Thanks, thanks, thanks. Two years after receiving Logitech Harmony 650, half of the keys were not working. After pasting the aluminum foil, it works perfectly. You saved me from giving $ 50 to a new remote. I did it in a slightly different way; First I glued the aluminum foil to a piece of paper. After it was dry, I punched it with a belt-piercing tool and removed a 3 mm diameter round piece. Then, I glued the surface of the paper to the remote control with fast japanese glue. The result is excellent. from Turkey with love.

This really works! Thank you mikemanmade! I thought the RC of our motorized curtain was a goner already. Now it works like new!

Thanks for the info. Worked for me. After watching a couple of videos at last I found the right one for my remote control problem. I did not used the glue, maybe next time. A lot of Blessings.

I found that NO glue sticks to this miracle rubber key pad.....except a tiny dab of this stretchy green stuff used for hanging pictures on the wall (without nails)....this really solved my problem and rejuvenated my RC..

DUDE!! I actually tried this on an old, OLD Yamaha receiver remote control that I had that I almost felt so upset with (because I had to press down on the buttons so hard even after cleaning multiple times) that I almost felt like smashing it ... but then… I watched your video and although I didn't have "contact cement", I ended up using double stick tape and used scissors to cut the aluminum foil (into the perfect shapes) and it works SPECTACULARLY! Dude… You are a genius :-)

Works perfectly fine. I'm so stunned and grateful. You deserve my sub :)

Another quick fix for these buttons is graphite from pencil lead. Just run the pencil lead on a file and then run the buttons in the powder you made. I did this for the power button on my TV remote, not sure how long it will last. 😁

Worked flawlessly, didn't even use glue. Cheers mate!

Fantastic solution - I tried it and now the remote works brilliantly - great stuff

Thanks! I used self sticking aluminium tape, used a leather hole puncher so no fiddling with a blade. Popped it out with a little wire from the inside. Not sure how long it will hold, but my 22 year old calculator works once more :)

Thanks it totally works.. i have an issue with my tv the power button doesnt working anymore unless you use a remote control..my remote doesnt work anymore the buttons are not working, until i watch this video omg i was shocked it works your a genius lifesaver

You could try conductive paint as some peeps have suggested or you could also try adhesive copper tape which you can get from an electronics store. Used to fix circuit tracks, they are already quite thin and comes in rolls of several meters. Only costs like $5 and has enough to let you fix hundreds of remotes ;)

You can use paper punch hole for perfect round foil pads

Hi Mike@ It's working!!! Thank for the tip!

++1 presentation. Repair achieved here. Thanks Mr Mike.

Worked perfectly. Thanks very much for the video.

I've done nearly the same thing on some of my chintzy momentary logic switches. Currently using super glue, as I considered the thickness of the glue could be an issue. The issue now is that I'm not sure that the SG is holding the foil to the pad good enough. On and off works, but I usually have to try a few times to get it to happen, and sometimes it turns itself on. Today's cure is that I just keep the battery detached until I need the radio. Thanks Man, and nice!

Nice job! Great video, no annoying background music!

I just want to say thank you I tried it today and it worked.

Thanks! I was about to chuck my remote but this worked!

Mine is exactly the same remote as shown here, Onkyo. Only the master volume was out. I used scotch double-sided tape and foil from the kitchen drawer. Works fine now. We'll see how long it lasts; I can always do it again!

Thank's Man , works like a charme :o Amazing !

Yes this old but good technic. All that i have repaired likethis still working for more than 10 years now

Growing up on a farm in rural North Dakota, some 25 miles from the nearest town over horrid dirt roads, we found that when things broke we had to be innovative when repairs were needed. I discovered many ways to fix things that I still use today when the store is just down the road.

worked a treat, thanks mate.

Thanks .I have a question .I have the glass cleaner at home . My question is can i use a usual glue for the foil or surely have to use the glue of wood like seen in your tuturiol video ??? What kind of glue is suitable for the TV remote ??

Awesome - I put aluminium foil and fixed my remote , thanks dude

Got to try it . Some pads are just deat beat . Cleaned and brushed, some improvement . Lets see if the 1997 Nordlead V1.3 plays again, with aluminium foil. Been nice after 1 million hours on the machine .

I have two LG AKB732955 Freespace Magic Motion Remote Controls. The on/off button for each RC shows IR blue light in a camera view. But the other buttons on both RCs show nothing. How do the other buttons send a signal if there is no blue light?

I did the same with my remote but i used double sided tape and foil punched out with a hole punch

Thank you! I was ready to give up I used instant glue and thicker aluminium piece. Hope in long term outcome! I was ready to give up, but you saved my reputation and the life of my tv control , at least for to day!

Thank you.You helped me a lot !

Perfekt. Fernbedienung geht wieder einwandfrei. TOP. Danke.

you can also use aluminium double sized adhesive tape

hello everyone. How can I reconstruct the conductive inner conductive layer in the rubber keys ?? How can I create a homemade graphite paint?

foil worked perfect. thanks so much

Does someone know where the clips are (Onkyo RC-660S)? And is its plastic de-yellowable?

I tried it to my calculator and it's worked, Thanks bruhh

The number bottons in my remote are not working, so I use arrow to move to other channel. Please give me some advice. Thanks

Thank you so much for showing me how to clean my remote you are an angel. There was moisture in in my remote.i took it apart an dried it out. You saved me at least $15.00. dollars. You are a blessing thank you thank you thank you.😊😊😊❤❤😂❤❤❤

Thanks, it really works for the power button of my remote. I used Blu-Tack to stick the aluminium foil to the rubber button.

