Yes you do need the full version to do it. Explain to seller is my advice.

Ring the guy who repaired it for you. I'm not sure to be honest. Long time since I looked.

The car can't find the box that's why it's flashing as box is bust. It doesn't recognise that bit of hardware anymore as can't connect to it properly. If you disconnected blue n me box it would still flash until you did a proxi alignment as it would still think something should be there. Is my understanding anyway. One guy though said his just started working again a year later. A new battery might you never know make it work again one day randomly. But have only heard one person say that it started working again like that. He thought it was because it lacked enough power to say good night one time it switched it's self off and then box got stuck there. I think if you leave fuse in. It eats your battery there is a you tube video about it online. So may be best just taking that out. As it would continue to drain battery. But you can decide that yourself.

@@cranswil Yes, I’ve disconnected the B&M module a few months ago because it was draining the battery. If I don’t replace it and just do an proxy allignment whilst it is disconnected will it stop blinking you recon?

@@rickhonings2894 the proxi alignment finds or deletes what is and isn't connected. So It would get rid of old box from its memory then it wouldn't think it had something connected it didn't recognise I would think (don't know 100percent though.) But if you ring up that guy in my next video he'd do it for you. He was helpful When I changed mine it forgot the old one. And then learned about the new box.

Try the listed guy in description

@@cranswil ah! I did have a look at that but didn’t realise it was the software too, thought it was just the cables. Got to find a computer with a disk drive now. Thanks for your help!

we do get cable for 2015 Chrysler 200 and well this work on it

From another vehicle. A good quality parts place will sell you a working one. Good luck. 5051 or 5052 different generations 1st gen or 2nd gen. Was what I went on anyway

The one I bought came with the software that you needed to install and wires. The guy was very helpful I bought it from. I sent him a message when I couldn't make it connect at start with software. See description for this you tube video

@cranswil i just got a quotation from alfa dealer in Ireland... It looks to be the blue & me unit that is the issue. You would need to replace the unit and the cost is €759.59 +VAT (labour cost included). There is 1 unit available in Dublin at present. 🫨😟

Find the box yourself with same 4 starting 4digits to one you have and follow little mechanics videos on removing glove box and my video and you will get a replacement for about 140quid.

@cranswil so I must replace the mechanical part, I thought it was only a matter of software update... ok I will follow the video and see what I can video... where can I get the box?

@cranswil hi, sorry I bother you again... ok, I understand now. Before the proxy alignment, there is to be replied the physical unit of the Bluetooth, apparently... when you say, find the 4 digit to the one you have, what do you mean exactly, and where do I find the digit? Thank you in advance

Are usual features working when you put new box in that were broken before? Like being able to make calls etc like it was before. Do you have registered version of multi- escan? Not sure on exact fiat numbers for your car. But likely first four numbers need to be same ie. 5051 is the 1st generation one I think and 5052 is 2nd generation one. For Alfa Guilietta I thought.

@@cranswil Yes, new box features working (bluetooh calls / usb reads) but when i make proxy aligment it does not match to may car and odometer flashig always :)) I wrote the numbers on the box label Tomorrow i check IE numbers and I'll let you know Thank you!

@@sinanadali if it doesn't match to your car are you sure you've picked the correct version of your car on the options when connecting? Maybe check that. The other thing on Guilietta some software had sat Nov version not sure if that affects what box you need or just the software to download. Bar that not sure what to suggest as it box works for your car as you are making calls etc. If you get stuck guess just put a piece of black tape on it to stop seeing it.

Also are you sure you didn't buy the cheap cables and scannee to save pennies that aren't right. Rather than through a reputable place. Other people found that issue. Check out Tony Vialetto's how to connect by OBD2 video

@@cranswil yes i am sure i am choosing the right version. i think it doesn't match because they are not the same (PN) numbers. But system is working.. I'll be mad :D

On some of the other videos it mentions fuse 36 and still pulling 0.25a even though broken. Can't advise if removing fuse would save the waste? Not completely sure

@@cranswil thabk you for your suggestion, much appreciated. .. anything is worth a try 👍

Hi I have similar problem in my AR mito, did you fixed it ? Thanks

@@okrutnik5080 I removed it and sent away to e fixed

You have probably bought the inferior bluetooth adaptor about a tenner that plugs into back of blue n me box. Tony Vialetto had issues with this too and lost his call making ability but got the music playing. kzfaq.info/get/bejne/nOCemt133r7KfXk.html From reading that thread there is another adaptor that is about 35quid that is much better (think it could be this one. But not 100percent sure so haven't bought. (www.amazon.co.uk/Bluetooth-music-hands-free-suitable-Romeo/dp/B07JNT7CC6/ref=mp_s_a_1_3?crid=2VA476E07OL7R&keywords=blue+music+alfa&qid=1641631519&sprefix=bluemusic+alfa%2Caps%2C246&sr=8-3) But read thread on Tony's comments check with someone there. I don't use Spotify so haven't bought it myself. which keeps Bluetooth music working and calls working too. Hope that helps.

@@cranswil . Thanks very much for this information. I will check he’s KZfaq channel much appreciated.

You need to buy the cables. The usb port goes into laptop off the ELM327

@@cranswil will the Bluetooth one do it

@@craigbotham7462 sorry don't know what you mean. Cables you need are listed in details on video and where I bought.