Fixing a Viewer's BROKEN Gaming PC?

Fixing a Viewer's BROKEN Gaming PC? - Fix or Flop S5:E5

Рет қаралды 140,345

3 ай бұрын

SPONSOR: Check out the new Corsair A115 CPU tower cooler! geni.us/miWEX
Welcome to Fix or Flop! We're up to Season 5, Episode 5. This viewer's gaming PC doesn't work! Can it be fixed? By the way, if you live in the Orlando, FL area and have an issue with your PC, apply to have it (possibly) fixed for free today! gregsalazar.com/fix-or-flop
Check out other Fix or Flop episodes in this playlist: • Fix or Flop
⭐ Consider supporting us on Patreon! / gregsalazar
SPONSOR: Snag a vip-scdkey.com OEM Windows 10/11 key for $16 and use code 'SKGS' for a 25% discount: www.vip-scdkey.com/sks/SKGS10
Windows 11 Pro ($23): www.vip-scdkey.com/sks/SKGS11
Office 2019 Pro ($50): www.vip-scdkey.com/sks/SKGS19
🛠️ My troubleshooting gear:
Feiasia 1080p Portable Monitor: geni.us/mdHaU
FLIR C5 Thermal Camera: geni.us/3ALEI
Skybasic Digital Microscope: geni.us/6zurf
YIHUA Soldering Station: geni.us/DbjS
Helping Hand Soldering Board: geni.us/7DDrL
Xool 80 Precision Tool Set: geni.us/1IfxDSw
PassMark Inline PSU Tester: bit.ly/3BoBHoQ
🧼 My cleaning gear:
SYINE Respirator Mask: geni.us/V4uA
Scott Shop Towels: geni.us/rIy5O6Y
Electric Air Duster: geni.us/RALt4
ONSON Cordless Vacuum: geni.us/aABrFWE
Medical Grade 99.9% Isopropyl Alcohol: geni.us/tBVQ
Q-tips Cotton Swabs: geni.us/nQhVVQm
Xool 80 Precision Tool Set: geni.us/1IfxDSw
Hizek Black Disposable Gloves: geni.us/MBCJaf
🎬 My studio gear on Amazon:
Sony A7C (Primary): geni.us/lOeoIA9
Sony a6600 (Secondary): geni.us/k8VBToq
Sony a6400 (Webcam): geni.us/24nqw
2x Pixio PX277 Prime 165Hz IPS Monitors: geni.us/bCg4nD
Neewer LED Lighting Kit: geni.us/9VTXr0
Audio-Technica AT2035: geni.us/xvQc
Yamaha MG10XU Mixer: geni.us/d4VvGM
Neewer Microphone Arms: geni.us/1w5Sx2Y
Arrowzoom Sound-Damping Foam Panels: geni.us/EKFxZc
📱 Follow me on social media:
TWITCH: / gregsalazar
FACEBOOK: / gregsalazaryt
TWITTER: / gregsalazaryt
INSTAGRAM: / gregsalazaryt
💻 Join our public Discord server: / discord
🎵 Channel music provided by Monstercat: / monstercat
DISCLOSURES: All Genius links are tied to our Amazon Associate account, from which we earn a small sales commission. Links containing a 'bit.ly' reference forwarding to Newegg are tied to our Rakuten account, from which we earn a small sales commission. All sponsored links and comments will contain the word "SPONSOR" or "AD." Any additional revenue stream will be disclosed with similar verbiage.
#FixOrFlop

Пікірлер: 755

@BLOoMIND 3 ай бұрын

YT algo loves this series. I have been getting constant top row placement over the past few months, within minutes of publishing. 1 minute ago today!

@GregSalazar 3 ай бұрын

Wish it was that way for everyone! Compared to earlier seasons, these don't quite gain the traction they once had. Still grateful for all the support!

@cris1735 3 ай бұрын

Same. I saw this video as soon as I opened the KZfaq app.

@altus8312 3 ай бұрын

@@GregSalazarpopped up for me 14 min after posting!

