Fizz Giz Refillable CO2 Bulb

Рет қаралды 2,426,226

12 жыл бұрын

Like rolling your own fizzy libations? Watch these: • The Soda Stick AND • Soda Rope
Eggs from an aerosol can? Watch these: • Two Carbonated Egg Whi... AND • Egg Fluffer Demo 4
FiZZ GiZ home beverage carbonation kits are priced at $34.95 on their website below. The CO₂ dispenser is virtually indestructible. Full patent disclosure may be viewed at the following links:
www.google.com/patents/USD708708
www.google.com/patents/US9173430
Website: www.fizzgiz.com
eMail: MrFizz@FizzGiz.com
Phone: (409) FIZZ-GIZ
This 16-gram refillable CO₂ bulb design was conceived by a FiZZ GiZ customer whose ingenuity is surpassed only by his creativity and his good nature. His contribution to the open source community makes it possible for all FiZZ GiZ kit owners to access and use cheap, affordable CO₂ anytime anywhere. It only takes about a nickel's worth of CO₂ to refill your empty bulb. This makes your savings roughly a buck-or-two-a-pop. Enjoy.

Пікірлер: 602

@phantomcreamer 6 жыл бұрын

I have no interest in building one of these, but something about your tools, knowledge, and process was hypnotic.

@cadecarp11 5 жыл бұрын

Watch This Old Tony

@tonyb5469 6 жыл бұрын

Wow, way beyond my ability to make them, but I would buy them in a heart beat. Awesome, you def need to sell these.

@russbilzing5348 4 жыл бұрын

In the '70s, I had a Daisy 44 pellet pistol. I built a refillable 12 gram cartridge for it with a schraeder valve stripped from a bicycle tube. I placed the valve towards the bottom of the cartridge so that it would protrude through the grip in the empty space behind the tip of my little finger. This way, I didn't have to remove it from the pistol to refill it. I learned to wait for it to come to room temperature before resuming my target practice, since it would misbehave , giving poor accuracy and speed, otherwise. As a machinist, this is an elegant solution. Thanx.

@MisterFizz 2 жыл бұрын

Thx, Russ. Check this one out... kzfaq.info/get/bejne/iJuCgsWE16rQiJc.html, my latest pressure regulator.

@petemaly8950 4 ай бұрын

@@MisterFizz Very interesting seeing this done. I couldn't use it as it is. The valve would need to screw into the cartridge with an acceptable compressed gas usage thread. Glue is not ok.

@TECHOPC 4 жыл бұрын

archie ball = " i can make a refillable CO2 cartridge." airsoft dudes= "mine mine mine mine mine mine."

@jacksonlee3771 8 ай бұрын

I seen a KZfaq post today. They fill the cartridge with black powder and fuse. Pretty powerful detonation.

@agoogleaccount2861 5 жыл бұрын

I could see these being useful in hard to get mini co2 bulbs used in seltzer bottles

@mgrdigimarketing3035 4 жыл бұрын

Good tutorial thanks. Pleasure to listen to. Original idea is brilliant.

@RonFloyd 8 жыл бұрын

Well done. Just one suggestion: Use a 3/16" end cutting end mill for the first pass - slowly, and with the tailstock quill as short as possible. This should make a clean starter hole with no runout. :-)

@NFLcornerback 7 жыл бұрын

I'm going to make 10 of these tonight... I have all the tools just laying around

@jaydee06 Ай бұрын

Beautiful craftsmanship

@andreacabito8398 12 жыл бұрын

Where do I get the attachment you have, that enables you to fill the 16-gram bulb from the larger CO2 bottle?

@friendlynaborhoodspiderman5241 7 жыл бұрын

how can I make a cap for the co2 cartage that when screwed on, I can pressurize it and when off I can put what ever in it like water.

@BlaineSrFredrick 3 жыл бұрын

Freaking genius.. I love his narration.. 💯

@darringoodbrand6603 7 жыл бұрын

can you fill with ups so less chance of freezing up

@philboeroe 7 жыл бұрын

Where do I get the valve? Or do I have to machine it myself? And does this also work with 12g Co2 cartidges for airsoft guns?

@Vireakyuth13 11 жыл бұрын

after the first refile why do u put the tank to freezer ?

