Replacing my Mercedes worn, flaking, and sharp steering wheel trim bezel.

No video

Replacing my Mercedes worn, flaking, and sharp steering wheel trim bezel.

Рет қаралды 121,151

5 жыл бұрын

How I removed and replaced the steering wheel trim frame bezel on a facelift W204 C204 Mercedes-Benz C-Class C250, C300, C350, C63.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links and make a purchase, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Where to buy (silver one):
EBAY: ebay.us/s4ncNc
AMAZON: N/A
Where to buy (carbon fiber):
EBAY: ebay.us/ZDdiy5
AMAZON: N/A
Music Credit:
KZfaq - "Clean Break"
KZfaq - "Palmtrees"
DISCLAIMER: This video is not endorsed by, directly affiliated with, maintained, authorized, or sponsored by Mercedes-Benz. All of the videos on this channel are for entertainment viewing purposes only. Due to factors beyond the control of FlexxAlexander, I cannot guarantee against improper use or unauthorized modifications of this information. FlexxAlexander assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FlexxAlexander recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FlexxAlexander, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FlexxAlexander.

Пікірлер: 213

@TheFlexxGarage 5 жыл бұрын

FOLLOW ME!!! Website: www.FlexxAlexander.com Facebook: facebook.com/FlexxAlexander1 Instagram: instagram.com/Flexx_Alexander

@mahoneal3434 3 жыл бұрын

Hi flex just wondering do you have to remove both the positive and negative for the battery or just the one on the left side

@MrEduardomiami 3 жыл бұрын

Gracias , muy bueno

@douglaspilcher6121 2 ай бұрын

Great video. Short and to the point without a lot of extraneous garbage. Thanks for the help.

@TheFlexxGarage 2 ай бұрын

I try to keep cutting out fluff more and more in the videos but without missing out on important details.

@IKhanNot 5 жыл бұрын

You sir are a legend. This couldn't have come at a better time as the chrome piece on my C300 is peeling.

@jtambunga1 10 ай бұрын

Thanks, Flexx. I have a 2014 CLS 550 with the same steering wheel and the install went off without a hitch. I was nervous about messing with the airbag, so I really appreciate the thorough how to video. Definitely disconnected the battery first.

@jc9561 2 жыл бұрын

What is weird is how this situation is sooooo common. My GF went to the dealer and they wanted $500 to replace the part... Thanks for the video, it sure helps those of us who don't have money to toss around.

@DMT267 3 жыл бұрын

Perfect timing. C200 is just starting to do this on one side. Keep up the great vids.

@rayhux4245 2 жыл бұрын

Love your videos. Just got my 2013 C300. My 1st benz ever. Sadly the rear subframe is broken so im waiting for a new one to come. Ive only got to drive it 2 times since i purchased it. But i love watching all your videos. Thanks

@charlespatton9395 4 жыл бұрын

Just replaced bezel on my c250. Thanks a million!

@TheFlexxGarage 4 жыл бұрын

Nice!

@luism3389 5 жыл бұрын

I'm sure Mrs Flexx will be very pleased with the new trim 💯

@DeanOliver1964 Жыл бұрын

This video was perfect! It shows exactly what I needed to do to swap out the button clusters. Thank you!

@TheFlexxGarage Жыл бұрын

Glad I can help. 😎🤙🏼

@darod850 3 жыл бұрын

so happy i found this . my e350 has flaked all over. probably the sun.

@mygodisable2 5 жыл бұрын

As always great job. Yes Lady Flexx will be happy.

@431266237 4 жыл бұрын

You sir are a legend. Just did this today, followed your advice. I feel like I have a brand new car - all for the price of just the steering wheel trim piece! I got quoted $560 (Australian) for this job at the dealer. Felt so good to be able to do it yourself

@TheFlexxGarage 4 жыл бұрын

😎

@TheFlexxGarage 4 жыл бұрын

See...that’s the stuff I like to hear. Great job!! 😎🤙🏼

@chickens366 5 жыл бұрын

This has been such a huge problem for me! YOU ARE A GOD!!!

@ianbold2616 Жыл бұрын

Thanks again for another badass video! I'd like to see you do one on the replacement of the high pressure fuel pump.

@adlert6768 7 ай бұрын

Excellent video and delivery. You are very very good at this! Subscribed.

@TheFlexxGarage 7 ай бұрын

Thanks. I appreciate that a lot! Enjoy the content!

@tatumh.5051 3 жыл бұрын

Thank youuuu!!! I just did this for my 2013 C300 super easy because of your video!

@TheFlexxGarage 3 жыл бұрын

Glad it helped!

@JimyOfficial 2 жыл бұрын

No lights?