@RayPearcetv 3 ай бұрын

Same with my algorithm. Soon as I opened the app it was the top video

@LionTree 3 ай бұрын

Same! I've learned a lot from this series

@Lagg_007 3 ай бұрын

Greg's Gremlin keeps turning off the power strip on him. Your not supposed to feed them after midnight 😂😂

@adamtajhassam9188 3 ай бұрын

bios update time checking bent pins on that board i liked when he did that b4

@MatFoxSimRacing 3 ай бұрын

fun fact: Greg chooses his lottery numbers based on that week's Dr Debug codes

@RDJ134 3 ай бұрын

TBH it's a good idea to run those numbers :)

@YouEnvyMe28 3 ай бұрын

Found you on YT about two years ago and always watch every episode. So excited to see the new house getting set up, congrats!!!

@GregSalazar 3 ай бұрын

I really appreciate it!

@DarkroeTech 3 ай бұрын

My guess is that the previous motherboard had either BIOS issues, power delivery issues, or both. Meaning I think the AIO pump was not being given enough power to properly cool the CPU / move the pump effectively, causing the cold plate to get very hot and warping the plastic of the socket, which was a symptom of the motherboard's failures, and a red herring to the actual problem. Well done identifying that issue!

@benjaminsmekens2344 3 ай бұрын

That board is a complete POS, they literally forgot to make it usable, and I'm not the only one, just search for X670E aorus master and boot/post issues... You'll be surprised for a so called "premium" board. I'm contemplating switching to a MEG X670E GODLIKE, fuck Gigabyte, not buying their stuff again until they fix this dumpster fire. However, since the timing of the zen5 release and the fact that my computer 'works' just fine apart from the random no post/booting issues (~95% of the time it shits the bed on boot, so takes me around 15-30 minutes to get it fully booted into windows), so my temporary work around is to never turn it off. It will handle reboots fine for updates, etc, but cold start is a dumpster fire. Just my experience

@ghoffmann821 Ай бұрын

100% power. Either overvolting the CPU or not powering the AIO. My guess is, failed cap(s).

@Rushil69420 17 күн бұрын

I just got so paranoid after reading this lol.

@x8jason8x 3 ай бұрын

Complete bricks are always fun to diagnose! Said no one ever. 😂

@MaheerKibria 3 ай бұрын

This was an easy diagnosis. I appreciate how he went about showing how to diagnose it without relying on the debug code, but the debug code told us everything we needed to know which is that the Northbridge initialization was failing which on a Ryzen means that there were problems communicating with the IO die. CPU or motherboard. A closer inspection showed a warped socket. Content aside This is why I love POST/Debug/Q codes.

@johnt.848 3 ай бұрын

Actually I love trying to diagnose them, they challenge me.

@x8jason8x 3 ай бұрын

@@MaheerKibria Yeah the Dr Debug is a winner.

@zadekeys2194 2 ай бұрын

I'm 90% sure a BIOS flash will fix this board. Sad to see he didn't try it.

@x8jason8x 2 ай бұрын

@@zadekeys2194 Yikes... the L is very big... massive. Just what do you think a BIOS flash is gonna do for a warped CPU socket? 😬😬😬

@murraystechtime8530 3 ай бұрын

I've been an electronice repair tech since 1973 and a computer repair technologist since 1978, you are doing a great job at troubleshooting. I did do repair to component level but that was a long time ago. Great video...

@GregSalazar 3 ай бұрын

I appreciate that!

@LimbaZero 2 ай бұрын

I follow few YT repair channels that do board level repairs. Usually case is that you would need to rebuild whole system or it's laptop motherboard.

@murraystechtime8530 2 ай бұрын

@@LimbaZero Louis Rossmann when he was in NY, I saw him and a few asian places it was Taiwan or China I think. You need some special gear if you do that now a days, or have a lot of patience and a heat gun and soldering station.

@LimbaZero 2 ай бұрын

@@murraystechtime8530 Soldering station with heat gun is mandatory for board level fixes. I have watched some Louis videos. Other what I have watched is Adamant IT is from UK and he also show how to fix bit rot bios. He mainly fix different laptops or fix those dell/hp desktops where you can't get new motherboard so easily.

@murraystechtime8530 2 ай бұрын

@@LimbaZero I saw them do surface mounted IC's you have to use a lot of flux and just the right amount of heat alot of cleanup and prep to resolder the replacement IC. Mybe one day I'll try but it will have to be soon as I am 68...