This is great, I used it to replace the conductive rubber on my cheap ass 4 octave keyboard, so far I made 1 octave, works awesome and sounds more metal. Thank you!

over time the soft metal will flake off and deposit in the pcb pads shorting them out. there are pad repairs kits with carbon paint..

thanks for this, i was trying to break my head figuring out a way to make 1 of the buttons on a projector remote conductive again. never would have thought of this. second thanks goes to uncle Google.

wo old batteries inside my control burst and opened the battery feed tracks on the control board! The trails are very thin! If I adapt an aluminum fillet, can I revive the control?

It worked 100% .... I just have to say thanks !!

No doubt it will work good but you used rubber based adhesive, so will it stick to aluminium foil for long? I have a doubt.

A tip that worked for me. Take tiny piece of steel wool and run off the small things that are left on the rubber surface. I tried the most things but this worked

Good.. Your tuition almost similar to my HiFi CD player.. The Lid Close and Open everytime.. CD wont play at this movement..

I tried this for the two power buttons on my remote that aren't working, but unfortunately it wasn't successful. What should I try next?

what type of glue are you using? I tried super glue, white adhesive, synthetic rubber based adhesive, but each of these wears out after few weeks, the one which holds the aluminum for about a month is nail polish!!! I need a longer staying solution.

which buttons are required to fix with alumium foil.

Tutorial without pain-in-the-ass music, no extra compents, pascience, useful. Thanks

Los rueditas se pueden hacerlos con un troquelito de la medida. Así es muy arriesgado se puede cortar el hule y sale más costoso repararlo.

great advice- thank you!!

worked like a charm....thanks...

Wow! This worked (and I have the same remote). I hope it lasts. Thank you, thank you!

I really hate it when a person doesn't verbalize teaching you instructions about something . I like to listen to instructions while I'm doing my house work. Plus it doesn't pay homage to a person that's blind and may need to listen

this didnt work for me. my top 5 buttons arențt working anymore. the bad thing is that the damn power button isnt working. i tried using another button (wich works on the bottom) for the power button and not working also. What to try next? cleanned it with alchool, putting aluminium foil...

I love having no annoying music or irritating noises in your video. And no annoying texts that I have to pause the video to read with a magnifying glass. Some dialogue would have been nice.

Have you tried the liquid copper that is used to repair circuit board traces?

I’m doubtful this works for more than a couple of days. I’ve tried several glues and none stuck to the silicone pads for more than a few days. Anyone have long term success with this contact cement?

It doesn't work for me. I'm so bummed. And just this morning, the button I'm having the problem with miraculous worked ONCE. I couldn't repeat my fortune. I have several DVD with a TV show recorded on them, but they were never finalized for playing in other DVD players. Of course, this is the one button I really need. All other buttons seem to work fine. Any tips? Thanks.

The power button of our remote doesn't work anymore, but the rest of the buttons work. It annoys me a lot, even the power button of our TV is not working anymore.

Cheers. Great advice.

I've used a hole punch to make perfect circles in the foil! The risk of using foil is if a piece comes loose, you risk it shorting your electronics. This method works, but you could zap everything if a piece dislodges! Caution!!

I thought I was clumsy. Tedious work.

What about using a hole puncher for the foil?

I have a samsung remote and when I opened it up there was no rubber pad only a cardboard looking one which I could not remove. I had high hopes of fixing my remote. Ugh

very tedious and very surgical work! I wonder... they used to sale a special electric conducting glue in the auto stores. to repair the broken lines on the rear window heater lines. I wonder, if this may work. Seems it will be much easier.

Never leav the lid off a tin of contact adhesive, you might become addicted!

aluminium is conductive, wont the button keep energized.???

A big THANK YOU!

Anna nuvvu tesukunna foil box cost enta

will it be some kinda life threatening issue, if he spoke while attending to the remote control?

Thank you so mutch........now i am repair and good working

Hah! That's the EXACT remote control I'm trying to fix!

Years ago I used metallic tape to do the same thing. It already had glue on the back. It was a roll of metallic tape left over from putting together a metal shed. Used to waterproof the shed. You can probably get it at most hardware stores. And there was enough tape to fix hundreds of remotes. Less mess. Less fuss. I just cut a narrow strip of a couple inches long and clipped off little squares with scissors and stuck them right in. The method in this video is way too much work.

Perfect !!!

Thanks for information Mera kharab remod ban gaya

Hey mike!. I liked your video and don't mind the quiet either. Also wanted to add that I used that shelf adhesive aluminum tape forme the homeless deathspot and it worked really well. It's a bit of a bitch to cut but overall worth the hassle.

Thank u for the info

you totally forgot to clean the contact side, men !!!

I have an old sharp crt tv with a busted power button and it has a remote which is also unresponsive. But trying the foil method actually made the remote work again. Thanks!

Great video... thx!!!

thnks u have saved my day, and wallets

Thanks for inf.I shall try.

thank you for not playing elevator music.

I did it and it works,very smart .

Try double adhesive tape.

best if played back at 2X speed

This is not a long term fix. I did this years ago and was lucky if it lasted a week of use. Just buy a replacement remote on eBay.

My dog chewed off my volume remote for a Samsung tv. Any ideas (besides buying a new one)

Very Helpful. Thank yoy

I solve it with self-adhesive Al foil and cut it out with a hole punch.

सिगरेट की पन्नी भी काम करती है क्विकफिक्स से चिपका दो गोल काटने के लिये पेपर पंच का प्रयोग करें।

I used liquid silver (bison). Much easier. Also he start ripping it open with batteries stil in it. Cutting silver before not in rubber mat

❤ nice information

100% silicone caulk is the only thing that sticks to silicone rubber.

OK, BUT IT DOESN'T WORK ! I TRIED IT.