No video
Fix Your Pit Boss Hot Spot... Flame Diffuser/ Flame Tamer for Pit Boss
Рет қаралды 22,339
Күн бұрынGet your Flame Diffuser/ Flame Tamer here ($39.98): smokeslikeabos...
- Includes 1 stainless steel flame diffuser.
- This will get rid of the hot spot over the fire pot and help even out temperatures across the grates.
- Fits any Pit Boss barrel model.
- Especially beneficial to those of you with the slotted sear slider/sear plate. It will get rid of your hot spot... no flame ups because of grease dripping in fire pot.
- Want to sear that steak? Open your sear slider/plate and knock the diffuser off the top of the fire pot with a screw driver or something. We keep it easy over here, no handle involved.
Fits these Pit Boss models:
(If your model is not listed here, it will NOT fit)
KC Combo
Savannah
700
820
1000
1000 D3
Austin
XL/Rancher
Laredo
Lockhart
Pro 600, 820, 850, 1100, 1150, 1600's
Navigator Series (will NOT fit 1230g or 550g)
Sportsman Series
Competition Series (850, 1250, 1600)
Does not fit combo models unless listed above
Does not fit Lexington
Fits Traeger models
Pro Series 34
Pro Series 22
Pro 780
Iron Wood 885
If you have wing nuts holding the fire pot in, turn a bit so the flame tamer sits flush on the fire pot.
smokeslikeabos...
Facebook Group (200k+ Followers): bit.ly/PitBoss...
Instagram: / smokeslikeaboss
Fix Your Pit Boss Temperature Swings: • Fix Your Pit Boss Temp...
Pit Boss Heat Deflector Mod, Air Gap Mod, Pit Boss Grills, Heat Deflector, Heat Deflector Plate, Temperature Probe Shield, Temp Probe Shield, Temp Swings, Flame Tamer, Flame Diffuser, Pit Boss Hot Spot
@laloromero6860 2 жыл бұрын
I just got my Austin XL for an early Father’s Day gift and I’m glad I was watching your videos. Very helpful information and I’m about to make me a purchase of each item to help even out the heat. Appreciate the video.
@smokeslikeaboss 2 жыл бұрын
Have fun!
@eejae88 3 жыл бұрын
Got this with the updated PID controller for my 1150. The combination of the 2 helped to even out the temps throughout the pit. Thanks for this!!!
@smokeslikeaboss 3 жыл бұрын
Love to hear it. SMOKE ON
@Jordanfiend361 3 жыл бұрын
Nice. I have the same pellet smoker! Do you get better results putting this plate front and back or in the left and right position?
@JPHBJH 2 жыл бұрын
How does the updated PID controller help even out the temps throughout the pit?
@docotis420666 3 жыл бұрын
Gonna truly put mine to the test this weekend. Making thick girl brownies. Last 2 batches were burnt on the bottom because of the hotspot
@smokeslikeaboss 3 жыл бұрын
Right on bud. Let us know how it goes!
@docotis420666 3 жыл бұрын
@@smokeslikeaboss will do. So far so good tho
@1JohnDoe 6 ай бұрын
Waited to cook with Flame Diffuser 4 open sides; Heat shield for temp gauge; baffles. Hot spots pretty much all gone. Temp shifts gone. Is now a Rolls-Royce. Great items. Takes 1 week to arrive after oredring.
@smokeslikeaboss 6 ай бұрын
Thanks for the review. We appreciate it! Enjoy and SMOKE ON 🔥
@georgegreenhalgh993 Жыл бұрын
I had the same problem with my xl so I took a pair of tin snips to the factory heat shield and made both pieces. Cut and folded the shield for the fire pot and cut off the rounded side and after a few minutes of adjusting it fits perfectly to cover the gap near the thermometer
@kylehyma5086 3 жыл бұрын
Just ordered the diffuser as well as the heat shield and one of your shirts! I'm looking forward to putting your products to the test! Thanks for helping make a great grill better!
@smokeslikeaboss 3 жыл бұрын
Awesome to hear. Thank you for your support! Let us know how you like it
@_doomzday 2 жыл бұрын
Hey thanks a lot. I ordered mine from you guys off eBay and received it yesterday. It’s a must have for smoking
@smokeslikeaboss 2 жыл бұрын
Thank you for the comment! Enjoy and SMOKE ON
@TheCountryboy1207 2 жыл бұрын
Purchased mine a few months back for my austin works awesome!
