you have any more questions or want to share your experiences, feel free to do so. Happy to help! 😄🔧👍

@randysmith2827 6 ай бұрын

Thank for the easy tutorial-very helpful

@DIYPlumbingGuy 5 ай бұрын

You're welcome! Glad you found the tutorial helpful! 😊🛠️

@ggsholdings7225 Ай бұрын

You are a blessing, bro! I just fixed my valve due to your video easy!

@DIYPlumbingGuy 23 күн бұрын

Awesome man!! Thanks for the comment.

@bobcarrigan1742 8 ай бұрын

Thanks for this info, quite useful!

@DIYPlumbingGuy 8 ай бұрын

Thanks for the feedback. I am working on making them better each time. Thanks for supporting the channel. 😄👍📺

@rodgerrabbit2955 3 ай бұрын

Good job, my friend. You gave me another weapon in my arsenal to make money 💰 🤑 💸

@DIYPlumbingGuy 2 ай бұрын

Got get them!!! Thanks for watching

@bryanreese907 Ай бұрын

😄Great explanation. Clear instructions and easy to follow. Thank you.

@DIYPlumbingGuy 23 күн бұрын

Glad it was helpful!

@LAWNandORDERTexas Ай бұрын

Thank you! I’m a master in the lawn, but plumbing, that’s a whole other level :)

@DIYPlumbingGuy 23 күн бұрын

Hahaha. Well we learn something everyday. Thanks for watching.

@jamespatrick2956 Ай бұрын

Very helpful for a quick repair for an old corroded pipe thread valve that is too close to the wall to easily remove the old valve body. Ace or a good plumbers supply may have the kit. Big box stores typically don’t stock repair kits, usually new valves only.

@DIYPlumbingGuy 23 күн бұрын

Yes, I see this less and less in the big box stores.

@AlaninUSA66 3 ай бұрын

Thanks, I was worried about removing entire valve and busting it from pipe, this is much easier, less risk!

@DIYPlumbingGuy 3 ай бұрын

Awesome!! 👏

@tracyjel 5 ай бұрын

This was very easy to follow and it all went well. But tank still fills very slowly, so I think I need a new float valve. And I learned something and built a little confidence.

@DIYPlumbingGuy 5 ай бұрын

Great to hear that the tutorial was easy to follow and things went well!. It's awesome that you learned something and gained confidence through the process. Keep up the good work! 🚽🔧👏

@wlopez9974 Ай бұрын

Thank you, brother, you are the best!!!

@DIYPlumbingGuy 23 күн бұрын

Oh man!! I’m glad it helped.

@628robair 26 күн бұрын

Thank you. Helped me so much.

@DIYPlumbingGuy 23 күн бұрын

Awesome!!!👏

@richardkistner5549 Ай бұрын

Thank you..have a blessed day

@DIYPlumbingGuy 23 күн бұрын

You too. Thanks for watching.

@signalsoldier 26 күн бұрын

You're the man!! Thanks so much

@DIYPlumbingGuy 23 күн бұрын

Happy to help!

@yamato7979 Ай бұрын

Thanks for helping

@DIYPlumbingGuy Ай бұрын

Happy to help

@sunlite9759 2 ай бұрын

Stem broke easily when I tried to shut off water supply to take. Thanks for instructions on how to replace it.

@DIYPlumbingGuy 2 ай бұрын

Cool!! I'm glad it helped.

@alekmartin9999 5 ай бұрын

Excellent to use repair kit..the other option is to replace with the 00 washer for the shut off valve. Best to reduce unnecessary wastage with needless landfills also time and money's

@DIYPlumbingGuy 5 ай бұрын

Great point. I do have in mind making a video in the future showings all options and pros and cons for each, like cost and waste... Thanks for watching!!!👍😀

@user-ec3my1cx9p 4 ай бұрын

Perfect and I am normally NOT a handyman.

@DIYPlumbingGuy 3 ай бұрын

Great! I love when it works out…

@nenwaguan 2 ай бұрын

Number one!❤😂🎉

@DIYPlumbingGuy 2 ай бұрын

Thank you!!

