What’s Inside This Floating Shelf!?

Рет қаралды 561,193

Жыл бұрын

I built sleek & strong diy floating shelves, well really just one floating shelf with hidden LED lights for my office.
🎥 What to Watch Next:
DIY Floating Shelves with a Secret - • DIY Floating Shelves w...
Building an 11 Drawer Office Cabinet - • I Made an 11-Drawer Ca...
My Tech Gear was a Mess so I Built This - • My Tech Gear was a Mes...
I Bought a $70 "Domino" on Alibaba - • I bought a $70 "Domino...
➤Plans from this build:
Modular Garage Cabinets bundle (Save 30%) - fixthisbuildthat.com/garageca...
Sturdy 2x4 Workbench - fixthisbuildthat.com/sturdy2x...
➤Join the FTBT Builders Club!!! bit.ly/2abkaSV
More content, early access, FREE plans, video credits
➤Tools/Supplies Used (affiliate):
ISOtunes Bluetooth Hearing Protection - bit.ly/2Ru4Es8 (10% off code: FTBT)
TotalBoat Halcyon Clear Poly - bit.ly/3lqRON1 (5% OFF at checkout)
Kreg Track Saw - amzn.to/2HeTyDt
Kreg Setup Bars - amzn.to/3AD7bps
3D printer - bit.ly/41TyKHn
3D Printed LED Mounting Rails - www.printables.com/model/4664...
PLA filament - bit.ly/42bsf2o
FCOB LEDs - amzn.to/40RPnSq
FCOB LED controller - amzn.to/3oQY02e
12v power adapter - amzn.to/3oYpPpd
RGB LEDs - amzn.to/3oUv1dW
RGB LED controller - amzn.to/3n8EJsN
5v power adapter - amzn.to/3LGouML
Soldering iron - amzn.to/3LFw763
Milwaukee Trim Router - amzn.to/427JuSa
Drill press attachment - amzn.to/3VpYBUL
Stud finder - amzn.to/3HN9drp
Wood Owl auger bits - amzn.to/3ng8PdH
Self-centering dowel jig - amzn.to/3Nqep83
½” extended length drill bit - amzn.to/3LgR0TL
Low voltage wall plate - amzn.to/41PT5NK
➤Support the FTBT Channel:
Buy FTBT Woodworking Plans: fixthisbuildthat.com/plans
Buy FTBT Merch: bit.ly/2YgiHnd
Links to My Tools & Gear: bit.ly/FTBT-tools
Subscribe: bit.ly/FTBT-youtube
➤Thank you to these partners for supporting our channel. Go check them out!
Kreg Tool: amzn.to/2FXZIGp
ISOtunes: bit.ly/2Ru4Es8 (10% off code: FTBT)
TimberlandPRO: bit.ly/2Zm1r1n
Woodcraft: bit.ly/2qP7JIs
➤FOLLOW FTBT on Social Media:
Instagram - / fixthisbuildthat
Facebook - www. ibuildthat
Twitter - / fixthisbuildtht
Pinterest - / fixthisbuildtht
➤Referenced people/videos:
Alexandre Chappel - Floating Shelves • How To Make Super Stro...
Music Licensed through Epidemic Sound - Get a FREE month: bit.ly/3qCwWiW

Пікірлер: 410

@Fixthisbuildthat Жыл бұрын

Get woodworking plans for successful easy builds! fixthisbuildthat.com/plans

@SailorRalph Жыл бұрын

I just want to point out that your comment on the LEDs is the difference between warm white light and cool white light. All colors have a warm and cool variation. When it comes to in home lighting, especially wood, we all tend to prefer warm colors.

@jayblanchard4477 Жыл бұрын

One of the things you might want to consider is making a "V" groove for the LEDs. You can then mount the LED strip facing away from you. You still get plenty of light, but it isn't aimed in such a way that you would get the LEDs shining into your eyes. Love your work! Love your positive approach!

@rasmidtan Жыл бұрын

that's a great idea. how much angle are we talking about here? ~20°?

@jayblanchard4477 Жыл бұрын

@@rasmidtan I have used both 60° (giving a 30° angle) and 90° (giving a 45° angle) router bits to do this. You could also cut a groove with a table saw to get any angle you wanted. If you were really adventurous, you could cut the groove, mount your LEDs and then do an epoxy poor to seal them while providing some diffraction. I have not tried that...yet.

