I would want one. A fidget board that shows compliant mechanisms sounds like the ultimate nerd gift.
@wilsoncalhoun4 жыл бұрын
1:36 Whhaaat? Are you implying that your cat would knowingly lie about having been fed in order to get more food than it really needs? Scandalous.
@AmyMakesStuff4 жыл бұрын
🤣
@wolfgangreichl33614 жыл бұрын
I'm pretty sure the cat merely truthfully states that she's just moments away from dying of starvation - ... without being too specific about the exact number of moments.
@nopesquid15364 жыл бұрын
she really be flexing on us
@DeXoDeD4 жыл бұрын
Hahaha,
@MlSTERSLOTH4 жыл бұрын
Stop, no but keep going.
@OttomanDrifter913 жыл бұрын
When you make stuff you should flex too, it's the law B)
@oxtoolco3 жыл бұрын
Excellent video! Cheers, Tom
@AmyMakesStuff3 жыл бұрын
Thanks, Tom!!!
@davidsiriani95864 жыл бұрын
The Festo inspired mechanism at around the three minute mark is just awesome. Also thank you for the 3D files; I can't wait to make one of these.
@zirgaoec37844 жыл бұрын
Goddamn genius. Nothing else to say really, your channel deserves to get more recognition
@XYZAidan4 жыл бұрын
Amazing work on this, especially the gripper!! Really blown away by the detail you put into all of these mechanisms
@LimitedWard4 жыл бұрын
Okay I've only seen one video so far, and I can tell your channel is gonna pop off.
@JacksonTravel4 жыл бұрын
tru
@eliomunafo16722 жыл бұрын
I really liked how it has been presented
@AmyMakesStuff2 жыл бұрын
Thank you!
@dleesnuts3 жыл бұрын
Someone hire this person and give them lots of money!
@karthick86c3 жыл бұрын
As someone who adores flexures, I am very impressed by the amount of work you have put into making this video. Good job!
@jaimemitchell39283 жыл бұрын
Amy, I used your Honda Element shelf design and it made my home really comfy and functional. My instructor just recommended this video for our laser cutting class. Thanks for all these great videos and designs! :)
@AmyMakesStuff3 жыл бұрын
It’s really wonderful to hear stuff like this, thanks for sharing :)
@saiello20613 жыл бұрын
I believe these are called "compliant" mechanisms. I only just discovered them as a "thing", opens up a whole world of creative possibilities...! 👍 Love those mechanisms, gives you a unique feeling of saisfaction playing with them... 😁
@DannoHung3 жыл бұрын
Are all flexible mechanism compliant? It seems at least a few differ significantly from the the previous examples I've seen demonstrated.
@saiello20613 жыл бұрын
@@DannoHung There must be a strict definition that I'm not aware of but I think any mechanism whose function relies on the bending properties of a material for its working as opposed to traditional linkages could be characterised as 'compliant'.
@dan339dan2 жыл бұрын
I believe compliant mechanisms can't have friction come into play. So unless the mechanism is only powered by tensile forces, it's not compliant. At least that's what I get from compliant mechanism videos
@dl0.0lb3 жыл бұрын
So many of those mechanisms are just so satisfying to see and hear in action. Thanks for sharing!
@monkfry3 жыл бұрын
How have I not seen this channel before?!!
@cushte49964 жыл бұрын
I was just thinking today, that i havent seen any recent uploads from Amy makes stuff. Thanks Amy!!!!
@AmyMakesStuff4 жыл бұрын
😁thanks for watching! (And for patiently waiting 🙃)
@ShellingtonLabs3 жыл бұрын
This is wonderful. I like the idea of having a neat set of references readily available and nearby.
@thisisridiculous3374 жыл бұрын
That is so cool! All of it! I have a tendency to overthink, watching simple solutions always feels eye opening.
@agentbey2 жыл бұрын
Fun watching your videos. I am enjoying your thought process.
@jaro69854 жыл бұрын
So much better than the stuff AVE tried to make. Didn't know counterbore was possible.
@himselfe3 жыл бұрын
Glad KZfaq decided to start recommending more videos about compliant mechanisms, because I would have missed this video otherwise. You have a really humble and informative style, and I think it's great! Would love to see more videos about compliant mechanisms, so have a sub from me!