@daveh4817 Ай бұрын

I was very excited to see this video, since I didn't know what I needed until I saw it. I just ran to the store and grabbed the replacement part. I just discovered that the washer at the end of the original stem had broken off inside the valve, so that was fun getting that out. Only to find that the threads on the replacement stem don't match my hardware. Old valve, maybe when there was a different standard in the 60's? Is there even a standard? I really hate plumbing. I did manage to get the old stem back in with no leaks with the valve open, so at least I'm happy about that. Need a plan B in getting new faucet and supply lines installed. Hmmm

@DIYPlumbingGuy Ай бұрын

Hey! Thanks for watching…. I have a video on my channel on how to replace this, it’s really easy and diy friendly. Good luck

@jonathanfenno1460 Ай бұрын

Thanks. Have ready a couple of small containers rather than rags, just in case ....

@DIYPlumbingGuy Ай бұрын

Yes! Just in case 😊… never know

@tomk9894 29 күн бұрын

Thanks, saved me $150 to have the valve replaced. I just need to cut the water to the toilet. $3.59 and a little gas.

@DIYPlumbingGuy 29 күн бұрын

I love these stories!!

@ericgrant9437 2 ай бұрын

Super helpful! Thanks. Is the replacement stem repair kit universal or is it specifically for BrassCraft?

@DIYPlumbingGuy 2 ай бұрын

Yes they are.

@billwallace1334 Ай бұрын

I liked your video very much, but I have a few things to add. You should say that the stem "screws" out. I was pulling on it for a little while before I realized this. Also, remind people to remove the old washer from the retention nut. Some people might not notice this or try to reuse the old one. Lastly, my old handle from 1986 did not fit the new stem. Tell people they might want to save themselves a trip back to the hardware store by spending a little more by buying a new handle too.

@DIYPlumbingGuy Ай бұрын

Oh! Thank you so much for the feedback… I’m sure I’ll do more of these and for sure will hit those points… thanks again!!!

@ScubaCat3 10 ай бұрын

the brass stem is really better than the plastic one. all you need is a new "00" washer

@DIYPlumbingGuy 10 ай бұрын

You've hit the nail on the head! 🛠️ I'm with you on the brass preference - it's got that durability factor we all appreciate. My aim was to provide a budget-friendly option for everyone to give it a shot. Your point is spot-on, though, and I'll definitely update the description to include the brass stem choice for those who prefer it. It's all about options, right? Funny enough, plastic stems seem to be having a party at my local hardware store! 🎉 Thanks for sharing your insights and helping make the community even better. 🙌

@ScubaCat3 10 ай бұрын

@@DIYPlumbingGuy yup, good video either way! 👍

@DIYPlumbingGuy 10 ай бұрын

Thanks, I really appreciate the support.

@MaMa-qh4dy 9 ай бұрын

I have replaced only the 00 washer on these plastic stems. Never a problem, and the plastic will never corrode!

@Thiser9 2 ай бұрын

Is there any benefit to keeping the older, metal shut off valve and just stealing/replacing the new rubber washers? (Wondering about the longevity of the new plastic valves versus the older metal valves)? Thanks!

@DIYPlumbingGuy 2 ай бұрын

Metal “guts” are definitely more robust. They do sell them but it’s harder to find. This is just another item in our home that forever it will need maintenance.

@VideosbySteve Ай бұрын

Can i buy just the rentention nut? Mine is rounded out, slightly leaking and the little screw that holds the valve handle cant be unscrewed with a screwdriver because someone mangled it.

@DIYPlumbingGuy Ай бұрын

I have not see just the retention nut. Maybe at this point is best to buy a replacement unit, pull out the retention nut and use here. Good luck!

@CalPUrnia-em6xk 4 ай бұрын

The first part of this video looks identical to my situation but at 53 seconds after unscrewing the handle and removing the retention nut I discover a smooth metal dome securing the old valve stem in place. Do you know what that is? Is it removable by DIY?

@DIYPlumbingGuy 3 ай бұрын

Wait… is it’s multi turn valve like the one in the video or a quarter turn valve? A quarter turn valve is not serviceable, it needs to be replaced.

@Dave-ld3dr 7 ай бұрын

Can you rebuild a quarter turn valve?Do you have a preference towards multi turn valves if they are the only ones you can rebuild.Also I had an extra multi turn valve & opened it up & the stem is metal or brass?Anyway would it be wise to purchase a new valve & just use the new stem instead of replacing it with a plastic one?