@fire_fux Жыл бұрын

You should make a video showing us how. Sounds interesting but I personally need a visual representation or hands on to grasp a concept. I can't really conceptualize what you mean.

@timsawyer9231 Жыл бұрын

I was thinking the same thing when he was doing it. I was working on the lights in a really nice store, and that's how they had the LED's setup. It's clever. and looks super clean.

@TooManyProjectsWorkshop Жыл бұрын

A good majority of LED strip's have a 120 degree beam angle, so a groove at 60 degrees cast light directly down at the front and wash everything back toward your wall (depending on the height of the shelf). Could also go a little less, say 55-58 degrees, depending on the shelf height to help wash toward the front edge of your bench. I used to work designing architectural lights that's how we would design cabinet shelf lighting.

@juliojimenezhbl Жыл бұрын

The think I like the most about your videos is how happy and proud you are of yourself after something workout exactly as you planned. Excellent built 💪🏼💪🏼

@Fixthisbuildthat Жыл бұрын

I appreciate that! Gotta have fun while you're building :)

@sustrasbk Жыл бұрын

For LEDs, you might want to also look up sk6812b led strips. They are proper RGBW, meaning there's the usual RGB leds plus an additional dedicated proper white LED

@RobDucharme Жыл бұрын

I'll always take the time to watch floating shelf videos. The more I watch, the better equipped I can be when making them..

@Fixthisbuildthat Жыл бұрын

hope it helps!

@TeddyWalla Жыл бұрын

Brad you are an inspiration. Thank you for leveling up your previous project and detailing all the steps. True pro!

@Fixthisbuildthat Жыл бұрын

You're welcome!

@SoHighIFly Жыл бұрын

A good way to cool your drill down is actually just holding the trigger down while theres no load (just not drilling) The cooling fan on the armature will cool the motor down quick and efficiently. A lot of power tools fail due to them getting hot under high load and then just placed down, letting the motor sit there in hot air weakening the varnish. It needs cool air to be pulled through it. Putting it in front of a fan helps but it doesnt cool the internals as quickly as the armature fan would.

@Fixthisbuildthat Жыл бұрын

huh, never thought of that. great tip!

@maidsandmuses 5 ай бұрын

Indeed, that is what I do when my SDS drill gets a bit warm; disengage the hammer action, remove the load and drill bit, and run at full speed for a minute or so. Another problem is that some drills don't have a good second handle to get a firm grip; some folks accidentally grasp it with their hand covering the ventilation slots.

@ro63rto Жыл бұрын

For the task lighting, I have used an aluminium extrusion to mount the strip to. This help disapate some heat to help prolong the life of the strip.

@Fixthisbuildthat Жыл бұрын

yep, aluminum channel is another good alternative

@AGRFABRICATIONS Жыл бұрын

@@Fixthisbuildthat it is the only right solution (plastic is not right) to be fair . Love the work you do anyways !

@GeorgeMinton-jb8ky Жыл бұрын

You are a next level Woodworker. Lots of detail and extra non woodworking electrical skill. Thanks for the show.

@robertkerby2581 Ай бұрын

Wow, you built an exceptionally awe-inspiring shelf that is straightforward and I believe, "achievable for me"! You were right to trust you wife's opinion on the selection of LED lights! Well done, Brad!

@JUSTTRYITDIY Жыл бұрын

great work love the dual LEDS. We are getting ready to remodel the office this summer and this will have to go on my list to do!

@TooManyProjectsWorkshop Жыл бұрын

Awesome project. In future you might consider sticking your LEDs to a strip of aluminium and allowing a little airflow to get behind the aluminium. The strips can generate a decent amount of heat, moreso if theyre behind a lense or cover, and that can cause the adhesive to fail or over time.

@bluecurlygirl Жыл бұрын

Love this build. The lighting is fabulous. Defo a level up. Great job.

@Fixthisbuildthat Жыл бұрын

appreciate it!

