Now you gotta put bed liner on that interior trim piece

Looks great! I dig it! I'm kinda curious if you went back and painted the inside of the gas cap... You could see the blue from the outside in the shot you showed. :P

for future prep of flares and plastic bumpers, check with you local auto body supply. We use a red scotch brite pad. they also make a grey pad that can be used. Red is about the same as 180/220 sand paper and grey is approx. the same as 400 sand paper. The scotch-brite pads work better and allow for detail prep. Hope this helps.

Raptor lining my old Jeep was such a satisfying experience. Replacing lights and mirrors in conjunction made it look like a brand new vehicle.

It looks like you missed the inside of the fuelcap (@13:31 for example)

Painting squad

.....I used a whole kit on my front bumper alone.... This is such an insanely thin coverage if it ever actually see brush or off-road environment, that stuff will scratch right off... The problem with the texture build up is cause you are holding the gun 6"-12" from the surface and blowing it flat. You hold 2'-3' away and do sweeping coverage, like one liter over a whole side, and then flash off while you do the hood/hatch or other side or roof, then come back to it again you build texture very quickly... Nice grainy texture... Blowing it flat first like you did is nice though for a base coat and absolute coverage with no visible blue between texture granules. Still looks great but I did 3 tintable kits to my 4Runner and an entire black kit to build thick protection to my front bumper... Handles branches and rocks like a champ.

You could use a white board. Like 1 for every project. That's great lighting in your garage no dark shadows pretty good detail. I really like how you juggle all of these projects and come back to it later like the FJ and leave a whole array of stories to go back to especially if your new to this channel. Great job! Worked out just Puuuur-fect!

Hurray! Loving the episode Chris!

Always primer your filler work and then paint it

I didn't expect the FJ to look that badass with that paint! I'm excited to see the final build!

painted my Jeep TJ 2 summers back in a friends garage. It was quite the learning process but it turned out really solid. I will be raptor lining it this summer to make it look a lot better, and this vid has reminded me of how much fun it was, regardless of how detail intensive it is

I was a doubter. I've seen a truck done with bedliner before and it looked like total crap with uneven coverage and stripes and stuff but I'll admit it, I was wrong, your's looks really great. Makes me think if Toyota would have made them with some cool paint jobs instead of all the weird or bright colors they might still be making them today.

People saying it looked better before... Hell no this shit looks beast

Just finished painting my Wrangler with blue raptor liner. Your video helped a lot with it!

Ive had 3 bottles of Raptor liner for several years now..lol Was going to do my entire bottom half of my Blazer with it.. Changed my mind.

Paint back over the liner with blue! I did it on my jeep and it looks awesome!

Hella cool of you to give the brz to that kid.... right thing to do fore sure...#karmagoals

I have been wanting an FJ for many years now. This looks Awesome!

Was not expecting the FJ to look this good. Well done Chris. I like your scheduling too, dont wory about the haters in the comments. Dont mind you mixing it up.

this fj is sick asf

I have 4 pieces of homework to do, 1 project, 2 assignments and I need to go over my notes but that can wait since B is for Build uploaded.

Top notch!!! I am painting my Japanese mini truck with this method. Thanks for sharing

I maintain bed liner is good for a lot of things making faded plastic look better ripping out old gross carpet and bed lining the floor board. But have got to paint the metal on your car or truck. A good paint job will last longer because I’ve seen a lot of faded bed lined vehicles.

Am I the first to say B is Bedliner?

am i the only one that is botherd by the gas lid

I really like the way this FJ looks. That's how I would want it to look!

My buddy painted his Civic with Raptor black and it looks great. He's painted a few cars and trucks with Raptor and they always look good.

The true test of this paint will be when a student backs into your car again :D

Wow that looks good

Mythbusters did a show about tub liner and found that the one they used was bulletproof and survived some explosives lol

pre paint the cracks and hard to reach areas then let it dry then put it on dry!!! for more texture air pressure is speed times distance so its all a combo of the three don't buy cheap tape and don't mask with plastic dry paint will come flying off it and get on the finish any one can do this its like spraying drywall texture ..in fact we used a hopper when it first came out extra heavy duty..hope this helps.. and the bondo needs the metal to stick it wont feather over some types of paints i would drill holes for it to grab on and one application not layered filler unless its a lighter weight . and 50 other things ,but you figure that ..out THANKS FOR THE VID ...88 Jeep Cherokee 4.0 Auto 3.5 on 33's

All I want to know is when the Camaro is going to get some love.

B is for every car is flat black

I have to say, for some reason one of my favorites segments are the bodywork/ paint. Keep it up bro!

Love it. Gonna spray my k5 in two weeks. Grey on the outside and either orange or brown on the inside.

For such an easy mod. Such an awesome result.

I’ve been thinking about doing this to my car. Just for the hell of it

You made it look much easier and quicker than when i did it. Took two days of prep work, few hours of masking and about 2 hours of spray. But damn did my suburban come out good. We even got similar fender flares.

