No video
Fixing Your RIB Boats Tube's When They Start To Peel Off The Transom Area
Рет қаралды 19,736
Күн бұрынOn this episode of INFLATED!!!
In this episode of INFLATED, I'm going to show you how to fix the tube's on your RIB boat when they peel off at the transom area. This repair isn't for everyone, but if you do and try attempt it? Here's one way of doing it.
Thank you for watching!!!
Like if you enjoyed the video. Subscribe for more future content!!!
For sponsorship, partnerships or support contact us at gashopperinc@hotmail.com
For merchandise, parts, boats and more, visit our website at www.gashopperinc.com
music by audionautix.com
@LinusWilson Жыл бұрын
I like the ratchet straps idea
@jpropst81 6 ай бұрын
Would HH66 work for adding D rings and accessories? I would like a professionals advise.
@gashopperinc 6 ай бұрын
I wouldn't recommend it all. It's not a structural glue Adhesive, personally we never use that stuff here. Mainly used for vinyl repair like rubber pool toys or like materiald, not for PVC or Hypalon. Failure rate is to high. Would recommend Z7096 from Zodiac or Stabond UK-148 for PVC and Z7098 Zodiac for Hypalon.
@grantar2 5 ай бұрын
I know this an old video, however if your still answering questions. What grit are you using on the Dremel and orbital sander?
@gashopperinc 5 ай бұрын
Using bthe course grit bit on the dremel, and sandpaper for the Orbital is either 120 - 180.
@grantar2 5 ай бұрын
Thank you very much for the response. @@gashopperinc
@dorothylimbrick9573 Жыл бұрын
I have a POS JP Marine rib boat that is completely coming apart. What should I use to completely remove all the glue and what will the best glue to remake the whole thing over.
@gashopperinc Жыл бұрын
MEK and lots of patience for cleaning old glue away. Zodiac or Stabond UK-148 for reglueing.
@alangoodwin7605 2 ай бұрын
What type of glue or brand are you using
@gashopperinc 2 ай бұрын
I mainly use the Zodiac brand for glue repair, but if there is a shortage, I'll use Stabond or Weaver 2 part glues.
@krishartsock6843 2 жыл бұрын
I would like to know what you used to clean/clear away the old dirt and glue. Was this a pvc or hypalon boat and what glue would you suggest?
@gashopperinc 2 жыл бұрын
Dremel with ginding stone, MEK and some elbow grease.
@shaunheaton9749 2 жыл бұрын
What kind of glue do you recommend? where do I get it?
@gashopperinc 2 жыл бұрын
z7096 plastomere glue if pvc or z7098 elastomere glue if hypalon. can get at an zodiac dealer.
@Spaceghost1234 Жыл бұрын
What glue did you use?
@gashopperinc Жыл бұрын
Depends on the fabric... Zodiac Z7096 or Stabond UK-148 for PVC or Zodiac Z7098 for Hypalon
GasHopper Inc
Рет қаралды 7 М.
XS Ribs & BMC Ltd
Рет қаралды 80 М.
GasHopper Inc
Рет қаралды 30 М.
GasHopper Inc
Рет қаралды 7 М.
Love Life, Love Boat
Рет қаралды 4,2 М.