Рет қаралды 4,288
Well, I've got it working, or at least done a temporary fix. At first I thought it was a couple of "micro-switches" that sense when the tape draw is shut. They were bad and needed attention but that wasn't the only problem. Some of you suggested that it is a bad belt causing the trouble, I thought the belts were okay at first because they all SEEM good, not stretched or turning to goo or anything like that, but the belt connecting a motor to a pulley that selects the different modes did need replacing, even though just like the others it looked okay and felt tight enough. For now I've just used a rubber band and it does work, but I WILL replace that with a proper belt when I can find one.