@MaheerKibria 3 ай бұрын

So 15 is a pre-memory Northbridge initialization. 46 is one of the ones gigabyte doesn't tell us and just tells us it's reserved. 00 is a restart. That told me that it was never the memory. This narrows it down to CPU or MB. For some reason, the motherboard is having trouble communicating with the IO Die Those codes are useful if you know how to read them. Once we saw the socket was warped it was definitely the motherboard not making good contact. I know a lot of people think debug LEDs are good enough and 90% of the time they are but in cases like this you could have diagnosed this in like 5 minutes by just reading the debug codes. I feel like this should be a standard feature. I miss the days when you could just add a post card and read post codes by plugging it into the LPC debug port or PCIe bus.

@RichWhiteUM 3 ай бұрын

46 is also a memory code, I just don't remember which sequence it is.

@shiftto 3 ай бұрын

work as you said how can we have a length enough videos to enjoy at free time, take it easy

@sir_whocampsalot2876 3 ай бұрын

i also found it odd he didnt google the codes but i also believe in the end it didnt matter and the board needed to be replaced anyway

@RichWhiteUM 3 ай бұрын

@@sir_whocampsalot2876 My guess is that the board's memory slots got borked.

@GregSalazar 3 ай бұрын

The codes were sporadic. 00 = dead CPU if it hangs. 15 = memory training (normal process). 46 = memory initialization error. The codes did NOT tell me much of anything in the moment other than that an issue _may_ have been present with RAM. This was isolated and removed as a variable early in the video. Wouldn't have been a 5 minute diagnosis. Bit silly to claim this in hindsight after watching the video.

@t3mpl3tw3 3 ай бұрын

A new episode of fix or flop, the computer is not the only thing that is bricked right now.

@SirClicks. 3 ай бұрын

Amazing double Enchantra

@h3lldude 3 ай бұрын

@@SirClicks.DOUBLE ENTENDRE

@ixperimental9268 3 ай бұрын

@@SirClicks. double Enchilada

@JDL16 3 ай бұрын

@@SirClicks.Bone apple tea

@simon2dogs 3 ай бұрын

Good job, again, Greg. People should note that fixed is not the same as repaired.

@Fredfox85 3 ай бұрын

So, as soon as you showed the specs of the PC I immediately knew it was the motherboard. I as well was upgrading a few parts in my PC, and when turning on the PC, I was getting the same LED bug. Fortunately, I was able to do a return exchange with Newegg and got it replaced. I was able to test it and now have a working PC. Gigabyte may have a know issue with that version of the motherboard because the new motherboard I received is version 1.2, and the one I returned was 1.1.

@GregSalazar 3 ай бұрын

Interesting note! I had no idea there were different revisions of this board.

@Fredfox85 3 ай бұрын

@GregSalazar the only reason I realized is because I went to do a bios update on gigabyte website they have bios updates for 3 different versions of this motherboard.

@PileOfEmptyTapes 3 ай бұрын

A lot of the time different revisions are just about the WiFi card that comes preinstalled these days, e.g. on this board rev 1.0 comes with an Intel AX210 and rev 1.1 ships with an AMD RZ616 Mediatek job. 1.2 is not yet listed, unfortunately.

@TheSjuris 3 ай бұрын

The issue he had was typical of a bricked bios not a motherboard issue. It had already checked the chip and ram.

@SteveMosetiAliyebarikiwa 3 ай бұрын

does the board have bios flashback? maybe that would fix it@@GregSalazar

@oui_ofc9751 3 ай бұрын

ouch @ 8:40 that processor is not seated flat

@Beary98 2 ай бұрын

Even my wife spotted this! She's built 1 very guided computer lol!

@georgekofinas1057 3 ай бұрын

Hi Greg ! When you installed your 7600X, if you check closely, you didnt mount it good, one side was like abit on the socket plastic, that is why it couldn't turn on :) Peace !

@RybekRybs 3 ай бұрын

Yeah, looks like the OG CPU was sitting in the socket just fine, and if it wasn't sitting in tight before, Greg might have actually warped the socket himself 🤔. That's why I always give any CPU I install a little wiggle to make sure it's sitting correctly in the socket, just like Papa Linus taught

@Peter-W2PMS 2 ай бұрын

I caught that right away! It was clearly not fully seated in the socket. I was practically yelling at Greg through the monitor to fix it. 🙄

@Lemurion287 3 ай бұрын

As a technician, I agree completely with the just replace the part ethos. It works. As a viewer, I do enjoy when you dig into things to troubleshoot on a deeper level because I'm always curious as to what actually caused the problem. Still, this is by far my favorite series you do.

