How to Make a Light Bulb Lamp

No video

How to Make a Light Bulb Lamp - DIY Lantern Lamp

Рет қаралды 203,125

Күн бұрын

How to Turn a Light Bulb into a Lantern Lamp.
SUBSCRIBE HERE ➜ / @fixitsamo
MORE VIDEOS HERE ➜ / fixitsamo
WATCH OTHER VIDEOS:
- Automatic Light Sensor Switch: • DIY Automatic Light Se...
- Dryer Filter Fire Prevention: • How to Clean Your Drye...
- 6 Hacks & Crafts with Plastic Bottles and Soda Cans: • 6 Hacks & Crafts with ...
- How to Unlock a Phone with a SAUSAGE: • Unlock a Phone with a ...
- DIY Mini Air Compressor (Air Pump): • How to Make a Mini Air...
- How To Clean Battery Terminals Corrosion: • How To Clean Battery T...
- DIY How to Fix a Rear Flat Tire: • DIY How to Fix a Rear ...
- How to Fix Clean Iphone Charging Port: • How to Fix Clean Iphon...
- How to Open a Locked Door Without a Key: • How to Open a Locked D...
- DIY Easy Parachute: • How to Make a Parachut...
- DIY Bladeless Fan: • How to Make a Bladeles...
- How to Open a Locked Door Without a Key: • How to Open a Locked D...
- How to Bend Acrylic & Plexiglass: • How to Bend Acrylic an...
- DIY Soda Fountain Machine: • How to Make Soda Fount...
FOLLOW US:
FACEBOOK ➜ / fixitsamo
PINTEREST ➜ / fixitsamo

Пікірлер: 112

@Katya-zj7ni 3 жыл бұрын

Talk about a light bulb moment! I’ve spent days looking for the “chimney” component for my DIY lamps and never thought of a lightbulb . You’re the man !!❤️

@user-wf2el3ri6u 2 жыл бұрын

Главное показали что и как можно сделать из того что может оказаться на свалке ! А дальше можете дополнять свою фантазию ! Кто на что горазд ! Браво мастеру !

@lesliemiller5790 Жыл бұрын

and, if your name is Angus Macgyver, you would save the filament wires to be able to pick the lock on your cage. LoL. this is a great way to repurpose/reuse light bulbs. Like another writer stated, use a dremel tool to help make the hole so you can make a neater and smoother hole.

@user-pi8vt7ut3n 2 жыл бұрын

... отличная идея, жаль , что нету регулятора освещенности, и выдержки ли нагрева колба лампы, попробую повторить, авось получится, молодец, что показал, здоровья тебе и удачи во всём, новых творческих успехов!!!

@jupiterfive1331 5 жыл бұрын

Instead of using the sandpaper to that degree you could use a dremel with the appropriate stone attached to widen the hole as soon as it becomes a dot, or use the dremel from the beginning, in this way there isn't a large area of sanded glass that looks cloudy at the top around the hole and detracts from the appearance, also it can make a nice smooth rounded hole.

@googacc4654 3 жыл бұрын

Stickers or tape cut into stars or hearts or whatever then sand the whole bulb could be fun

@lanaholmes7098 Жыл бұрын

What dreamel bit would you need for that? I've got all kinds just wondering what the bit is called.?

@jupiterfive1331 Жыл бұрын

@@lanaholmes7098 Silicon Carbide grinding and polishing bit. They come in different sizes and shapes.

@pattiannepascual Жыл бұрын

It's a pretty lamp! how long does that alcohol last? I think I will try with k1 kerosene instead of alcohol,since it's $11 gallon where I live in North NJ USA.Alcohol very expensive here. The lamp wick is perfect for kerosene but won't work with olive oil.i have tried many times to experiment,but maybe a 100% cotton wick from a mop would work with used oil. For those of you that can't afford alcohol or kerosene. People throw lamps away all the time,you can take those apart instead of buying parts.