@strangerofthe2067 Жыл бұрын

I work with a lot of LED lighting in residential and commercial settings and the majority of products I use come from GM Lighting. Highly recommend their products. They have a very wide variety of different kinds of LED lighting & drivers and a lot of other cool products as well. They have a nice website as well as a KZfaq channel that showcases some of their stuff. I usually install aluminum channel recessed into the shelving with a diffuser for stuff like floating shelves, and use a 120v to 18/24v dimmer driver switch that installs like a normal switch in a wall, no transformers to hide in cabinets, just run some 18-2 from the dimmer driver switch directly to the shelves. GM also makes a nice LED strip with the diodes aimed at 90 degrees so you can place the strips on the underside of a cabinet and have the diodes aimed at the backsplash instead of straight down. Cool video, I love watching stuff like this to see tips and tricks from other people in the trades! Edit- ok I just got to the part where you added the channel and diffuser as well! Nice! Looks good! 😂

@loribrooks6736 Жыл бұрын

Absolutely LOVE this! Also love that you experimented with making your own jig…love your videos and channel!

@Fixthisbuildthat Жыл бұрын

thank you, Lori!

@Kosh42EFG Жыл бұрын

Gotta love the Omnifixo... Best gadget ever for soldering.

@mystproductions4099 11 ай бұрын

Little thing but props to giving credit on the square tip for the rods. I didn’t see the original you mentioned but it’s nice to see people give credit to other creators in a world of stealing content.

@poopee6314 Жыл бұрын

You just have to love it when a project works out without a problem.

@johnmullen478 3 ай бұрын

Nice build. Electronics are always a mystery--good to see an example. I have the same milescraft drill guide. You can take the spring off--allows the drill to go deeper.

@TheAnimeist 4 ай бұрын

So well done, both the product and video.

@RC21114 Жыл бұрын

Great project, Brad. Tell me about the soldering 3rd hand setup. Can't find it in the "tools" section. Where'd ya get that? Looks cool!

@Fixthisbuildthat Жыл бұрын

Omnifixo.com 👍

@befmx31 Жыл бұрын

Super job on the shelf.

@MrJramirex Жыл бұрын

The final result looks amazing. One big warning, though. Drilling more than 1" into any stud can be very dangerous and very expensive. Plumbing and electrical could be there. In newer construction, you will likely hit a steel plate first. But in older homes, you will not have that luxury.

@frenchyroastify 5 ай бұрын

That is a solid point. Good catch.

@legionjames1822 5 ай бұрын

beautiful build. nice shape, understated, very solid, nice color. Im super into these shelves

@randallfetty2991 Жыл бұрын

I like how you broadly cover the details...even the gotchas and mistakes lol. Give me confidence in trying some of the projects out. Thanks!

@Fixthisbuildthat Жыл бұрын

you're welcome!

@michaelkolozsvari3575 Жыл бұрын

Love the use of the doweling jig! The project looks great, and can't wait to see the follow up video!

@Fixthisbuildthat Жыл бұрын

thank you! next vid should be fun

@bashed68 6 ай бұрын

I did some similar shelves. I made my own doweling “jig” for the wall holes out of red oak (firewood) because it’s really hard. I used my table saw to carve out a block about 3” x 3” x 8”. I drilled a hole through it on my drill press so that it was perpendicular. I held the block vertically on the wall. Worked perfectly. It was amazing how many times there was a drywall screw in the way! What are the odds?!

@karinday7445 Жыл бұрын

Ok is that the coolest ever and I appreciate that you are transparent about the hiccups and work arounds Love it Brad !

@Fixthisbuildthat Жыл бұрын

thank you!

@playamytrumpet 8 ай бұрын

As always another fine video. Thanks for sharing.

@zukaesb8473 Жыл бұрын

Can’t wait for the full setup. Great work!

@Fixthisbuildthat Жыл бұрын

coming soon!

@jefftokaji6460 Жыл бұрын

Well done, Brad. Enjoyed the video very much along with your enthusiasm. Inspired me to try this out one day.

@Fixthisbuildthat Жыл бұрын

thanks!

@JasonGrissom Жыл бұрын

Awesome build Brad! I'm in need of building some floating shelves as well. This is just the inspiration I needed. Thanks!

@Fixthisbuildthat Жыл бұрын

Good luck on the build!