@bearpuf 3 ай бұрын

Hi Greg, I truly appreciate your candidness to what you know and don't know as well as your very thorough diagnostic procedures dealing with these broken systems. I enjoy watching you sleuth through each episosde as you explore as well as teach the process of hardware repair. Thanks

@wesleyschick3841 3 ай бұрын

I definitely would have recommended to try a BIOS flashback to an older version. There's a strong possibility that doing that might have fixed that board.

@qT_p13 3 ай бұрын

Wouldnt be Greg if he didnt forget to flick the switch to "on." Classic Greg.

@maddog2010p 3 ай бұрын

what i love about the series here, is random broken pc's that a common person has and you are showing testing methods on how to find whats wrong with said pc.

@zadekeys2194 2 ай бұрын

I've been in I.T/networking/technical services for over 15y - one of the biggest basic diagnostics he is missing is the diagnostic speaker. No beeps = bad ; long beeps = ram issue etc etc . I'm 95% this is a Bios corruption issue, which is simple to fix, I'm surprised he didn't try it...

@JustTheRat01 3 ай бұрын

i love that fixing vs replacing advice, its such good advice

@aKAOTICsquirrel 3 ай бұрын

Love the series man, hope it never stops

@birden1995 3 ай бұрын

I love your content it's so helpful. It's great to know all the issues you fixed

@chexmixkitty 3 ай бұрын

reminds me when I pushed down on my 3700x to realign the pins. Heard a crunch, but ran perfectly fine lol. I bent the pins because my cpu fell right out of the socket. Pushed the CPU into the socket to align the pins back to stock and amazingly didn't break any pins.

@TheSlimshady955 3 ай бұрын

Thank you for your videos Greg, ive learn so much watching you, keep doing your great work!

@bryans8656 3 ай бұрын

I really like how you explain what you're doing and why. It's like a tutorial and I've picked up many tips from you.

@Justin-eu3yd 3 ай бұрын

this series is so satisfying to watch from beginning to end. this is one of the last pc centric channels i still pay attention to

@SymbianizeLegend 3 ай бұрын

Been watching you for years.. I really learned a lot from you Greg. Keep it up.

@BlackKnight813 3 ай бұрын

Enjoyed the video Greg can't wait for the next ride along.

@lewworthem8483 3 ай бұрын

Greg, Fix or Flop videos are the best. They bring back painful memories

@zhaneoo 3 ай бұрын

seriously i love your vids the most its so awesome and great for teaching yourself

@mfrank86 3 ай бұрын

Great series! Keep it up Greg

@anthonyg9197 2 ай бұрын

hey dude i found this channel last week and i love it lol I grew up around 436 and 50 so i was really loving the fact you are in the O!!! Liked and subscribed!!!

@BowsettesFury 3 ай бұрын

gee thanks YT for no alert. beautiful build, love the way the fans lights up they're exactly what I've been looking for.

@MarkColemanRules 3 ай бұрын

Nice work as usual Greg.

@blademasterzero5295 3 ай бұрын

It’s always a good day when Greg posts!

@KapitanOppa 2 ай бұрын

Totally agree with all you said. My dad also used to worked in the hospital fixing medical equipment and does the same. Relate so much.

@Bunch007 3 ай бұрын

8:39 CPU was not set in the socket properly. You can clearly see it. That's what probably caused the lopsidedness/warping of the socket later on in the video.

@KingRom3K9 3 ай бұрын

i saw that too and came straight to the comments to see if anyone else saw it

@Bunch007 3 ай бұрын

@@KingRom3K9 After watching the rest of video, it wasn't the CPU causing the issue anyway, but yeah, it still wasn't seated properly, thus giving him no signs of life there after he installed the CPU and attempted a boot.

@johncenakiddo 2 ай бұрын

It hurts my soul when he push down the lever

@GamerDave1974 2 ай бұрын

This was a nice looking system man. Loved the RGB layout.

@LegitJoyRL 3 ай бұрын

So far the series is doing well. love the series as always but i hope someone doesnt try to take advantage of the kindness of your heart cuz theres always that one person who mess it up for all.