@disc64 12 жыл бұрын

very slick. I don't expect to do this myself, so I'll wait for somebody to go into biz selling these. I'll pay a pretty penny and won't mind. P.S. very smooth camera technique

@giovannialinv7252 11 жыл бұрын

I'm sorry can you tell me all the components of the valve and the size? thanks

@thomasmclean5708 8 жыл бұрын

this is amazing, well done to you sir.

@robertstine136 8 жыл бұрын

Thanks.

@raduchristian7547 8 жыл бұрын

Where could i find a valve like that?

@Woodrough77 12 жыл бұрын

Where do you get a CO2 bottle the size of the one you used to refill the cartridge?

@DrGreenThumb135 5 жыл бұрын

Mike Spike, any chance you could try this with a 12g co2 cartridge that we use with air pistols? Can it use the same valve parts??? I wish I was good enough to do this!

@lionlocVanDwellington 7 жыл бұрын

Could this idea be used with pellet gun co2?

@MisterFizz 11 жыл бұрын

There are 2 pressure vessels: A source vessel and a target vessel (aka 'mother tank' and 'nursing tank'). If the pressure is the same in each, liquid will not flow from one to the other. Chilling the target vessel lowers the pressure inside. Liquid flows from high pressure space to lower pressure space.

@brunonogueira9353 11 жыл бұрын

where i find this valve?

@pacman10182 5 жыл бұрын

could you use a schrader valve?

@cpdtrevisa3098 6 жыл бұрын

Hello, how do you make the valve cilinder?

@danyvolvoful 4 жыл бұрын

So much hard work for few cents,onbeliveable. In Ñl x8 for 5 euros.. I buy 50 for 35 e and i have all year to shoot.time is gold.

@sehyro 5 жыл бұрын

Could you consider KWA ERG MAGAZINE for bolt stop? I have a WA daytona hpa, people who use Tippmann envy the boltstop mechanism.

@thomasbroking7943 5 жыл бұрын

Looks great...can you also pump it up and use air??

@LupoAlberto19 11 жыл бұрын

what's your name and where you buy that gun to blow co2 canisters? tanks

@Astrovibrain_laboratory 7 жыл бұрын

Hey friend, you did a great job.Could you tell me, what is the name of that cylindrical part used for NRV making or from which machine you removed it from...?

@albinowhite3946 4 жыл бұрын

does this work in co2 airsoft guns?

@unclejohn1053 2 жыл бұрын

Lol.. nice casting. Loved the Happy Gillmore!

@MisterFizz 11 жыл бұрын

Look for the contact info in the "DESCRIPTION" above, published on Aug 21, 2012. Hope that helps. Contact MrFizz.

@footgod420 8 ай бұрын

That's incredible

@al5ayyal911 5 жыл бұрын

I dont what you are doing or why but I enjoyed it very much.

@Bubca 5 жыл бұрын

Where did he get the valve??

@simonsas1492 10 жыл бұрын

Great vidio, tell me were did you get the loader? *o*

@ss-rg5ts 5 жыл бұрын

Good idea, if you have a lathe, although using a threaded valve would be safer

@philss1 3 жыл бұрын

Should you have included cleaning the capsules out before assembling?

@Blakehx 6 жыл бұрын

Where can I get these valves? Thanks

@ahmadhaziq3802 7 ай бұрын

do you know the material used for the original seal?

@railnut8453 3 жыл бұрын

Can the same process be used to make refillable cartridges for CO2 pellet guns too??

@raulantonioalonzo1911 8 жыл бұрын

y en donde lo venden

@Detectorismoeaventura6648 7 жыл бұрын

Hello friend how many pounds of price did you put in the co2 cylinder?

@tomkian 9 жыл бұрын

Beautifully done!!!!! Thank you very much sir for sharing.... salute!

@MisterFizz 9 жыл бұрын

tomkian Thanks for the kind remarks.

@timbow1833 Жыл бұрын

impressive

@false-set 4 жыл бұрын

This is brilliant

@rictorres6979 3 жыл бұрын

Is that co2 food grad?

@fxxkmylife5170 Жыл бұрын

that is a nice co2 cartridge!could you tell me what name is that refill tool?

@MisterFizz 12 жыл бұрын

Can't say for sure. I didn't procure that one.

@default.1. 7 жыл бұрын

do you have them for sale?