@antonwinter6304 жыл бұрын
thanks for sharing that board with all the mechanisms
@isaacsmith16533 жыл бұрын
Glad you came across my feed! Love to see good creators suggested
@johnjackson97674 жыл бұрын
As someone who's getting more into mechanics, this is awesome. Thanks!
@sgtrock684 жыл бұрын
Yes, satisfying stuff. There's a bunch of short YT videos, I always have to hunt for when the subject comes up, where they demonstrate many different gear n linkage set ups, rotation to linear, driving an armature to follow a set path that's not circular and not simple reciprocating, things like that. Very satisfying and useful too. I needed a weird movement in a project and just could not think of a reasonable way to make to happen, but I knew somewhere in all those machine motion videos there would be something to spark the answer, and it did. Your detent mech is one I've used. Humm I should finish that project I guess...it's only been 5 years. Thanks. Cool video.
@mikej90624 жыл бұрын
Really neat I wish there was such a video for wooden mechanisms -- lots of these rely on material plasticity but they are still cool
@nosferathu2583 жыл бұрын
I have been blessed by the algorithm gods once again. Top notch content.
@yoashuain12 жыл бұрын
I love this, new to me, world of Compliant parts and mechanisms.
@pietrotentor75484 жыл бұрын
the people who put not like don't understand how much beautiful are those mechanisms and well done
@adamreynolds38632 жыл бұрын
that gripper is insane!!! Wow.
@KJFMZ Жыл бұрын
I've favorited this for future reference. Phenomenal stuff. I really love the pet feeding schedule, so simple yet so clever.
@andrewjmark1003 жыл бұрын
Great job show casing all of this I didn't know this kind of work was possible on a laser cutter.
@lfmtube3 жыл бұрын
Excellent video. Inspires me and gave me an idea on how to solve a mechanical problem with a prototype. Thanks!
@kadenzxc4 жыл бұрын
I love this! I've been neglecting flexures in a lot of my own stuff, and they would really be great additions in a lot of places. I subscribed because of this video. I really want to apply this with water jet cutting on steel. The butterfly torsion spring is my favorite and it would be really useful to me in steel, which is strong and can stay strong for billions of load cycles.
@Mukeshmiktecrep4 жыл бұрын
Those snug fitted slotted machines are so satisfying when they click and hold position
@robertsimpson46934 жыл бұрын
Ms. Amy, I just came across this VIDEO. This is excellent work to show such things in Demo Form. This shows an "orderly and curious" mind. I am an immediate subscriber and will be following your work. - Robert
@DJDevon34 жыл бұрын
This video featured on Adafruit's blog today. Awesome mechanical engineering stuff. Very cool video!
@rock3tcatU2334 жыл бұрын
1:53 We use that one a lot in opto-mechanical structures, especially in the semiconductor industry.
@memesfromdeepspace10754 жыл бұрын
For gyroscop if not wrong
@xxportalxx.4 жыл бұрын
Aahhh I was just about to bring up MEMS
@andrewmanti2354 жыл бұрын
@@memesfromdeepspace1075 accelerometer
@Rotem_S4 жыл бұрын
Really nice stuff, you seem like you're going to get really popular soon
@whatdidshilinmaketoday2 жыл бұрын
your mechanism designs are elegant and very efficient, I really look forward to see more!
@godetaalibaba25223 жыл бұрын
That's some really cool mechanisms, I'd love to learn how to make and use stuff like that to solve any kind of problems 👌
@mikabreto4 жыл бұрын
Gripper closure action made my jaw drop a little.
@denysshevchenko75953 жыл бұрын
Well done Amy! Nice work
@DeXoDeD4 жыл бұрын
Your video caught both babies (4 and 2 years old) attention for the whole time, and now we are going to try some too :D
@3DPrintingNerd4 жыл бұрын
KZfaq just recommended this to me. It's wonderful, and I'm not subscribed!
@Vandel2123 жыл бұрын
All of these things can most likely be done with a 3d printer.