@Godkey1 16 күн бұрын

Lamp oil is much safer than using rubbing alcohol in this design anyways!

@eduardoosvaldogonzalezperi5996 2 жыл бұрын

Muy bueno! La parte mas dificil es la del vidrio de la lampara es muy fino y delicado , hay que tener paciencia y delicadeza, ( usar guantes) para la terminacion del agujero, lo mismo, gracias.

@escapetherace1943 Жыл бұрын

Cool, I think a small stubby bottle would work well too, maybe be a bit sturdier

@stanislavvasyliev3899 2 жыл бұрын

C'est vraiment génial!!! Отличная идея, спасибо, что делитесь! Однозначно лайкос!

@fixitsamo 2 жыл бұрын

Merci

@davidgabriel5677 2 жыл бұрын

Super idea i highly appreciate this gentleman thank you many times David Sir Srilanka

@siouxsiesiouxwilson7247 Жыл бұрын

Brilliant as i NEED Lanterns here! Awesome and Thank you

@tonysony1351 5 жыл бұрын

OMG dude you’re a genius love the idea amazing

@kalthoumbaraket3539 3 жыл бұрын

فكرة. جميلة. وممتازة. تسلم. الأيادي

@jejejjgh6493 Жыл бұрын

Wow very smart ❤❤❤❤

@shivanshtripathi6318 4 жыл бұрын

Thnkyou So much sir ! I'm just gonna make it for the vertical of Diwali :)

@carlosguerra6649 3 жыл бұрын

Boa noite, ótima idéia, já perdi três lâmpadas, no final, quando abre o orifício, trinca, as lâmpadas, eram pra artesanato, mas vou continuar tentando, quem sabe acerto. valeu, gastei três folhas de lixas, mas, vou fazer.

@jivanete1530 Жыл бұрын

Vc é um gênio!

@Moneysaver001 Жыл бұрын

Seems that no matter what the device or product, Some one somewhere is hacking it. That's hope for humanity. I love it. Thank you for sharing this video.

@leovasquez3326 Жыл бұрын

Excelente trabajo 👍 me encantó

@neverask4271 5 жыл бұрын

I really love t!!!Bravo from Greece!!!:))

@fixitsamo 4 жыл бұрын

Thank you :)

@kingdommusical 5 жыл бұрын

beautiful and smart idea .!!!

@marcossanto4252 Жыл бұрын

Muito bom mesmo 🇧🇷

@damianvallejo1699 7 ай бұрын

Que buena lampara

@williamtsol636 5 жыл бұрын

Way cool ! Cheers !

@scli301 Жыл бұрын

Very good lamp, Thanks

@user-lc8rw7rz1e Жыл бұрын

Молодец, мастер!

@lanaholmes7098 Жыл бұрын

Wow, Thanks for my next project.

@SaintTrinianz 3 жыл бұрын

Very clever, great demonstration, thanks!

@fixitsamo 3 жыл бұрын

Thank you

@LeeShaneREALTOR Жыл бұрын

very creative, have you tried lamp oil or ther less famible fuels, in theroy it should work and be safer

@trancongthao4735 3 жыл бұрын

You are Number One.. Thank you about your video !

@francy2174 Жыл бұрын

Ma quando si consuma lo stoppino bisogna aprire ogni volta e tirarlo su?

@Godkey1 16 күн бұрын

First of all I like your idea of making a lamp out of an old light bulb and the result is very pretty and functional. Well done at that part. BUT there is a HUGE SAFETY ISSUE WITH USING RUBBING ALCOHOL (99% Isopropanol aka IPA 99.9%) Please do not suggest to use rubbing alcohol in this design to your viewers. Rubbing alcohol is pretty dangerous to use in such a lamp. Because isopropyl alcohol is considered a highly flammable liquid. It has a flash point of 53°F, which means it can catch fire very easily and ignite at a relatively low temperature. It will burn even without a wick and the alcohol vapors could also explode in your lower glas reservoir. A MUCH SAFER alternative would be to use a very clean LAMP OIL because it has a much safer flash point *(usually flash point of lamp oil is between 130-150° F) and it normally can not burn on its own without a wick. Also on safety it would be better to use a pretty thick round wick in this design because that would prevent the liquid from leaking out in case you accidental bump over the lamp.