@mirowwiskdeoliveira6684 11 жыл бұрын

show de bola funciona em cilindro de 12g tambem, e quanto custa tem como me enviar uma pago preciso de 5 cilindro

@davestambaugh7282 6 жыл бұрын

I got a bunch of these aluminum tanks for the brown motors that I have worn out. The motors wear out but the tanks last forever. I can not think of any reason that I would rather use one of these steel ones instead of aluminum which is far lighter.

@user-ws1ju2bb8j 4 жыл бұрын

Need space for liquid expansion?

@nicknoyb8067 4 жыл бұрын

A few things could have been done easier but brilliant idea and tough enough for me not to cringe when filling. Thanx for the share

@merecatbear114 8 жыл бұрын

they need to mass produce these things like yesterday

@robertstine136 8 жыл бұрын

I wanted. In spite of there being lots of interested in the video and the concept, there were insufficient takers when it came to offering to purchase.

@TheArachnid 7 жыл бұрын

Doug Thomassen but then CO² sellers would lose $$$

@everythingpony 7 жыл бұрын

WCIS !!! duck them?

@thra5herxb12s 5 жыл бұрын

They already do, look on ebay you can buy anything you can imagine.

@Gpgesell1 5 жыл бұрын

Awsome

@S_GuiYo 8 жыл бұрын

Where is saling compressed co2 gas? I want know that.

@boardfu 6 жыл бұрын

BRILLIANT

@murrayc489 3 жыл бұрын

Will this work with air guns

@jamiesuvo7420 3 жыл бұрын

Well done

@MisterFizz 11 жыл бұрын

Contact info is in the "DESCRIPTION" above, published on Aug 21, 2012. Hope that helps. Contact MrFizz.

@MisterFizz 11 жыл бұрын

Certainly. I suppose there are some paintballers left who use the smaller CO² bulbs. Mister Fizz

@limehuzki 3 жыл бұрын

If you produced these for CO2 powered airsoft gun you would be raking in the dough

@erikdillon5844 3 жыл бұрын

Where would I be able to find the valve that you used???? This will save me so much money a month

@notsure9079 4 жыл бұрын

WOW 8-10 HOURS WAS A LONG TIME TO HOLD THAT UPSIDE DOWN UNTIL DRIED!

@alencore 8 жыл бұрын

cool mod! i have a refillable with a valve intake on the side dont know if it was custom made.

@russbilzing5348 4 жыл бұрын

Please check out my comment. I had modded a Daisy Model 44 (S&W M-29), adding Bondo to the grips etc. as I used it for a target pistol, until only the tip of my finger could move. I'm looking for the pistol, because I left it with my son and when he died, his mother threw out all the things I had asked him to keep until I got back. It was some years ago, but I still hope to find it.

@oceanhouse8080 5 жыл бұрын

Perhaps silver soldering the valve body in would be safer...perhaps a threaded Schrader valve body.

@DrGreenThumb135 5 жыл бұрын

That was great to watch! Nice work! Can it also be used in a BB-pistol??? I hate throwing them away...

@MisterFizz 5 жыл бұрын

Pretty much any bulb can be converted. Some have converted the small 8g bulbs as well as 12g bulbs.

@MrSwanley 12 жыл бұрын

Very interesting! Please clarify one thing: you mention that the valve was made from stainless. Does that mean the valve was made by you, or can it be bought somewhere?

@pabloripoll4122 6 жыл бұрын

Podrías enseñar como haces las válvulas o donde conseguirlas Me gustaría saberlo Muchas gracias

@FinnisJaeger 6 жыл бұрын

Oh yes gonna do that because i have complete factory in my small apartment.

@friartuck103 4 жыл бұрын

You should have run some low grit sand paper on the outside of the valve, and the inside of the container mouth so the locktite has something to lock into...

@roger7799 6 жыл бұрын

What kind of glue is that? Somebody knows?

@The_Seal77 4 жыл бұрын

are the parts for this up scaled to be able to do this to a 90g co2 cartridge?

@MisterFizz 4 жыл бұрын

I don't make these anymore. I never sold parts in kit form. If you do make one, here is a use for CO₂ that I bet you've not tried before... kzfaq.info/get/bejne/pK5mlJWHsZPNe2Q.html

@rick31869 7 жыл бұрын

i wonder if it would be worth making this for the co2 cartridge for pellet and bb pistols and rifles ???

@rick31869 6 жыл бұрын

will a 16 gram co2 fit in a 12 slot ? for airpistol?

@0XAN 10 жыл бұрын

awesome work! you're the best!