@LeoStaley3 жыл бұрын
@@Vandel212 a that's basically the only way that they can be made.
@kennykd973 жыл бұрын
@@LeoStaley she said she cut them out iwith a laser
@zyzzyva3033 жыл бұрын
What you said. Also, not surprised to see you here.
@HackMonkey3 жыл бұрын
Ditto! That gripper is super cool! First thought was, it can't hold anything. Then mind blown, it can hold everything!
@glennmccall22732 жыл бұрын
Great job with this! I have found that annealing some plastics in an oven after laser cutting increase its resilience to brittle fracture, actually eliminates it in fact. If you are ever ever looking for someone to help bounce ideas off of for mass production or design for manufacture feel free to reach out to me. I have over 13 years in plastics component design and manufacturing and am looking to broaden my side project reach and network.
@Meccanokinematics3 жыл бұрын
Great vid. I like the gripperdesign and specially the gripper tips.
@First_Class_Amateur4 жыл бұрын
Where have you been all my life! Great job!
@HenryKamp3 жыл бұрын
Really attractive, clever, thoughtful design. I love the cat feeding tracker!
@AdamPNelson3 жыл бұрын
Thanks for showing this engineer something new!
@wouter12wpp3 жыл бұрын
You gave me alot of ideas for projects, thanks!
@alechart4623 жыл бұрын
I don't know how this channel has slipped my knowledge for so long, and I freaking LOVE the content this time especially; Yes, PLEASE make a kit available in some way, even if you simply provide the STL's for the gripper, I'm interested in making it smaller but that design is so ingenious! I know several things have been coming up using similar methods, but for a 3d-printed take on the topic, it fits perfectly I think. Anyways, hoping you share or something similar! Subscribed.
@olleronstad34064 жыл бұрын
nice demo on compliant mechanisms
@TheWatshingMan2 жыл бұрын
This is exactly what I've been looking for! Thank you so much ^^
@ethanmiller36494 жыл бұрын
This is fantastic! The example board is phenomenal, and I really like your gripper. Super cool stuff. Also, thanks for sharing all the cut files!
@dustyfisk18874 жыл бұрын
Beautiful mechanisms, thanks for sharing! Excited to see your other projects now.
@adisharr4 жыл бұрын
Nice demo Amy, nice to see all these different types in action. Looks like quite a few can be 3D printed as well although they might not hold up as well.
@SciStarborne4 жыл бұрын
Lasering the counterbore really leapt out as something for me to try!
@Ree19814 жыл бұрын
It's just a busy board for adults you know?
@joshplayseve4 жыл бұрын
Countersink* Counterbores have flat bottoms
@AmyMakesStuff4 жыл бұрын
I’m just etching a solid circle, so I think I can count it as a counterbore in this case!
@joshplayseve4 жыл бұрын
@@AmyMakesStuff Oh okay, you're definitely right. My eyes are just bad. Also I love your videos! You're incredible.
@AmyMakesStuff4 жыл бұрын
@@joshplayseve I DO think cutting countersinks with a laser, maybe by etching successively smaller concentric solid circles, or maybe rastering a circle with a gradient from white to black in the center, would be super slick!
@CarlBugeja4 жыл бұрын
Awesome work! I love that gripper design!!
@srtcsb3 жыл бұрын
I would definitely buy a gripper kit. This is an excellent design, and I could use it for model making and other tasks. Looking forward to more videos like this. Thank you.
@FunkyDeleriousPriest4 жыл бұрын
This is really impressive. Thank you so much for sharing! 1/16" acetal is the material I laser cut the most, but I haven't ever tried making any mechanisms like this. Your work is brilliant!
@cabbageman3 жыл бұрын
I need this kit in my life!! Would buy for sure (also your cat food mechanism neatly solves a common problem in my household) I need!
@neuromanglers2 жыл бұрын
Great video ! I was thinking about something similar to the cat feed tracker. Loved your presentation using the board. Of course....now I am a subscriber and look forward to more ....thanks
@Markfps4 жыл бұрын
This is amazing! Amy, you deserve many more subscribers! I'm in!
@mohe8110 ай бұрын
Very cool demo board! I should really use flexure mechanisms more. Not only do they work great for a surprisingly long time, they also make pretty nice designs.