Thanks, brother. I've got a 69 Nissan Patrol and my 94 LC FJ80 I've been working up the nerve to do this to. Appreciate your video.

So did Chris ever find the thieves that stole his wheels?

This is the first video of yours I watched, you build cool things, you have skills, subscribed, I hope to learn from your other videos. Thank you.

The FJ is looking better and better!

Bro, I love your builds. all my cars are crappy, and i need motivation. and then there's B for Build. So that way i get motivated.

Did you ever spray the inside of the gas cap? I could see blue on the inside from the outside still, then ya just left me hanging

I've been subscribed from the very first video of the first blue BRZ. KZfaq keeps unsubing me!!! WTF KZfaq??!!

Favorite B is for Build video to date.. it looks fantastic and this is now a must do for me

Nice job. I did my 97 GMC Sonoma High Rider in gray and black bed liner. I love it.

B is for blacked out everything

B is for buy a new stool

I spray raptor liner a lot and love it.. I usually do one heavy coat then back up a few more inches and do another medium coat.. They key to durability with bedliner is the mil thickness.. Just a lil food for thought..other than that good work man

That looks so much better than I anticipated it would. Very impressed.

Did you fix around the fuel filler neck? Awesome look for the FJ. I look forward to your future videos!

How much rapor did u use on the car?

Your FJ looks AWESOME! Can't wait for the next episode.

i'm sure by now you run into many folks asking about your paint job and that its freaken AWESOME !!!!

Awesome! Anyway you can give us/me a list of products you used on the fj?

Today is my birthday, I was born at 6:37 pm so that means at my actual time of birth I will be watching B is for build

wow just wow love the raptor bed liner

It's Nice to see another fj with a bedliner as a paint! All I'm going to say is that if someone keys your truck it won't even matter haha!

you should lowkey spray the Aston like this! it would kinda be dope, and you definitely have enough left to do it lol

Nice paint job, looks tough. Did you fix the gas/cap cover area?

I have the same blue FJ and this is my dream version of my car! Awesome.

Tinting the Taillights and the front indicators will give a more aggressive look. And follow the black on back theme better

Raptor liner 😝 that's what I meant to Google, put in rhino. Thanks.

Tint the tail lights and turn signals

Now we got all trucks bed liner yeahhhhhh!!!!

Very nice look. I did the same on an old ambulance in FDE. I live in a dusty desert area. A year and a half without a bath and you couldn't tell.

Not being a hater... you should have put multiple coats of the liner on.

Honestly wpuld love to see more of the aston martin tbh haha.

It's a pleasure detailing this car :))

hell yeah it looks better than I had imagined

I do have to say you a very frigin clever at what you do. You inspire me and I'm sure you inspire many others

It looks aggressive and awsome!

Nice work - I customised my X5 and finished it with raptor (youtube X5 offroad beast - it's a little slide show), gets more attention at car shows than anything else there - will be doing more projects in the future.

Listen to been there done that for years sand, rust converter, etching metal primer, bondo, sand, high rise primer, sand, glazing compound, sand, primer, urethane base coat, urethane clear coat. Bingo beautiful. ;)

Closer will tighten texture lower air preasure Move fast strokes not to run. Higher pressure further away will give you gravel super grainy I have always wanted to do this but never had the balls like to see somebody else do it learn from their mistakes not that there’s any I am Auto Painter 30+ years Love this stuff can be rolled on as well I did the bottom 3/4 of an aluminum bass boat worked great talk about sound deadener.

That actually looks good on that FJ. That wouldn't work with most other cars. One awesome thing is that you'll never have to worry about scratching your paint again.

It looks excellent

I used the same Raptor Liner kit and had great results. It was an easy process. My only wish would be that Raptor Liner separated the hardener into individual 250mL bottles to avoid measuring and make the process more seamless.

That thing is going to be hot as hell in summer

Also spray the inside of the gas cap, and the door sils and stuff, maybe inside the rockguards, you have so much leftover and I think it would finish up the car completely, looks insanely cool Chris! Don't understand I have never seen this before on any other car, its mental :D

That looks beast

I'm gonna do my 2dr. Gmc yukon like that. Looks nice!

that looks 2 million times better then i thought it would good job i might just do that to my truck

Very nice. Keep up the good work.

Air pressure changes the droplet size with raptor, higher pressure finer pattern. Nice, only thing I would have done differently is spray it before the fender flares then coat them when you put them on. And maybe under the guards!

Use one of the leftover bottles to spray the inside of the door frames, hood, gas cap flap, wheel wells, etc, etc

That came out great. It looks good enough, that I want to do it to my car...but it's brand new, so I'll wait a few years.

You should paint some of the interior trim peices with the raptorliner to match

Love the look of the FJ

I never thought the fj cruiser could look good

turned out great.

Finally a good episode, really enjoyed this one.

you need to setup the air compressor to less 75 for small texture

I love that paint. You good

Wow! It looks incredible!

NICER LOOK.NICE JOB

Looks great!

Rig looks nice. Try Monstaliner next time. Its roll on. UV protective. Lots of colors. And very durable for off road rigs.