I did this repair. I found the easiest way to remove the trim panel to access the light was to use a flathead screwdriver. Pushed it in through the seam at one end to pop open the clip that holds it in place. once you've done that you can work along the panel to free it from the remaining clips. It was quick and easy and didn't break. Be careful when removing the 8mm nuts -- suggest using a pair of needlenose pliers so they don't drop and get lost as you remove them.

Thanks a lot! Very helpful! 👍🏻 🇧🇷

Tanks a lot!

awesome! gonna try this out

Witam, to jak wyjac ten panel bez lamania zaczepu? Dzieki

I guess that it would be good enough to put silicone glue only on the gasket instead all the edge, in fact, not all the edge is engaged with the seal

Hi, What's the name for the part that you removed. I am trying to find that piece, but have no idea what it is call. Thanks

👍спасибо

Zawsze daję łapkę w górę, ale jakoś tak zaczynam myśleć , że tu nie idzie o stałego widza, tylko liczbę wyświetleń. Wersja w języku angielskim... Montaż klapy do ubikacji... Jak dla mnie - inaczej się ten kanał zapowiadał. Życzę powodzenia i nie zamierzam hejtować, ale to już nie mój klimat.

What a stupid wrong approach