@georgezertuche3551 Жыл бұрын

Cool I like it but when it burns out the tip how do you keep it burning do you pull it out again with something it dont rise on its on right

@capitaldd3693 3 жыл бұрын

Does the glass break from the heat - seems like.itd get pretty hot. Those bulbs seem fairly thin. Great idea, thanks for posting

@davids7209 3 жыл бұрын

Ever try touching a normal bulb that's been on for any amount of time? A 60 watt bulb will typically reach 2900-2950 C

@dancoulson6579 Жыл бұрын

Very unlikely - An incandescent lamp is designed with glass that's engineered to tolerate the high temperature of the tungsten filament glowing white hot.

@anouarbelmouden2743 2 жыл бұрын

فكرة رائعة

@pattiannepascual Жыл бұрын

shouldn't the lid have at least a small vent hole in it?

@meminapenafiel6245 2 жыл бұрын

Muy bonita su idea

@farfallafarfallina3503 Жыл бұрын

Hermosa!!❤

@jreeder6168 Жыл бұрын

There are some clever people on here.

@feliciageorgeson5556 Жыл бұрын

How about carbon monoxyde

@leventisler7444 Жыл бұрын

Ahh😂kavnoz ve ampul dışındaki aparatları bulabılsem 😂❤

@kurinjikurinji6745 3 жыл бұрын

Wonderful idea, bulb hole super.

@fixitsamo 3 жыл бұрын

Thank you

@deskmark Жыл бұрын

If you want to burn heavier liquid fuels: Buy a carbon felt welding blanket. Then cut a strip for a Wick.

@barrykelly2722 2 жыл бұрын

Very genius idea. Excellent. Just two concerns. 1. How does one stop the wick from burning? Quenching the flame. 2. The globe would logically become too hot to touch. I've got boxes of burned bulbs and plenty of glass jars. Guess I have my work cut out for me.

@fixitsamo 2 жыл бұрын

Thank you you can simply blow on it to turn it off as i showed at the end of the video Use 100 or 120 watts light bulb so it could resist a lot of heat

@sarakalifa-jk9de 7 ай бұрын

رائع😍😍😍

@nildayonson9130 2 жыл бұрын

I like it..thank you..

@onejanedoe2003 2 жыл бұрын

Just wondering, what keeps the flame from overheating the lightbulb?

@Br1ckInTh3W4LL 2 жыл бұрын

The glowing white-hot filament of an incandescent light bulb is probably even hotter than the lamp flame that is replacing it.

@cesarbarros8022 3 жыл бұрын

Muito bom!!!....👏👏👏👏👏👏

@_Sho_oK 3 жыл бұрын

Very useful idea!

@fixitsamo 3 жыл бұрын

Thank you

@stigmamax9996 Жыл бұрын

Excellent.

@antoniomaldonado5319 3 жыл бұрын

Amazing,dear friend & congratulations.

@fixitsamo 3 жыл бұрын

Thank you

@kp724 4 жыл бұрын

Отличная идея за дёшево! главное найти подходяший патрон для лампы и нудную лампу

@udeeshamithun4943 2 жыл бұрын

It's interesting. wow !

@jayoppie3021 5 жыл бұрын

Nice how clever!

@Helenfromeugowra 5 жыл бұрын

Great recycling

@richardwasserman 3 жыл бұрын

Very cool project. Does the inside of the globe soot up with use? Did you try using a torch to melt the edges of the top hole?

@fixitsamo 3 жыл бұрын

Thank you No No Lol but i suggest enlarging the circle 2 to 3 mm more if you have bigger 🔥 The size of the circle that i made was around 1/4 inch in diameter

@oliveracucuz2352 Жыл бұрын

Good job

@onejanedoe2003 2 жыл бұрын

Also, how much burning time does the lantern lamp have? Is alcohol the only accelerant that can be used?