@smokeslikeaboss 2 жыл бұрын
Awesome Tommy, we appreciate the support. SMOKE ON
@chrisgoode1578 3 ай бұрын
Center is still 50 degrees over set point whem placed front to back . Ready to sell my pitboss
@ashleymalone5396 8 ай бұрын
Im running the Pro 1600. I've found, personally, that I'm colder on the temp side vs the exhaust side. Like anything left of the burn pot isn't getting the same temps. Upwards of 20 or so degrees. Thats going off of PB temps and an oven guage sitting directly on the rack. Ive been using 2 sheets of HD foil on the last 1/3 of the cooking grates to try and push hot air back and across. I dont see how blocking heat under the high side of the diffuser would be any better. I'm open to the idea, it just doesn't make sense to me.
@justinhammy8949 2 ай бұрын
Can you tell me the specs? I’m from Canada and don’t want to pay the shipping and would like to try and make my own.
@nicholasfitchett7278 4 ай бұрын
KC combo. Do you recommend the 2 window or 4 window? Very creative solution!
@smokeslikeaboss 4 ай бұрын
I'd go with the 4-window! It has maximum air flow in all directions. smokeslikeaboss.com/products/new-flame-tamer-flame-diffuser-2
@eliascurrier1353 2 жыл бұрын
Why do you suggest positioning the flame tamer where the fire can distribute back to front? Others are saying it works best side to side. Not sure as I haven’t done any testing myself.
@smokeslikeaboss 2 жыл бұрын
Hello! It is designed so that you can position it either way. Direct heat where you want it. I just like mine front to back but I do suggest testing it out on your own Boss and see what you like!
@eliascurrier1353 2 жыл бұрын
@@smokeslikeaboss it seems you had done some testing to claim front to back was the best way it just seems logical that side to side would produce the best results. FYI I got both of your mods and I think they are helping a lot. Thanks
@smokeslikeaboss 2 жыл бұрын
@@eliascurrier1353 Love to hear it. Thanks for commenting!
@johnabel6792 2 жыл бұрын
Might be a dumb question but would this ruin the sear plate on let's say the lerado 1000? Like it obviously wouldn't ruin it but would it defeat the purpose or still work?
@smokeslikeaboss 2 жыл бұрын
No it won't ruin anything. When you're ready to sear just knock it off, I use a screwdriver lol and then pop it back on the next time you smoke!
@kupchoi Жыл бұрын
It works great 👍
@smokeslikeaboss Жыл бұрын
Thank you for your comment! SMOKE ON! 💯
@opiumextract2934 2 жыл бұрын
Thinking about cutting a cookie pan to cover my mine. Does fine but when I do a brisket, the flames catch the grease on fire (flames shooting thru the sear part) worked great at first but after a year of smoking a brisket or two a month it went to crap. Walked in to put something in the fridge, temp was 225. Came back 15 minutes later and it was 450 with a grease fire. Same spot everytime too
@smokeslikeaboss 2 жыл бұрын
Try our heat deflector mod and flame tamer. These will help stabilize any temp swings. Give it a shot! We've sold a ton and have a very satisfied customer base. www.smokeslikeaboss.com
@joshuatreadway4769 Жыл бұрын
And the main grease catcher just lays right on top?
@usmc7599 3 жыл бұрын
Have you noticed an extra amount of pellet dust in your fire pot ? Mine had a lot of build up it flamed out. That was after only one cook . Might want to clean out the fire pot after every cook.
@smokeslikeaboss 3 жыл бұрын
Yep that's how you do it
@jsimp6014 2 жыл бұрын
Are the mods needed for the Laredo 1000? Thanks
@smokeslikeaboss 2 жыл бұрын
The heat deflector mod will work on that model! smokeslikeaboss.com/products/heat-deflector-mod
@ashleyemmons2479 3 жыл бұрын
What's the shipment time frame to Kentucky? Just ordered last night. Can't wait to get it.