@MisterFizz 9 жыл бұрын

0XAN Thanks.

@kennethconnors5316 3 жыл бұрын

very cool

@polzovatel9490 4 жыл бұрын

brother is a very good idea

@tomtomlin3408 4 жыл бұрын

Great how to. One note 6-32 means number 6 size screw and the 32 means 32 threads per inch.

@MisterFizz 4 жыл бұрын

Yes. Many times since the original making and posting of this video, I've regretted that slop-of-the-tongue. Thanks for watching. If you have more than a passing interest in CO₂, you may be curious to know of this alternative use of compressed carbon dioxide gas: kzfaq.info/get/bejne/pK5mlJWHsZPNe2Q.html

@belgrave1984 8 жыл бұрын

where do u buy those value

@robertstine136 8 жыл бұрын

Sorry. I do not build and sell the cartridge loaders or the refillable CO₂ bulb. The reason is simple economics. In spite of there being substantial interest in the concept, too few people in buying the product. I was hoping a distributor/retailer might order 500-1000 pieces for resale. Hasn't happened yet.

@debmalyadas2585 4 жыл бұрын

How can we buy this curettages?

@HarmonicGrunt 9 жыл бұрын

Positive Pressure Cylinder Cool.

@omsingharjit 3 жыл бұрын

Can i use it for Making carbonised Drink ?

@MisterFizz 3 жыл бұрын

Sure.

@MisterFizz 10 жыл бұрын

Kurt, sorry, no. As of this date I do not have tooling in-place for this. When I do, I'll let you know.

@krig2052 4 жыл бұрын

I have come into possession of a vintage butane lighter that requires co2 style cartridges that no one seems to sell these days. I wonder if this would be a viable solution

@MisterFizz 4 жыл бұрын

Let's C, shall we? Take 2 snapshots (side view and orthogonal w/ business end nearest camera lens). Take measurements (body OD, neck OD, overall length). Send me the pic's & the dim's. Will C what I can find out 4U and will let U-know what I think with regard to its viability U R wondering about. MrFizz@FizzGiz.com

@alexstrings 2 жыл бұрын

The cartrige can explote after several use and damage the gun. or a hand.

@norman1826 6 жыл бұрын

awesome..

@alixsprallix Жыл бұрын

great video

@MisterFizz 10 жыл бұрын

Simon: The loader is home-made too.

@Adamisgood24 6 жыл бұрын

Great, could you do the same thing for a nitrous oxide cartridge?

@MisterFizz 6 жыл бұрын

Should be possible.

@cheesehead4738 4 жыл бұрын

How can I buy a fizz giz?

@faustopanzer9897 8 жыл бұрын

thank you,it's very well done

@robertstine136 8 жыл бұрын

Thanks for your kind remarks.

@samuelespadafernandez2272 6 жыл бұрын

Awesome 👍

@johansvenson9154 4 жыл бұрын

what is that pressure air thing ? please where can i buy it

@MisterFizz 4 жыл бұрын

I'm unsure.

@alexandernahodil 8 жыл бұрын

I ask where you bought the gas membrane? Thank you

@robertstine136 8 жыл бұрын

Not sure I understand what you mean by 'gas membrane'. Could you explain further?

@WarHackz123 2 жыл бұрын

That is cool

@jayh131 2 жыл бұрын

How much spray do you get if you pierce it in one go how long would it last a few seconds?

@MisterFizz 2 жыл бұрын

A 16g bulb can be punched with an ice pick. The tip will form a suitable seal and prevent the gas from escaping if you keep the tip pressed firmly in place. Pull it out and U will C that gas will escape in an extremely short period of time, cooling the contents rapidly. All this will happen in under one second. A portion of the liquid co2 will freeze, solidifying into dry ice which then sublilme away directly into a gas state. The initial blast of gas is short lived. The slower release of gas during sublimation will occur more quickly if you warm it a bit in your hands along the way. The "spray" is not at all remarkable. But wasting one co2 bulb this way to satisfy your curiosity is worth the relatively low cost of finding out for yourself.

@savedemperor8024 8 жыл бұрын

hi where i can buy that co2 cartridge loader?

@robertstine136 8 жыл бұрын

Sorry. I do not build and sell the cartridge loaders or the refillable CO₂ bulb. It's simple. In spite of there being substantial interest in the concept, too few people in buying the product.