@stephanhart9941 3 ай бұрын

All X670 boards should still be under warranty and eligible for an RMA. Any DIYer should always save thwir boxes (and socket covers) just in case. It doesn't hurt resale value either. I had a Gallahad clog up, very easy and fast process for the recall. It only clogged because I didn't swap it right away after getting the replacement. It only effected the early units. Mine was a pre-order.

@seanduffey5162 3 ай бұрын

Flash bios may save the board.

@gamerdweebentertainment1616 3 ай бұрын

It's ridicilous how many PCs stop working and then you update bios... works now. Doesn't make sense.

@little0gamer 3 ай бұрын

bios update would have been my first goto considering the symptoms

@hypevisions4242 3 ай бұрын

I agree

@ChristopherM 3 ай бұрын

When the message from the owner said "I just updated my bios and now it won't post" and the title of the video says "bricked pc" , sounds like a bad flash to me. I would have tried Q-Flashing it right off the bat.

@adamtowsley3526 3 ай бұрын

Wouldn’t have fixed the warped cpu socket

@VGShrine 3 ай бұрын

At 8:42 it seems the CPU wasn't placed property in the socket 😮 At 7:30 the original CPU was placed properly but after 8:42 probably the socket got damaged as the CPU wasn't placed properly before securing the bracket.

@GregSalazar 3 ай бұрын

Watch a bit later in the video and you'll see why :-)

@VGShrine 3 ай бұрын

@@GregSalazarat 7:30 the original CPU was placed properly. After 8:42 it seems the socket got damaged as the bracket was closed with the CPU not placed properly.

@dieseldrax 3 ай бұрын

@@GregSalazarPause at 8:43 as you're closing the bracket, the CPU is not properly aligned and isn't sitting fully inside the socket. At 7:35 the original CPU was properly seated before you removed it. Therefore, you installed the CPU incorrectly and didn't catch it until the system failed to power on at all and then, because you missed your mistake, suggested the socket was warped or damaged prior to your mistake. Ultimately moot since the motherboard needed to be replaced anyway, but I was watching you inserting that CPU and yelling "Nooooo" at my screen as you were talking and closing the bracket. However, the main point is that you missed this when you were doing it on video, whether the socket was already warped before that or not is of no consequence. We all make mistakes, unfortunately making mistakes while troubleshooting can end up taking you down a different road if you don't realize you made a mistake.

@VGShrine 3 ай бұрын

You can see the damaged frame at 12:14 in the bottom right corner the frame got warped as the CPU didn't seat properly in the previous installation. At 7:41 you can see the socket without damage before the CPU swap.

@Jacko_486 3 ай бұрын

I was watching the debug LEDs jump from CPU to ram and back, exactly the same issue with my new gigabyte B650 elite/7900X build. Cleaning CPU with IPA and reseating the CPU and it posts! Idling at 27c here in the UK brass monkey weather. Another great vid Greg, keep them coming.

@1nv1c7u5m4n30 2 ай бұрын

The no ram, gpu, boot analysis told me it was the motherboard. 👍 Thanks for your diagnosis reviews. Love ❤️ your content!

@zadekeys8304 2 ай бұрын

Agreed, but he REALLY should have flashed the BIOS... It's a basic troubleshooting step, before replacing the board.

@TheSarduca 3 ай бұрын

Love your show, keep up the good work.

@andrewthornley5172 Ай бұрын

As a technician who runs a business myself, I really respect that you know your limitations. Additionally your comments at the end about the economics of replacement VS repair are spot on. Love your vids.

@GGigabiteM 2 ай бұрын

You may want to invest in an EEPROM programmer and some basic board level rework tools. I've seen an increasing number of motherboards with corrupt BIOS/UEFI firmware, and I've had to get out my programmer to fix them. For motherboards with SPI flash chips (most boards these days use them), you can sometimes get away with one of those clip programmers. But more often than not, you have to remove the SPI flash chip to program it. Other things on the SPI bus can drag down the bus so the programmer can't read the flash chip.

@darthwiizius 3 ай бұрын

My experience in consumer electronics is that repairing devices comes down to what is possible. If, for example, you're repairing an Apple device you can just [cheaply and quickly] replace every part except the main PCB. So sometimes the only option is board work, but most of the time you just the replace the peripheral parts. Lois Rossman would love me, Apple named me in a cease and desist once. We did a repair for an insurance company and the customer sent it to Apple, they stated that not one part that we returned was original. Of course I said that was nonsense, the main PCB was original, hehe, I got the rest [including the case, flexes, LCD etc] from Shenzhen. And I mean the rest. I never did get sued by Apple in the end. 😁

@firexallst4rz277 3 ай бұрын

Great video as always !