@smokeslikeaboss 3 жыл бұрын
Your order will ship out tomorrow afternoon! Usually takes about 3 business days to get there. Let us know if you need anything else and SMOKE ON
@danemmerich6775 2 жыл бұрын
I have my new XL and yes the Temps are way off. Just ordered the temp probe plate to help tame the ups and downs. I was thinking of making something to cover the Probe so it does not receive so much heat as well as the probe plate.
@smokeslikeaboss 2 жыл бұрын
Hello- Both of our mods with any temp fluctuations you have! I'd start with the heat deflector (please check our website to see if it will fit your model) and then move to the flame tamer. They work great together. Thanks for the comment!
@chrisyerp174 2 жыл бұрын
Do you still use the stock flame diffuser in conjuction tith the custom flame tamer plate? i knoticed it wasn't installed in your smoker! the vary thin metal one ? I just bought the austin xl gonna cook soon on it just doin like 10 mods first also il be testing with my fluke thermal imager
@smokeslikeaboss 2 жыл бұрын
These mods will help your Austin run great. The big thin tin metal plate across the bottom 25% of the barrel, that's what Pit Boss was having us remove when they didn't know why there was temp fluctuations and then I figured it out with this mod and the heat deflector. You can remove that big tin thing down there.
@chrisyerp174 2 жыл бұрын
@@smokeslikeaboss thank you was wandering why I sceen so many without it in the bottom
@menthol721 3 жыл бұрын
Does it matter which way you install the flame diffuser?
@smokeslikeaboss 3 жыл бұрын
No, you can install it with the openings front to back or side to side. I personally like mine with the openings front to back. Let me know if you need anything else!
@ksmiles5333 3 жыл бұрын
How long would it take for shipping to go to Washington State?
@smokeslikeaboss 3 жыл бұрын
We typically ship out on Monday's, Wednesday's and Friday's...depending on when you place your order it will go out and usually takes about 2-3 business days to get there!
@Deathstar_-tp4cx 2 жыл бұрын
Have you tried using the ash plate with the diffuser? And if so does it keep even temps while it’s in using the diffuser? Thank you
@smokeslikeaboss 2 жыл бұрын
You can leave it in if you wish. 99.9% of us remove the ash plate, in fact 3+ years ago, Pit Boss was having everyone remove that plate to try and stabilize temp swings. It doesn't really do anything. Our products are what will help improve the temp swings in a notable way. Thanks and have a great day!
@djordan7979 2 жыл бұрын
Will this work on the Pit Boss Pro series 600? It's the version that is sold at Lowes.
@smokeslikeaboss 2 жыл бұрын
Yes it will! Both of our mods will work on that model. smokeslikeaboss.com/
@edruzick5103 Жыл бұрын
What size is your diffuse plate for your Austin xl 1000
@smokeslikeaboss Жыл бұрын
Hello- Either the Original Flame Tamer or our New 4-Window Flame Tamer will fit the Austin XL. smokeslikeaboss.com/products/flame-diffuser-flame-tamer?variant=39542475161799
@mattrowe1229 Жыл бұрын
do you maqke a diffuser for the 150ppg table top
@dieselwrench3621 8 ай бұрын
I went to your website and not sure if should get the original or the 4 window model. I have the 1000 d3 , any recommendations would be greatly appreciated 👍
@smokeslikeaboss 7 ай бұрын
Hello! Either mod will work but I would recommend the 4-window because it has maximum airflow in all directions. smokeslikeaboss.com/products/new-flame-tamer-flame-diffuser-2
@dieselwrench3621 7 ай бұрын
@@smokeslikeaboss I really appreciate you getting back with me, and making these great products 👍
@llirickyill2075 2 жыл бұрын
Will this work on the pro series 850?
@smokeslikeaboss 2 жыл бұрын
Yes it will!
@kaivonmortazavi8656 10 ай бұрын
Ive have seen the diffuser that goes over the fire box with both 2 window opening as well as 4 window openning. Have not seen any videos on effectiveness of one vs. the other but I am sure you have tested them. What is your recommendation as to which one to purchase for either the Pittboss 1100 pro Version 3 or the Pittboss 1600 pro model - the two or 4 window? I will order once I see your response.
@smokeslikeaboss 10 ай бұрын
They both work great and are effective at getting rid of the hotspot over your flame. The 4-window is the most popular because it allows for maximum airflow in all 4 directions.