@Tech_Marauder10 ай бұрын
I mean that gripper at the end could be a single part by utilizing flexures more
@horiap774 жыл бұрын
Super nice we want more like this :)
@shingabiss4 жыл бұрын
I think you are brilliant, a mechanical genius! I have developed a few latches but you've taken it way beyond that! I'm currently using neodymium magnets as 'springs' and 'latches' in making things.
@brianh2564 жыл бұрын
These mechanisms would be awesome for 3D printing. I really think the grippers are pretty cool.
@SRG-Learn4 жыл бұрын
Really awesome. Very smart to have a board with some examples, also flawless production. Thanks for sharing.
@rjw37374 жыл бұрын
What a excellent job! 정말 훌륭합니다. 엄청난 자극을 받았습니다.
@hanyanglee90184 жыл бұрын
I watched for 40sec and I clicked the bell. This is awesome.
@ChrisgammaDE3 жыл бұрын
Awesome use of compliant mechanisms!
@SeamusHarper12344 жыл бұрын
My local hackspace is raising funds for a laser cutter, this inspires new action! Also, i really like your voice, its another + for the vid.
@SiliconeButts4 жыл бұрын
I'm gonna use what you showed me to 3d print a fidget cube with fantastic tactile feedback.
@benowzinsky53943 жыл бұрын
Coool. :) THIS is the sort of stuff the internet SHOULD be used for.
@skellious4 жыл бұрын
wow, these look so beautiful and functional at the same time!
@handmadeisbetter4 жыл бұрын
These mechanisms are really awesome! And mesmerizing too 😆
@rikilshah3 жыл бұрын
These are awesome! Thank you for sharing wonderful design ideas.
@fliegerhorst76884 жыл бұрын
Haven't see such cool content for weeks!!
@pinaz9933 жыл бұрын
Awesome engineering chops!
@MrJbaker0204 жыл бұрын
That was so cool. Excellent video.
@_tiredofidiocy_3 жыл бұрын
Thanks! Thats awesome, all parts printed with factory-level quality
@davidcahan3 жыл бұрын
Satisfying...great description!
@Spence19764 жыл бұрын
Cut an opening in the base of the finger triangle of the flexi gripper so that there is no solid mechanical connection between the two pivot points, that will make the fingers more flexible :)
@noisytim4 жыл бұрын
Damn, that’s cool! Especially the gripper 😃 Thanks for sharing the files !!
@Ashnek343 жыл бұрын
Great! I loved the board with flexures.
@SASunDog3 жыл бұрын
I would buy this gripper. It makes my brain smile.
@danielmace4064 жыл бұрын
Cool stuff, Amy!
@C3DPropShop4 жыл бұрын
Really cool content. I could see your channel taking off. Great work!
@MakerProjectLab4 жыл бұрын
Brilliant designs, Amy. Thanks for sharing this.
@joaomanoellima59474 жыл бұрын
I can see those being used in lots of 3D prints, really nice!
@Hendreh14 жыл бұрын
Beautyfull .. the mechanics as well
@exl99974 жыл бұрын
This is really cool Amy! I myself am more into 3D printing, maybe mention that all of these examples can also be made using 3d printing? Also, maybe teaming up with some 3d printing creators will help you get more of the attention your channel deserves! Great video, keep it up!
@rafzan3 жыл бұрын
Real nice, thanks for the vid! Amy, it would be really nice if your could show us some practical applications for each of the mechanisms in the panel, just like the cat feeding one
@kiddfpv2 жыл бұрын
I’m actually gonna use some of these, this is awesome! 😁
@AmyMakesStuff2 жыл бұрын
That’s great! Thanks for watching!
@haruruben2 жыл бұрын
These are fun ideas 💡 this would make a fun toy 🧸
@johnsmith-oy9kx4 жыл бұрын
Don't stop, keep it coming, awesome mechanics, thank you...
@mronibi57113 жыл бұрын
Just came across this channel, and getting into 3d printing, this could be useful, good video aswell!
@DFX2KX4 жыл бұрын
that ratchet had a nice satisfying click to it. I like.