@rakitakhan 2 ай бұрын

Nice video Greg ! I loved the "WTF!?!?!" look on your face when the system didn't boot after installing the new mobo. We've all been there.

@giorx5 2 ай бұрын

Fixing the PC is the purpose here, so whatever means used to achieve that is great. Fixing components is one of the ways to do so but not the only one and for sure the most difficult one. Learning with you on broken PCs is useful Greg. Keep it going!

@TimJoe_97 3 ай бұрын

Ay bless, W for the fix G Content as interesting as ever, always a mystery.

@Dudustains 3 ай бұрын

Love these videos !

@gianttrance5180 Ай бұрын

Greg, I enjoy your channel above all other "tech / computer" ones. You show a measured methodical approach to the subject, which can hopefully be emulated by some of your viewers, to show them they can at least have a crack at fixing their own gear. I like that you don't do "WOW" builds, and crazy stuff that just wastes money, and provides nothing to help out the community in general. Thanks for doing these videos, and all the best from an old guy, all the way over the world in New Zealand. Thank you.

@pedrosanchez2352 3 ай бұрын

This one was a good one Greg good stuff mate

@duaneha 3 ай бұрын

Love the videos, very informative, I am a field service engineer in the medical field working on X-ray systems, very cool to hear a little of your fathers background

@ForzaE2 3 ай бұрын

Another great and instructive episode. Thank you.

@GregSalazar 3 ай бұрын

Thanks again for watching!

@MCBuilder 3 ай бұрын

very good video as always, keep going!!

@----.__ 2 ай бұрын

We used to repair the multilayer PCBs on F18's in the early 2000's in the Aussie air force, not because it was cheaper, but it was the fastest and quickest way to get the parts serviceable again. Beyond high intensity environments, or where extremely bespoke/rare parts are required, board level repairs are seldom the most cost effective vector of repair. I got out the air force and in to pure engineering, designing reactors, oil rigs, refineries etc. and in that environment with pretty common hardware (in most cases) for the control systems it was just a throw away society. Siemens, Allen Bradley, Rockwell, Honeywell, all produced exorbitant amounts of hardware where it was cheaper to replace than to repair when something went wrong. I'm lucky to now be working for a large aerospace engineering company designing weapon systems for the MoD and DoD. Almost nothing uses existing hardware and everything needs to be made from scratch besides some rudimentary control. It's a lot of fun, but it sends the cost through the roof. You're extremely wise to be replacing parts instead of fault finding to component level in the PC builders world. If you have to spend more than a handful of hours isolating a fault you're already losing money.

@troyizzo7907 3 ай бұрын

Board repair is so much fun. I love the hunt.

@MGCMorph 3 ай бұрын

You opened this video with the message from user regarding an update. I suspect he updated the bios and has bricked the board..

@aleloAT 3 ай бұрын

gosh i love those rollercoaster videos 😂

@amjadbahnini3759 3 ай бұрын

I love fix or flop , it keeps teaching me stuff, very unique and spicific stuff 😂, but valuable nontheless , like saving my friend from buying a oem prebuilt because i remembered that they usually have proprietary motherboards and powersupplies thanks to your videos! Keep up the good work man 💪

@zekenzy6486 3 ай бұрын

Great Video. Thank you for sharing. Good Job and Nice Work.

