THIS VIDEO GETS KIND OF SHAKEY AS I TRY TO SHOW A FEW KEY POINTS. THIS RIM IS A PERFECT EXAMPLE OF HOW RUST CAN PUSH YOUR TIRE BEAD AWAY FROM THE SEALING SURFACE OF THE RIM.
Пікірлер: 65
@raywilson8003 жыл бұрын
You did just fine. It don't make a fiddlers behind which way you use them bars.Like you said, as long as you get your tire off and back on. The only thing I know that's a must is taking the tire off the correct side. It just ain't no getting off the wrong side. I owned and operated trucks for 45 years. Many busted nuckles, broke fingers, steel splinter. I miss it Wish I could go out and hurt myself tomorrow. But life is good here at the old folks home. No scales..no cops..no DOT... no log book...no 3:00 am delivery appointments and no traffic jams. Y'all have a great day. Later on😎🇺🇸
@j.c.smithprojects3 жыл бұрын
i have made the mistake of trying to take them off the wrong side....didnt take much struggling to see what i was doing wrong.
@watajob3 жыл бұрын
Like Gramma' Aggie used to say: If you can't find time to do it right, when the hell are you going to find time to re-do it?
@j.eicher90172 жыл бұрын
Just loved your demo. You come across wonderfully. Thank you for the demo!
@ydocproductions55933 жыл бұрын
Great fix! Really good example of what rust can do to your wheels.👍
@Fishwacker59 Жыл бұрын
Thank you J.C. for saving half my life. I have a classic '72 Chevy Suburban with the rusty slow leak blues. The previous owner had new tires put on, but the shop that did it didn't correct the rusty bead issues. Now it's my problem but not to worry because generous guys like you are willing to share their knowledge and experience to help others. I just received my Ken-Tool tire irons and ordered the other stuff I need to fix the problem. I'll follow your lead and get all the rust off the wheel and tire beads, paint the wheels and remount the tires. Thanks again for your great instruction video. You're a gem. Stay safe and stay handsome. 😊👍✌
@travelingkaspersworld40963 жыл бұрын
We saw one of your future trucks outside Washington. (Recognized the logistics company). It would of been fun to leave a note under the box...so one day when the Gradall lifted it off you'd see our smiling mug. (Kilroy was here....) Thanks for all the videos!
@lakesideranch3 жыл бұрын
Nice instructional video JC. "Do it once correctly and you won't have to do it again" I remember hearing that a lot growing up! Work safe Doug@ the "ranch"
@j.c.smithprojects3 жыл бұрын
if i ever sell t shirts.....that will be on one of them!
@HODGEPODGEDODGEGARAGE3 жыл бұрын
You gotta have reliable "rollers" for projects. Nothing worse than having to air up a tire just to move something. Great job J.C 🙂👍
@bertgrau92463 жыл бұрын
that brings back a lot of memories, I started my trucking career as a tire repair/changer , when I started most tires were tube type
@jng13 жыл бұрын
Great how to video. Most don't realize how easy that actually is two handed. You made it look easy single handed.
@joemascioni31013 жыл бұрын
Great tutorial J.C.
@alphawolf8790 Жыл бұрын
Well you made that look easy. I'll be probably at it all day fixing my leaking rim
@jerrykinnin79413 жыл бұрын
Thanks for the mechanics lesson.
@brianherron54003 жыл бұрын
That's the way I dismount and mount tires just like that 👌
@FaustoTheBoozehound3 жыл бұрын
The less experienced among us appreciate the details 👍
@j.c.smithprojects3 жыл бұрын
that is who i was focusing on. hope it helps.
@Ezrider3593 жыл бұрын
one of these days i want to get a tire machine for the smaller tires, ones like you did in this video is about the smallest ill do manually, much smaller and its worth it to me to pay the tire shop...lol semi tires are easy
@j.c.smithprojects3 жыл бұрын
i would rather do an entire semi truck and trailer tire change than to do those little lawn mower tires!
@Darryl6033 жыл бұрын
With the valve stem out, I just hold back on the connector on the end of the air hose and push it onto the valve stem . That allows full line pressure in to inflate the tire. I usually have the tire standing up like you did. Like anything else, your mileage may vary. You got it down pretty good though. If the tire's no good, we just break the bead with the backhoe bucket... I wish I had those tire irons though...lol
@jamesrichardson771 Жыл бұрын
Good philosophy !!!
@tractorboy313 жыл бұрын
I tried popping a 13.6 x 36 tractor tire off. No luck it was stuck bad. Hadnt been off for say 30 years. Vechicle tires and lawn tractor tires i use a ratchet strap to squeeze the tire and the beads seat fairly easy. I have a nice tire chuck now that clamps on and has a blow nozzle handle with tire gauge about 3ft apart. Works nice. Brother had a flat on his tractor and had the tire shop break it down and i told him needed to paint the rim. Tire had been on that tractor 40 some years (guessing) never been loaded and had 90% paint still but still cleaned it and did quick rattle can job. I was going away for weekend so i just did tire side not the side you see. My rims had been fixed (calcium chloride for many years) on my tractor and i just replaced them and didnt want same for brother
@j.c.smithprojects3 жыл бұрын
i have used the ratchet strap method a few times with success. some of those old tractor tires can be really tough....patience and persistence usually wins.
