The voices are always my favourite part 😂

I've tried some non wax products, but I've found that wax is the most efficient. Nice work

You were taught the right way plumber dude. Good job. PS Your voices are hilarious.

No gloves is crazy lol 💀

"Little hack boy" got me 😂 I've always done it with silicone just like you did. Nice work 👍

pro tip: smear wax to fill in all the gaps around the flange, up to the floor, so that if it ever leaks in the future, it won't leak into the floor. It will only show up on the floor around your toilet. That way, your floor won't rot out before you know it's leaking :P

Wax is awesome. It’s probably the oldest compound still used in home construction.

Bro your damn voices 🤣🤣🤣🤣 I thought I was watching Jurassic Park. Swore I heard a pterodactyl screeching at the 30 second mark😅😅

lmao the end got me

That hey boy you should replace the flange really got me, and they always do but this one 😂😂😂

“Hey boy, make sure you tighten your screws on opposite sides first instead of next to each other”

I have never had a subfloor that actually was able to hold screws tbh

You do good work and have great videos. One bit of advice…. Never use silicone on any flange extensions. No matter if the manufacturer recommends it or not. I’ve been in the business over 35 yrs and use to use silicone… about 25yrs ago one failed and when I took it apart I saw the silicone doesn’t stick to any waxed surface even after cleaning it and wiping it with denatured alcohol. It doesn’t bond well with the extension either. When the screws are installed they create waves and the high spots create voids. I use another sealant but, putting a 1/4” - 3/8” layer of wax from a wax ring will bond to everything and won’t leave separate from the voids. The manufacturer isn’t the one who’s going to go out to redo the job if it fails. It would probably only leak if the drain line clogs and backs up. Not criticizing, just trying to be helpful.

In the UK the soil pipe comes out the floor ,close to the wall and then the 4" pipe is cut close to the floor If the soil pipe comes through the wall ,it set about 6" centre from centre the pipe to the floor We use solid or flexy pan connector . ..

They make a max wax wax 😂 I just watched the Oatey video 😂😂 your doing the right thing here 👍👍

"Baaahhhwwggg Should of used Makita instead of Milwaukee baaahhwwgg!!

I just realized the voiceover sounds like ms fowl from jimmy neutron 😂

Hey boy!!!...Be careful, you dont over tighten those flange screws or you will end up cracking the flange down the road and compromising the wax ring,boy!! 😆 lol

I have found that using silicone over the wax residue will almost certainly fail. Cut a wax ring to 1/2 thickness and use that instead. Also, the wax rings with the plastic horn will usually cause a leak if used where the collar sits flush or above the floor. Master Plumber for 33 years.

I noticed the 12 characters are always piping up together. Is one a retired plumber? The other one sounds like the plumbers parrot! LoL

😅😅😅😅The hey boy at the end. Lol... You lil Hak bwah 😅😅😅😅

The old geezer plumber voice is the best!

😂😂😂 the self trolling is hilarious

This is hilarious 😂 I hope these voices gain traction in all 'work' videos

🤣🤣🤣🤣🤣🤣 brah this voiceover killed me

You are right. In America it is backwards plumbing

The eh boy got more and more like the Cajun guy from waterboy 😂😂😂

Hack boy ... i literally snorted out the milk i was drinking. Sounds exactly like a journeyman I used to work with once in a while: "you ain't a plumber, boy. Go back to delivering pizzas." (I was a bartender lol)

Perfect use of a spacer! I use a reinforced extra thick wax ring on every toilet. Nothing like peace of mind

I was taught to never use Silicone on toilet flanges

he said .. yeah okay 😂😂 😂

Fukin love the voice overs..😂

“Aye boy!”😂

😂 as a plumber in my 20s this is absolutely hilarious cause that’s really how the older guys sound 😂😂😂

Nice fix! I use the Fernco wax less system for over 20 years, it’s absolutely GREAT!

Haven't worked with wax rings, or any "proper" plumbing, but I've dismantled/maintained/put together my fair share of Blake marine toilets. They've been made for 80 years, if not more, entirely handmade in England, with only English parts, and priced accordingly, a new Victory (their top model) costs over ten grand, so them being called "the Rolls-Royce of marine toilets" makes sense both in quality and cost. But by god are they amazing to both use and work on, basically foolproof! All the hardware is metal, the pan porcelain, with seals and gaskets made out of rubber and leather (yes really). Spare kits of all the seals and gaskets are like 400 bucks, and you can buy just about part separately, even the porcelain pan. Not everything new is better, and maybe wax rings are one of those things.

The chicken man is my favorite heckle!

Uuuuurrrrraaahhh!!!😂😂😂

Love the endings! Lmao

I love the voices 😂 but seriously like your videos man....good job

The only thing I recommend is gloves 🤢

Awwww I hope you got rid of that bug that was crawling across the floor in the middle of the video, I know I would have if I was on that job site 😂

Thank you! Need to do this at home too. Don't want to be "hey boy", but how do you know to secure the extension to the existing flange with the machine screws? Thanks.