@WC2F-Miguel 3 ай бұрын

Great video and yes learning a lot and how to fix it

@timrowe63 3 ай бұрын

Thank You🎉🎉🎉🎉 For putting the SPECS😊

@michaelthompson9798 3 ай бұрын

Like Greg, I always keep a budget end GPU for testing that I know it works ….. used GT710/750 etc are dirt cheap (in many regions) and is a quick diagnostic tool to have on hand. I always have the following spare parts for diagnosing my pc issues (very very very few and minor): - Spare cheap low end GPU….. for me a old GTX1050 😉with no pci-e requirements - Spare name brand working psu 750w (I personally have a higher end 1kw psu for day to day use) - a few Spare SATA cables - a spare cpu HSF (Heatsink & Fan) cooler (as I have an Liquid cooling setup for day to day) for testing purposes only and quick change over when needed - pc screwdriver repair kit (knock off I-Fix-It) which I got for about $15 AUD containing all the screw fittings and hex keys for my water cooling setup. - A spare NVME 256gb and SATA drive (capacity doesn’t matter as long as windows can be installed on it) -My mobile phone or tablet device for internet KZfaq etc troubleshooting tips your not aware of😇👍 - Diagnostic software tools on a USB thumb drive (16-32gb is usually enough) such as anti virus / anti malware detection, memory testing software, DDU GPU software uninstaller to name a few. - Fresh copy of Windows on a USB drive for reinstall (16gb is more than enough) or repairing windows boot loaders etc. Download directly from Microsoft’s website. You can easily scale back your spare psu etc costs dependant upon your pc setup.😁but these are

@tomr3422 3 ай бұрын

I have a GT 730, dont remember what it cost, I think I got it in 2015, Its powered via PCI and a easy check, a old Antec HCH 750 watt psu - and a shoe box of cables. The one thing I love is part of a front panel with a power button. I am a engineer and only dabble in PCs for family and a friends - I like to tinker with stuff- If you got a software issue - I say take it to a profession

@payback_032 3 ай бұрын

Good catch love these videos

@Valfaun 3 ай бұрын

you know, in cases like this where people already replaced components on their own before dropping it off they really should provide both the old and new parts. the systems are handed over in person anyway, so what's an additional box alongside the PC. and it might help with troubleshooting

@danielmorcillotrigo3017 3 ай бұрын

You can see that the original cpu was seated correctly in 7:30 but when he puts in the new cpu in 8:43 it is not full in. I suspect that this could have killed the socket

@Beary98 2 ай бұрын

8:44 My duuude! My wife was even screaming that cpu ain't seated!!!!

@johnt.848 3 ай бұрын

Love these videos.

@Donkies_for_sale 2 ай бұрын

I will say, being this is my PC, seeing how we both had similar thought processes, is comforting. I know we talked about how we both went down the same paths, but i don't think i had enough time for me to explain all I did. I am glad you were able to figure it out though, and I thank you for this!!!!

@Donkies_for_sale 2 ай бұрын

I'm also mad the RGB went back to rainbow. Just a nitpick lmao

@VengeanceFalls 3 ай бұрын

Love these videos…can’t say why but love them.

@stefantudor7494 3 ай бұрын

Greg resolve everything! Grettings from Romania

@jared58974 3 ай бұрын

love the vids!

@TheFloofyPoofy 3 ай бұрын

Im surprised you didnt try re-flashing the bios of that motherboard. Would of been one of the things I would of tried.

@vest816 3 ай бұрын

I think that might've been it. When I saw the memory codes on the board, I was curious and looked them up on Google. The top result was a forum thread of somebody experiencing the same issue, and rolling back the motherboard BIOS version fixed the issue.

@johnt.848 3 ай бұрын

Yeah, noobs think flashing everything is the answer.

@GnostikNataz 3 ай бұрын

I love these kind the most, the ones that make ya think.

@jackieyip359 3 ай бұрын

I think around 8:42 of the video is where the CPU didn't look fully inserted. I caught a glimpse of it but wanted to wait until further in the video to see if anything happened. I suspect whatever happened before was maybe a mistake by the viewer or if it was just a defect of the motherboard. So while not the most expensive mistake, its another good lesson to take the extra 5-10 seconds to make sure the CPU is inserted correctly.

@xos 3 ай бұрын

I noticed it then too, and had that panic moment of, "oh no! That's not in properly!". Funny since I think that would be much harder to spot from Greg's angle, where you're looking more directly down on it.

@Daddy-.- 3 ай бұрын

love these series. should do more videos like this.

@GregSalazar 3 ай бұрын

Well... we have nearly 100 of these videos so far Lol :-)

@soccerguy2433 3 ай бұрын

im still working on your back catalogue@@GregSalazar

@bjammin7d 3 ай бұрын

Right on time with lunch break! 😄👍

@matthijsvandeweerd1415 3 ай бұрын

Have a good lunch break :D

@GregSalazar 3 ай бұрын

Hope you enjoy!

@TheSkepticSkwerl 3 ай бұрын

I was trained in component level repairs. And we replaced the broken board on everything that was still in stock. We only ever replaced components when a machine was too old to have replacement parts.