@DIYPlumbingGuy 7 ай бұрын

Absolutely, you're right! Quarter turn valves generally can't be rebuilt due to their unique design. When it comes to replacing multi-turn or quarter-turn valves, I prefer quarter-turn valves for their reliability and ease of use. While I showed a possible repair in the video, if you have the tools and time, a complete replacement with a new quarter-turn valve is often the better choice for long-term reliability. Thanks for tuning in and asking these questions! 👍😊

@Dave-ld3dr 7 ай бұрын

⁠so just to confirm,use quarter turn valves when possible?

@DIYPlumbingGuy 7 ай бұрын

@@Dave-ld3dr Yes, 100% !!!!

@Dave-ld3dr 7 ай бұрын

@@DIYPlumbingGuyThanks!

@user-xw3uq8lo3j 3 ай бұрын

Are the stems interchangeablefrom brand to brand? I had a Watts valve that started leaking when I cut it off. I had a spair valve, cant remember the brand name so I used the stem and nut from it in the Watts valve. It is not leaking so I hope I'm good.

@DIYPlumbingGuy 2 ай бұрын

They are pretty much same size internals. I have interchanged them. I am sure the manufacturers won’t like that and void the warranty, but it could be done.

@jjj-iz6pp 7 ай бұрын

Beside turn off main shut off valve, do you need to turn off water heater valve?

@DIYPlumbingGuy 6 ай бұрын

No need to turn off the water heater valve for this task. Just focus on shutting off the main water supply, and you'll be good to go. The cold water main straight to the toilet is the key here! 🚰🚫

@nathanielalonso9015 24 күн бұрын

I’m scared to shut off main water . Will I be ok ? And what should I do when shutting off

@DIYPlumbingGuy 23 күн бұрын

Don’t be worried. It’s pretty simple. I recommend open a faucet somewhere in the house, then try shutting the water off, you should hear the water stop running, you then know it’s off. Good luck.

@rickkane8043 2 ай бұрын

If you got the whole shut off valve assembly can I just get the gut from new one and put on the existing old one?

@DIYPlumbingGuy 2 ай бұрын

Yes, if it’s a multi turn valve you can. I’ve done it before.

@rickkane8043 2 ай бұрын

Thanks@@DIYPlumbingGuy

@rickkane8043 Ай бұрын

I can’t remove the handle so I will use the stem and the handle from new valve assembly. Maybe I need to spray a pb bluster

@DIYPlumbingGuy 23 күн бұрын

That will help break loose, just be careful, not to damage it.

@JTD1105 28 күн бұрын

Can I just replace the black washer?

@DIYPlumbingGuy 23 күн бұрын

Yes, but if you have this apart, mind as well replace it as well.

@BFbigfoot 2 ай бұрын

My valve doesn't leak. It just doesn't turn off water to the tank completely when close. Will replacing the stem fix it or do I need a new shut-off valve?

@DIYPlumbingGuy 2 ай бұрын

Replacing the stem should fix your problem

@BFbigfoot 2 ай бұрын

@@DIYPlumbingGuy ty you are godsend. 😄

@lindyhistory 4 ай бұрын

I was hoping this would work for me but valve stem would not come out.

@DIYPlumbingGuy 3 ай бұрын

Older valves are really tough to come out…

@olivasaz Ай бұрын

Is this doable for a valve that does shut off at all?

@DIYPlumbingGuy Ай бұрын

For sure!! This is the main reason you want these repaired… good luck

@olivasaz 21 күн бұрын

@@DIYPlumbingGuythank you for the reply. I removed the handle but my stem looks completely different and I’m afraid to try and remove it. Take a look at the video I made. Thank you!

@olivasaz 21 күн бұрын

kzfaq.info/get/bejne/h56ZhtR208zeg40.htmlsi=DSn-Cy8DsytxLYBj

@olivasaz 21 күн бұрын

There isn’t a retention nut so do I just pull the stem out?

@olivasaz 21 күн бұрын

@@DIYPlumbingGuymy valve was made by Keeney .

@Big_Country843 5 ай бұрын

Great video and thanks for sharing. I am replacing a bathroom faucet and the water will not shut off when I turn the shut off valves to the off position. I bad to to turn the main water supply off.

@DIYPlumbingGuy 5 ай бұрын

I know.... these valves always corrode. Good luck with your replacements. 🛠🛠👍👍