@jasondunbar3667 2 жыл бұрын
It seems like this is barely sitting on there would it fall off easily? I have to roll my smoker back and forth across concrete and I'm worried that would just always fall off whenever I hit a little bump
@smokeslikeaboss 2 жыл бұрын
Hello! It does just sit on top however it is a pretty easy fix to just check and see if it has moved at all and then set it back on top. Let us know if you have any other questions!
@klvs2ply 2 жыл бұрын
Also, did you put a thermometer on the rack directly over the sear plate? I see the one in the lid but just curious if you did right over the sear plate
@smokeslikeaboss 2 жыл бұрын
Yes we did
@grosco 7 ай бұрын
i have a bigger problem that i need to solve. Watching this video that's recorded in portrait is ruining my life
@dennis9358 2 жыл бұрын
I ordered the 'NEW' model FLAME TAMER. do you still suggest the two completely open sides to go front to back? i have 1150 PRO SERIES.
@smokeslikeaboss 2 жыл бұрын
Hello- You can do it either direction! Because of the open sides you will get even heat distribution. It's personal preference but I like mine with the open sides front to back! Thank you for your order!
@JPHBJH 2 жыл бұрын
I'm intrigued by this heat diffuser. I have a smoke daddy diffuser in pro 850 and it doesn't even out the heat like your diffuser does. How's that possible?
@smokeslikeaboss 2 жыл бұрын
This flame diffuser won't warp. You can face the opening front to back or side to side whichever works best for your boss, no other one like it. Easily moves over or u can knock off to use sear option.
@tylerdarling_ Жыл бұрын
What’s the difference between the three heat deflectors?
@smokeslikeaboss Жыл бұрын
They are all going to work great and get rid of your hotspot over the fire pit. The original, two window tamer, you can direct heat either front to back or side to side to try to help even out temps. The new four window tamer gets rid of your hotspot over fire pot and has superior air flow in all four directions. The new 3 window timer gets rid of the hotspot, and if you have an extreme difference in side to side grate temps then this would be your tamer. Generally, the four window tamer is going to be your best bet at getting rid of the hot spot over the flame and giving you nice air flow in all other directions but they all work awesome.
@SmokeTubeBBQ 2 жыл бұрын
I just got one of these for my pb 1150 pro series…i noticed that it interferes with the diffuser plate that comes with the smoker..for now i rested it on top of the diffuser plate but it sits like 6-7 inches above the firepot now insteAd for the about 2 inches like it was intended…any recommendations? Should i ditch the diffuser plate that comes with it
@smokeslikeaboss 2 жыл бұрын
Hello! Not sure why it would be sitting high on your smoker regardless if whether the diffuser plate is installed or not. It is intended to go directly above where your flame is. You can ditch the diffuser plate, it doesn't really do anything, but like I said, it shouldn't matter as far as this. product is concerned. Let us know if you have any other questions!
@donaldray2040 2 жыл бұрын
With the flame diffuser going from front to rear, does it have any effects on the paint?
@smokeslikeaboss 2 жыл бұрын
Hello! No it does not affect the paint on the Boss. Let us know if you have any other questions and SMOKE ON
@earleboege5100 2 жыл бұрын
Just ordered this for my Pit Boss 850 Pro Series II. I am curious if anybody has experience with this model and which direction works best, front to back or side to side? Thanks in advance!
@smokeslikeaboss 2 жыл бұрын
Hey Earle, I tested mine both ways and i prefer it facing front to back. All of our customers just kind of test it and see what works best for them. Both ways will help out your Boss. Thank you for the comment!
@tommyrox Жыл бұрын
Which Tamer model would you suggest for my Pit Boss 850 Pro Series II?
@smokeslikeaboss 5 ай бұрын
I'd go with the 4-window! smokeslikeaboss.com/products/new-flame-tamer-flame-diffuser-2
@tommyrox 5 ай бұрын
Thx! Just ordered
@InnerTriad 3 жыл бұрын
Hey! Does this flame tamer still allow for searing? Or would it have to be moved for searing? On the website it mentioned to just knock it over with a screw driver before searing? Just wondering how it could work with the sliding grates on the pitboss 1150 since that is such a nice feature. I actually already bought this item (currently being shipped), but just trying to learn more. Thanks in advance!