@michaeloberle272 Жыл бұрын

I did almost this exact project, (well except for the rgb leds). I had a 8 quarter slab, milled it and cut it down for floating shelves. I bought welded hangers or brackets though that screwed into the studs. The advantage there is you don't have to worry about drilling perpendicular to the wall or parallel to the floor. You can either route a groove into the back or cut out the drywall, so you don't have a gap between the wall and the back of the shelf. I would recommend these brackets. It's easy to slightly angle them up to compensate for the drag from the weight of the shelf and what it is supporting. I chose to use a community woodshop and a drill press, all though I will say that, that method was also a PITA. Drilling that deep into solid maple entailed changing bits, lowering the drill press table and then re-checking that the alignment wasn't off. This is because the table lowering mechanism didn't keep parallel itself. So, all this is to say, go with FixThisBuildThat's method. Buying the drill jig is worth it. And you could consider clamping it to the board between bit changes. Great work. Happy shelving.

@Fixthisbuildthat Жыл бұрын

Yeah, brackets are a good option too

@sapelesteve Жыл бұрын

Fantastic build Brad! Great use for that doweling jig & I will be using that myself! Thanks! 👍👍

@Fixthisbuildthat Жыл бұрын

thanks, Steve. It worked way better than expected!

@FrankPSF 9 ай бұрын

Quite a handsome shelf!

@johnmooney9016 Жыл бұрын

Great build Brad, super strong!

@Fixthisbuildthat Жыл бұрын

thanks, John! they are defintiely stout

@kenklingler5533 Жыл бұрын

Wow, you really stepped up your game with this shelf project. Way to go dude!

@BrianBoniMakes Жыл бұрын

Wow that really turned out nice! Your giving credit to Alexandre is commendable, we're a community!

@soithascome2this 6 ай бұрын

looks great

@swissfreek Жыл бұрын

13:30 those little crimp connectors that the COB LEDs come with look so convenient!

@Fixthisbuildthat Жыл бұрын

They're pretty nice

@johannschnaider358 Жыл бұрын

Nice job, bro.

@Fixthisbuildthat Жыл бұрын

thanks!

@jimrosson6702 Жыл бұрын

Very cool turned out great

@MickelMart Жыл бұрын

That looks awesome!

@Ribby00 Жыл бұрын

Looks fantastic!

@Fixthisbuildthat Жыл бұрын

thank you!

@BouchTube Жыл бұрын

Great job man that looks awesome!

@aliwooz913 11 ай бұрын

wow that was awesome, great work man!!

@Ding_Bat Жыл бұрын

The first rule of Idiots With Drills, is you don't talk about Idiots With Drills...

@noahbaetge4478 Жыл бұрын

OMG... crossing the clamps like that is BRILLIANT!!! Totally stealing that. haha

@robinallen6716 Жыл бұрын

I’m the wife of a woodworker and I really enjoy your video! I will share with my husband!

@Fixthisbuildthat Жыл бұрын

thank you!

@timsawyer9231 Жыл бұрын

That really did turn out nice. Well done!

@rickcimino5483 Жыл бұрын

so cool. I'm so impressed with your videos and how far you've come over the years. Thank you for this great idea.

@Fixthisbuildthat Жыл бұрын

thanks!

@Grampiswoodshop Жыл бұрын

That is AWESOME Brad!!

@Fixthisbuildthat Жыл бұрын

thanks, Steve!

@terristroh3965 Жыл бұрын

Those are nice! I’m gonna add some to my office.

@phyternl Жыл бұрын

Really slick

@craigmunn9669 Жыл бұрын

You should check out the ShopSmith woodworking machine. The horizontal boring feature would have saved you a lot of headache! If you’ve never had a drill press with a 90 degree reference fence…it’ll change your life lol People are always skeptical about multi-function machines but I’ve always been very impressed with its reliability.

@andrealavigne7824 Жыл бұрын

Awesome shelf, Brad! I found your channel not too very long ago - thank KZfaq's algorithm for that, I guess - & subscribed almost right away. I love your content & especially your sense of humor. I'm building up my workshop (at a seemingly glacial pace) in our 2-car garage. Thankfully, my mom is letting me have the whole garage, though some of it is used for storage & to keep bags of yard waste dry between trips to the compost facility. Anyway, my latest project is a scrap lumber storage cart, which I'm within hollerin' distance of finishing. I've done a few things backwards, based on the video from the guy I saw make his. But I think it will still work. Next on the list are a drill-press table/stand & a patio table I promised for my mom. Thank you for the entertainment & instruction you provide. Have a great day! :)

@Fixthisbuildthat Жыл бұрын

Glad you're enjoying the content and good luck with the projects!

@MK_Est_75 7 ай бұрын

Love your content, keep it coming.