@tractorboy313 жыл бұрын
@@j.c.smithprojects helping with a tractor tire on friends farm we laided it on the ground and backed a ford 5000 tractor onto the tire and that 5000 had loaded tires with wheel wieghts and still didnt pop the bead. Old tires can be a royal pain
@HighGrade_FireBlade Жыл бұрын
I made some gouges in the paint on the bead sealing surface of my motorcycles rim. Will those scratches affect sealing?
@Fragmentsofmatter6 ай бұрын
Thanks man!
@commercialelectrician1333 жыл бұрын
Great video
@kevinlamarr14243 жыл бұрын
I tell guys all the time to make sure the tire guy cleans the wheel before putting on a new tire because even on aluminum wheels there’s rubber build up that can cause small leaks and depending on the temperature, big problems later on.
@b.a.lineman75823 жыл бұрын
Tire rack in these parts does it all the time... little more $ all said n done but, well worth it... Shrader locally for big truck tires... both shops CARE👍
@Vacublaster1 Жыл бұрын
The needle core in the valve stem is called a Schrader Valve
@Amezcuat2 жыл бұрын
Do u recommend painting the inside of rim so it won't rust?
@vermontvermont92927 ай бұрын
I have a small leak on the outer bead. Very small. Couldn't I remove the core, and but some slop around the rim, and refill with air? It's on a non rusty aluminum wheel.
@DIRT-BOSS3 жыл бұрын
Nice i have to do this to my front backhoe rim.. always slow leak at bead
@j.c.smithprojects3 жыл бұрын
that sure can be irritating. airing up a tire before you use the machine gets time consuming.
@gregdiaz57883 жыл бұрын
do it right the first time and you won't have problems that is correct JC but it's funny I also use a cardboard to lay my tires on thanks for the tip
@j.c.smithprojects3 жыл бұрын
on nicer wheels i use a rug or a piece of carpet so it doesnt get scratched.
@norcalray71823 жыл бұрын
Have you ever tried tire paste? I use that my shop .it doesn't spill . It never failed somebody was bound to kick it over then you have soap all over the place.lol
@j.c.smithprojects3 жыл бұрын
agreed. this is a soap paste i guess. you dont add water. just use it straight.
@lukequigley121 Жыл бұрын
Worked at a tire shop for 2mo in the 70's..Had all the safety devices at time but i couldn"t stand to hear the popping of the sealing beads..Found a tech job that did fewer tires and IT WASN'T ME..
@justinmurray59387 ай бұрын
Thanks buddy my atv was doing the same thing and it's not leaking now
@SoybeanFarmer33003 жыл бұрын
whatever we do, do it right the first time. I like the long irons, mine are too short.
@j.c.smithprojects3 жыл бұрын
they are helpful for the larger tires for sure.
@donwatson74853 жыл бұрын
That's the way I do it it must be right😁
@chrisbyers3863 жыл бұрын
Better then using old crowbars for tire swap
@dannyfromtexas59893 жыл бұрын
Enjoy the videos by the way
@buckberthod50073 жыл бұрын
Just a curious question but do you ever use the ether trick to set beads when working with equipment tires or big tires?
@j.c.smithprojects3 жыл бұрын
i dont. i have never needed to. i have a air blast tank to help seat beads. it has worked every time so far.
@timbodtoolman70253 жыл бұрын
Yeah man do it right do it once👍👊🏻
@georgecurtis64633 жыл бұрын
Needle ?
@Milfordbeach7 ай бұрын
👍👍👍
@evilkidd1743 жыл бұрын
"This isn't something for guys that do the same thing I do" quote by J.C. Smith. Follow on quote should be "This is for the man-bun wearing members of Generation Lost".
@4X4F250Diesel3 жыл бұрын
I use the backhoe lot easier than a hammer
@chrisking14293 жыл бұрын
I bought the harbor freight tire changer just to break beads.
@j.c.smithprojects3 жыл бұрын
my bead breaker is blue and has wheels! hahaha!
@martinparker92497 ай бұрын
GREAT........now try doin a 225/40/18 low profile tyre !!
@j.c.smithprojects7 ай бұрын
i dont work on kids toys.
@peterantonic69233 жыл бұрын
Do it once, and do it properly then you won't have to do it again. 👍
@dannyfromtexas59893 жыл бұрын
Cooper tires suck. All I’ve ever had is trouble from them
@Daves_adventures43153 жыл бұрын
I got 58k out of my 60k
@dannyfromtexas59893 жыл бұрын
David Cotrell I used to run them on one tons and dump trucks because they were readily available where I was and cheap. Always had problems with cord separations.
@Daves_adventures43153 жыл бұрын
Danny From Texas guess that’s the difference, I’m talking lite trucks.