@xbrunnx 3 ай бұрын

Yep, The Galahad 360 is a good AIO but my pump died on my first one within 2 years, luckily Lian li has great customer service so they sent me a brand new one in just a few days time.

@techluvin7691 2 ай бұрын

Once the memory does train on AM5 you can enable “memory context restore” and “power down enable” in the memory timings section of bios. Along with these, look for “fast boot” in the “boot” section of bios and enable it. Usually doesn’t fast boot until the next restart from a power off condition. It will result in a faster boot…….but not as fast as an AM4 rig.

@TheTechJS 3 ай бұрын

I am trying to start my own little pc business(In and around the Syracuse area 😂) for rebuilding older pc/building/repairing and I LOVE these videos. I just had a dead board on an Optiplex 9020. Luckily, it was just a $25 fix, and I had another happy customer!

@TheTechJS 3 ай бұрын

Woooooo I got a like from the man himself lol. Before I even finished the video. Keep it up man!

@stacyromanchuk 3 ай бұрын

Great video as always Greg! Appreciate it. And there's lots of YT channels that show how to repair boards so if people want to see that they can go watch them. Spread the YT watching love around a bit!

@phenomeenah-yar 3 ай бұрын

I've done that face of frustration before too many times. Very relatable

@nochilltracks 3 ай бұрын

Amazing series greg❤

@GregSalazar 3 ай бұрын

Thanks for watching!

@matthenderson94 3 ай бұрын

This might be the coolest looking system I've seen in any of these videos. (at least in my opinion)

@sgottoboni 3 ай бұрын

Awesome fix.

@TriforceHDify 3 ай бұрын

Always great videos also love the yugioh cards in the back❤

@adams4075 3 ай бұрын

My 3 criteria when I build my first AM5 system are as followed. (1) Wi-Fi 6 or better (2) PCIe 5.0 for gpu and top m.2 (3) usb 3.2 10Gb preferably with type A (I already have 10Gb compliant usb A to C cables and C to A converters 10Gb compliant.

@waynerowlinson6177 3 ай бұрын

Frustrating scenario for sure. True story: About 10 years ago my wife's AM3+ system quit working. I didn't have a replacement motherboard, but did have everything else. I swapped out every part one at a time... EVERY part, and used a known good power supply and it simply didn't work. Fast forward to a couple about 3 weeks ago - I was cleaning out a room in the basement, and there sat her old case with the motherboard still in it. Nothing else. I slapped a couple components in it, hooked it up, and voila - it works! It is now my "new" home server system. I stress tested it for a few days before swapping everything over, and it has been running as a server flawlessly for a couple weeks as well. I think that is the longest troubleshooting timeframe I've ever had 😀

@shanenorman7262 3 ай бұрын

I work for a major imaging company. I agree , the longer the system is down the more money it costs the customer. Identifying the problem to a component/ board unit and replacing the high level component is the most cost effective solution.

@ibeebzz9804 3 ай бұрын

That’s an odd one there, however fwi I wouldn’t adjust core voltage as when you do pbo will likely be disabled. High idle voltage is common with pbo which is enabled by default.

@johnpaulbacon8320 3 ай бұрын

Great fix.

@xero5727 3 ай бұрын

Spoken like a true technician: Fix the problem by removing the problem.

@CiTRU5 3 ай бұрын

Did you swap the CR2032 battery? I've seen some WEIRD shit happening because of the battery being dead/sending the wrong output voltage.

@RainyFox-ot9qn 3 ай бұрын

he does check those sometimes, even voltage with a meter.

@CiTRU5 3 ай бұрын

@@RainyFox-ot9qn yeah, I know; but didn't see Greg doing that with this one ...

@daponagegoogenburg807 3 ай бұрын

Great vid as always, someting i only saw this vid were the graded yugioh cards in the background, what cards are there?

@Pc_OhKay 3 ай бұрын

Literally just went through this 2 days ago with brand new parts from micro center. Happened to be a faulty motherboard from the factory. Good thing the parts were just purchased and I was able to exchange it with no problem.

@joshthebutchergibson3218 2 ай бұрын

Are those Pokemon cards framed in the background? You should do a office tour video and show us your stomping grounds!! Great content as usual man thanks for sharing!