@MCsCreations Жыл бұрын

Really amazing work, Brad! Really well done! 😃 Stay safe there with your family! 🖖😊

@Fixthisbuildthat Жыл бұрын

thanks, MC!

@TotalBoat Жыл бұрын

Such a cool build!! It looks awesome!

@Fixthisbuildthat Жыл бұрын

thanks, guys!

@shadowwolf2044 Жыл бұрын

The way that you made this is actually very similar to the dyi cat wall ramp that my dad made for me. Just make sure that you keep in mind that dry wall tends to warp over time. We had to caulk it to hide the warping.

@davidhorizon8401 Жыл бұрын

You build just like I do. Wish I had the time to do this type of stuff now. I should retire soon and may get to do some then. For now, I will live vicariously through you!

@Fixthisbuildthat Жыл бұрын

I'll keep it going!

@timprince731 Жыл бұрын

FINALLY!!! was having some FTBT withdrawal.

@Fixthisbuildthat Жыл бұрын

I know...we have a lot of stuff in the hopper though! We'll be back on track for a while

@BiggMo Жыл бұрын

7:07 I think cutting a “v” groove for LED strips and mount them on the one side so the strips are aimed at the wall behind. I think this would provide eye relief and maximize illumination

@Fixthisbuildthat Жыл бұрын

Great suggestion, I thought about that, but wanted to maximize direct lighting vs bounce. And with the 3/8 recess it doesn't hit your eyes at all which is exactly what I was hoping for

@MASI_forging Жыл бұрын

That is an incredible video 👏👏

@Samhain2323 7 ай бұрын

Chester Bennington 😮 😢 Absolutely amazing floating shelves !!!

@justryanmedia Жыл бұрын

Nice project, and the honeycomb storage wall system will be a great addition to the room.

@user-mu6nl6sf5f Жыл бұрын

Awesome design! This is one more of your projects on my bucket list to make! Try and make, that is.....

@Fixthisbuildthat Жыл бұрын

thanks!

@freda2758 7 ай бұрын

Very nice.

@mindyhall4638 Жыл бұрын

Brad-love your channel. Any chance that you are willing to do an LED 101 video, from start to finish (calculating load, making connections, soldering, connecting to power, etc.)? You showed some of those steps which I appreciated here but for newbies, a more in-depth video on the LED world would be super!

@Fixthisbuildthat Жыл бұрын

that could be something I do down the road. Likely wouldn't be on the main channel though. Just doesn't have enough interest level for a full video unfortunately.

@mindyhall4638 Жыл бұрын

@@Fixthisbuildthat I understand; thanks for responding. If you do decide to do it on an alternative channel, would love to get pinged. Thanks again!

@kevinhilton8683 Жыл бұрын

Yea I'd be down for this as well, however I'm also betting I could figure it out too.

@vegaforce2539 6 ай бұрын

So many questions: - Are the LED channels in the wood enough for LED ventilation when they heat up? - why not use aluminum tracks instead of of 3D printed plastics (cheaper and better heat dissipation)? - why put the circuitry in-shelf? If you already fished a wire in-all why not just put them outside? Easier for maintenance and head dissipation. Impressive work. Thanks for sharing

@dondale68 9 ай бұрын

I do like your drilling jig!!

@jamiegibson1010 7 ай бұрын

Tip. The bigger the auger bit the slower the speed. That's why your drill overheated. I use a 12v Milwaukee drill on low speed, due to the screw bit on the end of the auger, with ease.

@topperdude2007 Жыл бұрын

Nicely done! I like how you have both task lighting and ambience lighting in the same shelf. Looks quite cool and you can control each separately. I did wonder while watching the previous floating shelves video about using batteries to power the LEDs and its great you have "upgraded" the LED setup in this shelf with hard wiring it. Do you think you might retrofit the lighting for the other shelves from battery to hardwired as well? Keep up the great work and looking forward to the next video to see how you might use that "lattice" 3D printed thingy. 😊👍

@Fixthisbuildthat Жыл бұрын

yes, I do intend to retrofit the old ones as well!

@kotap9929 Жыл бұрын

Great job! 👌🏻💪🏻

@Fixthisbuildthat Жыл бұрын

thanks!

@jonathangreen640 Жыл бұрын

Looks amazing 😁👌

@Fixthisbuildthat Жыл бұрын

Appreciate it!