“Ay boy” gives me flash backs every time I disappointed my dad 😂

Man! I love the voices!!😂

Hey BOYYYYY

Very informative and hey boy is hilarious

😂😂😂😂 you’re funny

Been using Sani Seal for about 10 years now. Never had a leak or call back. They surprised me when a toilet, at an extremely overweight customer's house, was loose, every time i was there for something. I eventually had to use Marine Grade Silicone Adhesive, to hold toilet to the floor. But, even with toilet moving an inch or so, the Sani Seal never leaked. One more advantage, is at gas stations I service. If I have to pull a toilet to rod, I can re use Sani Seal. I do replace them every 3 to 4 times, or 6 months, if toilet is removed often. I've tired Korky and Fluid master wax less, but don't think they're as good as the green Sani Seals. A quick note... They redesigned them a year or 2 ago. Originally had a 2 inch flap, that folded into flange, or allowed you to stack 2 gaskets if needed. Probably tried saving a few cents during manufacturing. They sill work great, but I liked them more, before they omitted the flap. Wax seals are great, under perfect conditions, but how often do you find a flange in perfect shape.

I've watched all your videos multiple times, I've done a lot of plumbing around the house because of you. Thank you.

The flange had to be cleaned with acetone bro, to remove all oils and wax residue so the silicone can bond properly!

Heyyy boy. I need to fix mine tonight, thanks for the video

I had good luck with the Oatey extension flange when we redid our floors and replaced our toilet

I've used 2 waxless options, specifically reguested by the customer, and both were service calls withing 3 months because of leaking. I now refuse to do work for people who request waxless. 30 years and ive only had 1 wax ring ever leak on me because it was to vold when i out it in and the toilet shifted. Even then i was able to go squish down the toilet and tighted the bolts to fix it.

The Hey Boi Is off the chain crazy 😂😂😂😂😂😂😂😂

"Hey Boay" a bit strict 😊😁👍 Can you post the long version of this video?

Love the bug cameo

Voiceovers got me 😅 thanks for the tip

Bro, the voice skits. Crack me tf up.

My favorite part was the bug crawling

That is easily the worst silicone application i have ever witnessed in a waterproof required environment…

The only waxless product I’ve found that seems reliable is the green foam Sani seals. But we only use those in bathrooms with in-floor heat.

When are the T-shirts arriving "merch" that are printed with "HEY BOY..."???

We live for the voice-overs when you have time. Thx!!

Hey boy looks perfect!

I really enjoy this channel, I think you should add more of a training angle to the videos if you can

I DID THIS ONCE.😅 THAT WAS ENOUGH. THANKS BOY

Hey boy. That's hilarious I die laughing everytime you say that

The voices are getting better and funnier 😂

Never use a wax ring with a horn, boy!!! 😂

My only advice is to let the silicone dry before flushing toilet.

Better than wax is fine until you have to plunge it...

You sure do a lot of business for Mrs. Fowl!

It's always the caulk 😂

Nice job good😊

I WAS WAITING FOR A CUT OFF HE BOY

New flange may be higher than old but it is still low.

Bro the voices kill me 😂 solid work tho man

You don't tighten the screws on anything going in a circular pattern...you do an X pattern...tighten the one across from you, not next to you

Hey where are you base off? I like your work and was wondering if you are in Chicago?

I just laugh at the screwing down and it went a little sideways I could almost hear him say hmm

I thought professionals like the foam rings better. They don't leak if the toilet moves

Love your content! Keep them coming!

🤣🤣 it sounds like you get beat up in the comments quite a bit I love these types of videos you do a great job in my eyes bro ♥️💪🏼💪🏼

Best videos

At the very least you could have used the X pattern for tightening those screws to make sure the ring doesn't flex too much

Wear some gloves 😂

Tip: WEAR GLOVES!!

Old man voice” errr why didn’t he finish wiping done the old wax before applying the silicone, errr silicon can’t adhere to the flange with wax in between”😂😂😂😂

Way to get a "Hey Boy" in the end!

Silicone doesn’t stick to plastic with any serious integrity.

Perfect is good enough! 👍👍

What do you do if toilet flange is too high above a floor with concrete foundation? Wax would just get all pushed out and not make a seal ended up cutting a rubber ring in half and it worked so far. Anything else that can be done without busting concrete?

Hey boy, go get that bug that crawled by😅

Nice gloves

I like the troll voices are being cut midway at the end

Tough guy got CHOPPED at the end ha …..

Whatever the flange is broken. I can't put the screws through it and my toilet is leaning to one side. Can you make a video about that or do you have a video already made for it?

I wish we stuck with the old school stuff more. After watching Hydro NYC do those lead shower pans I’m really fucking jealous. As much as I like a propress and pex pipe, I still don’t think it’s as good as copper with sweat fittings.

Lol the ending was hilarious