@fixitsamo 2 жыл бұрын

I used alcohol because its the cleanest the quantity that i used lasted around 3hrs usually a 60 Watt light bulb could generate a lot of heat 100 or 120 watt light bulb could resist even more high temperature

@12alien12 2 жыл бұрын

very cool

@cfrefrigeracao7320 5 жыл бұрын

Aqui no Brasil essa lâmpada incandescente está em extinção, muito difícil achar

@pattiannepascual Жыл бұрын

maybe cut the bottom off a jar ? or just leave the top off. it's still a nice lamp without the light bulb.

@cfrefrigeracao7320 Жыл бұрын

@@pattiannepascual great ideia. Danke

@hamidkhurshid7492 3 жыл бұрын

Very nice

@nalindajayalath2335 2 жыл бұрын

සුපිරි

@Rosa-mb5yp 3 жыл бұрын

Amazing! Thank you for sharing!

@fixitsamo 3 жыл бұрын

Thank you

@MrJustapeon 5 жыл бұрын

Cool.

@Ayouma308 2 жыл бұрын

wow this is good ❤

@MrZee2014 2 жыл бұрын

Nice 👌

@dawndixon2408 Жыл бұрын

None of their business. If I give my child $50 it is no one’s business.

@petermacdonald9076 Жыл бұрын

Like it

@emmanuelappeadu873 3 жыл бұрын

I am planning to do one an abandoned gas cylinder

@ancientruby7116 2 жыл бұрын

Can you make me one of these and i pay you? I am old and do not have a drill or can use one? Thank you

@joyowon1 3 жыл бұрын

Wow

@bonnieheikkila4781 3 жыл бұрын

Are you using rubbing alcohol because kerosene is to hot

@fixitsamo 3 жыл бұрын

Yes rubbing alcohol

@meytiakkas6428 2 жыл бұрын

👍👍

@5phutsangtao-iQ 3 жыл бұрын

💁👍🙆❤️

@wadnabella1423 Жыл бұрын

OK Thank's ,BUT ..... WHere is the smoke going ? It is Toxic? Does it darken the environnement ? No one talks about it in the videos .

@tonysony1351 Жыл бұрын

He used 99% alcohol No smell or smoke restaurants use it all the time you can poor it in small can to heat food

@lucialima781 Жыл бұрын

Show

@ciragarcia 2 жыл бұрын

👏👏👏👏👏👏

@fixitsamo 2 жыл бұрын

Thank you

@Speeglelookingglass Жыл бұрын

Way beyond my skill level. Real cool, but I would buy one from somebody so that I wouldn't have to make it.

@adamthompson626 2 жыл бұрын

dont breath that glass sand in. that aeriously bad for you.

@jimreynolds5967 Жыл бұрын

way to much time on his hands.....cool though

@user-ly7rg9hb4r Жыл бұрын

ისე აანთე რათ უნდა ნათურა

@hareeshshetty892 3 жыл бұрын

ಬಾರೀ ಎಡ್ಡೆ ಉಂಡು, kerocin oil ಡ್ try ಮಲ್ಪುಲೆ 😂😀🙏

@TheFrog767 3 жыл бұрын

🤔💡👏👏👏👏🍻

@fixitsamo 3 жыл бұрын

Thx

@pravoslavn 3 жыл бұрын

Nice job, nice video ! But please practice speaking without saying "gonna" in every sentence. It sounds somewhat uneducated to talk that way, because "gonna" is not even a word. Instead of saying, "I'm gonna make a hole," say "I will make a hole." American schoolkids say "gonna" a lot because they are too lazy to inflect the verbs properly, and their lazy teachers do not correct them... it sounds awful. My guess is that you picked up "gonna" from them. You do nice videos... Keep up the good work !