@danlynch1154 Жыл бұрын

Brad as always wonderful and fun video. Thanks a million!

@Fixthisbuildthat Жыл бұрын

you're welcome!

@chadchisum1465 Жыл бұрын

Nice build I like the floating shelf with the LED lights

@Fixthisbuildthat Жыл бұрын

thank you!

@scotter_dotter Жыл бұрын

Most excellent

@jaromy03 Жыл бұрын

I'd recommend using aluminium strips to mount the LED strips on, as they tend to run hot which causes them to fail prematurely.

@saveriog.825 Жыл бұрын

Another good tip is connecting the power in the middle of a long strip whenever possible, or wire a loop to the other end. This way you half the current flowing in the strip main circuit (which is quite thin) and consequently the heat.

@williamellis8993 Жыл бұрын

That's great, Brad. I'm definitely qualified for the drill group. I was even wondering if the coupling on your extension would fit into the hole. Apparently it did. All this and no "me" nails (lol). Bill

@Fixthisbuildthat Жыл бұрын

I haven't shot a good "me" nail in a while, need to fix that!

@user-cr9tf4ni9y Жыл бұрын

You are amazing!

@stephenrobinson8250 Жыл бұрын

Would love to join your band. I can make my table saw squeal cutting super hard red Oak!!! Can I use the LEDs to light up my stairs to the basement? Have you ever tried something like that? Great vid. Keep them coming!

@Fixthisbuildthat Жыл бұрын

You could definitely use them for area lighting. Just about getting the right amount and a "fixture" to hold them

@aaronqueck4910 Жыл бұрын

Love the way you did your supports for the shelf. How deep is your shelf? How far did you drill into the studs for your steel rod to go in? Is it sturdy? Seems like a great solution to buying ridiculously expensive brackets and you don't have to mortise out the back to conceal the plate. Great solution for shelves that are solid wood and only 1.5" thick.

@ammmze Жыл бұрын

Im excited for the honeycomb wall. Ive seen tons of things on printables for it, but always wondered how well they turn out in practice.

@Fixthisbuildthat Жыл бұрын

It's looking gooooooood

@jeffforbes3772 Жыл бұрын

An official Brad Rodriguez FTBT Video?? Heck yes!

@Fixthisbuildthat Жыл бұрын

too long of a break, but we have a lot in the hopper right now!

@robertboughton11 Жыл бұрын

Nice Job.

@Fixthisbuildthat Жыл бұрын

thanks!

@wilmercb 7 ай бұрын

Great videos. Need advice, would I invest in a 10" or 12" Mitter Saw? Thanks

@perpetualgrimace Жыл бұрын

LEDs nuts bro

@ObsessiveAboutCats Жыл бұрын

This is AWESOME. I like this so so so much better than the floating shelves I built a few years ago. Now I want to scrap those and install some like these. Hard maple would look great on that wall, too. HMMM. I love your videos and creativity, even if my to-do list does expand with every video you post.

@Fixthisbuildthat Жыл бұрын

Thanks!

@danmcmartin Жыл бұрын

Makes me want a drill press...

@sabersaw5611 Жыл бұрын

Used to have that guide. Too much slop and the spring was annoying. Go with the rockler.

@ASolangeM Жыл бұрын

I fit the bill of “Idiot with a Drill” and I’m in Murfreesboro so close enough for an in person audition!

@Fixthisbuildthat Жыл бұрын

no need for any audition, anyone from the Boro is good by me. application accepted

@SnakeAndTurtleQigong Жыл бұрын

Fun!

@BentusiProgenitors Жыл бұрын

That's a lot of work, but it turned out great. I may have to do this myself.

@Fixthisbuildthat Жыл бұрын

the work was worth it!

@locosmuevenmundo 7 ай бұрын

great video, you could try to add an esp32 to have wled aded to your setup

@naturalpowerzone 5 ай бұрын

Awesome Job, it looks amazing.. Is there a tool you don't have.. LOL 😀

@xJayKnight Жыл бұрын

Brad, what was that set of helping hands you used to solder with at 13:45? I do a lot of guitar wiring and it looks like that would work great for pre-wiring stuff.

@Fixthisbuildthat Жыл бұрын

I saw it on someone's Twitter I believe. It's a small guy from Sweden who designed them. omnifixo.com/

@xJayKnight Жыл бұрын

@@Fixthisbuildthat Awesome! Thanks for the link.