@smokeslikeaboss 3 жыл бұрын
Yes just open up and knock it off with something thin, tiny long screw driver, hanger, whatever. Easy peasy.
@juanmata2433 2 жыл бұрын
What makes you choose front to back and not side to side? Have u noticed any heat distribution issues with it front to back?
@smokeslikeaboss 2 жыл бұрын
I tested it on all four of my barrel models for a week and on all four of them it seemed to work better this way. No heat distribution issues at all. It will even out the temps along your grates.
@juanmata2433 2 жыл бұрын
@@smokeslikeaboss awesome! Thanks for the reply. Should be placing a order this week. Ordering both products!
@smokeslikeaboss 2 жыл бұрын
@@juanmata2433 thank you for the support!
@juanmata2433 2 жыл бұрын
@@smokeslikeaboss I just received my order today! Excited to install and smoke sumthing! Thanks for the fast service
@Jordanfiend361 3 жыл бұрын
I plan on ordering both parts today. Are they shipping out right away or is there a wait time??
@smokeslikeaboss 3 жыл бұрын
Your order will be shipped out within 2-3 days of ordering and they will go out priority mail shipping which is a 2 day turn around. Thank you for your support!
@Jordanfiend361 3 жыл бұрын
@@smokeslikeaboss sounds great! I just placed my order. Down Here from Corpus Christi Texas! Can’t wait to get it! I ordered both parts. Had a question. My pto is curved drip pan will still fit no problem with the flame diffuser as well right??
@smokeslikeaboss 3 жыл бұрын
@@Jordanfiend361 Awesome, thank you for your support! What kind of model do you have?
@Jordanfiend361 3 жыл бұрын
@@smokeslikeaboss thanks I just got my shipping confirmation! I have the new pit boss 1150 pro series
@smokeslikeaboss 3 жыл бұрын
@@Jordanfiend361 Yep both of these mods will work awesome on that model!
@klvs2ply 2 жыл бұрын
Will it fit the Laredo 1000?
@smokeslikeaboss 2 жыл бұрын
Hi Kenny, yes it will!
@burnmoneyfast2020 3 жыл бұрын
Anything to fit the KC Combo?
@smokeslikeaboss 3 жыл бұрын
Hello! Both our heat deflector mod and the flame tamer will help stabilize temperatures and even out the temps across your grates. You can order at: smokeslikeaboss.com
@markhickey5610 2 жыл бұрын
Would this work on a pit boss pro 600? If so I will get one!
@smokeslikeaboss 2 жыл бұрын
Hey Mark. This only works on Pit Boss models with a 700" barrel or above. So no, it won't work. Thanks for reaching out!
@markhickey5610 2 жыл бұрын
@@smokeslikeaboss can you recommend a heat deflector for a pit boss pro 600? Thanks
@smokeslikeaboss 2 жыл бұрын
@@markhickey5610 You will not need a heat deflector for that model as there is already a curve in place which is deflecting the heat from the temp probe. If you're having issues and need some help, we recommend joining our Facebook group (130k+ members). There is a lot of great information and people willing to help you get your model dialed in.
@smokeslikeaboss 2 жыл бұрын
@@markhickey5610 bit.ly/PitBossPelletGrillPelletSmokerOwners
@jeremypratt4244 3 жыл бұрын
Do you have a contact number? I've ordered your mods from the website recently and need to check an issue with you. I cannot find any contact info on there
@smokeslikeaboss 3 жыл бұрын
You can send an email to smokeslikaboss@gmail.com
@56nomadman 3 жыл бұрын
Great Video ! I'm on the fence about which grill to get. My favorite BBQ is HEAVY smoked or to the point where it is bitter or almost bitter to the taste. Will this Pit Boss get me there? Thanks RG
@smokeslikeaboss 3 жыл бұрын
Any of the Pit Boss smokers will get you to that flavor point. There's a learning curve but you can always join my Facebook group, 110+k members. Link in the video bio. This group will help get you to where you need to be with smoking.
Grill Sergeant
Рет қаралды 17 М.
Smokes Like A Boss
Рет қаралды 123 М.
The Gallery Backyard BBQ & Griddle
Рет қаралды 31 М.
Eric Hamilton
Рет қаралды 80 М.