@ProjecTranceDJ 3 жыл бұрын

No nonsense, to the point. Great help. My battery is not is the engine bay though, i think they are under the boot (trunk) liner and there is two of em (c63) i hope by removing negative on both doesn't cause a problem.

@jetttskiman 11 ай бұрын

Awesome video man. There's a couple others on KZfaq that suck because they don't mention the battery disconnect.

@TheFlexxGarage 11 ай бұрын

That’s the most important part! If you don’t disconnect the battery or pull the airbag fuse, you run the risk of having the airbag cause injury. Plus disconnecting the airbag while the battery is still connected will cause an airbag fault stored as a check engine light.

@eos2143 2 жыл бұрын

Thank you very much!! I have to replace same stuff either; now I can do it on my own :-)

@ricardomondestin8724 4 ай бұрын

Thank you 🙏🏿, I’m definitely going to replace mine

@liwebguy 4 жыл бұрын

Great job!!!

@user-pt5xq8bq6h 5 ай бұрын

Love your content 🥰

@TheFlexxGarage 5 ай бұрын

Thanks. I appreciate the view!

@PS4GENIUSgaming 5 жыл бұрын

OMG THANK YOU, ive had that happen but idk how to fix it

@rabg28 5 ай бұрын

Brilliant videos

@zuffryahmedjeffry8373 5 жыл бұрын

Thanks for sharing bro. Even I have the same issue. Cheers Mate.

@mho1981 5 жыл бұрын

I just did this today because I cut my finger last week. Thanks!!!

@niftymediasa Жыл бұрын

Epic video 🙌🏻😎

@ladoppiobemolle 3 жыл бұрын

Thank you so much. I succeeded thanks to this

@TheFlexxGarage 3 жыл бұрын

Nice

@pantro1996 4 жыл бұрын

I hit likeeeee please do more for this car or tell me where you get your info please!!!

@chriscanada4744 Жыл бұрын

Thx for this!

@innovationpropertyatlanta Жыл бұрын

Life saver!!

@cawag98 4 жыл бұрын

I can't believe this is an issue with these cars. I had a 2004 C 320 and all the plastic was much better - especially in this most basic of faults - sharp plastic! Thanks for the video. Q: How about just sanding the rough edges down carefully. Has anybody had any luck with this, especially without removal first. I say this with a bleeding thumb at the moment!

@xx.1. 5 жыл бұрын

Same thing happened on mine but alot worse when i bought my car. So took it off sanded it all down and painted it gloss black 👌

@mattgodwin4712 3 жыл бұрын

Really useful video dude, many thanks! Just changed mine on my E-Class Cabriolet for an AMG Trim, and looks great! (Airbag removal was a real bitch though, but got there in the end!)

@TheFlexxGarage 3 жыл бұрын

I've taken my airbag off like a billions times...so that's why it looks easy. I remember my first time...it was a pain too.

@brgable 2 жыл бұрын

Any tips on finding where those clips are? This is my first time and I really don’t want to pay someone to fix it when I’m sure I can.

@simongillespie Жыл бұрын

Terrific - worked like a dream (although I couldn't unplug the airbag... how does that clip work???).

@fastfoodrocks Ай бұрын

If you have an ML350 W166 (mine is a 2014) where the bottom part of the spoke does not go to the center but splits to approximately the 8 and 4 o'clock position, then the screws on the back are T10, or you can also use a T9. I could not find this information anywhere so it was a lot of trial and error for me, I started with a T15 and went up, but turned out I should have went down. I thought my screw was stripped so since I was going to replace the bottom bezel anyway, I cut it up with tin snips, then broke apart the bottom bezel until the screw on one side released due to the plastic breaking. Then I was able to easily unscrew the other side once I angrily realized it was a tiny T9 or T10 bit that was needed! Also for mine I did not unplug the battery. I carefully kept the airbag connected and routed through the opening of the steering wheel trim. Since the cable is relatively long, it's pretty easy to work with replacing the trim while the airbag is still connected. Plus on the W166, the battery is under the passenger front seat! Why?!

@J_S591 5 жыл бұрын

Thanks Flexx. Is there any way you know of for retrofitting illuminated vents and mirror puddle lights like those in the Extended Lighting Package? Your illuminated door lights tutorial was ace, I’d like to add these two extras too though.

@davidbackus2944 Жыл бұрын

Thank you Sir!

@Ahmad.Hoseyni68 5 ай бұрын

I liked this video, I’m going to replace mine too👍

@TheFlexxGarage 5 ай бұрын

Cool 👍

@romankantor1326 4 жыл бұрын

Hey Alexander, thank you for the video first of all. Quick questions, does the steering wheel must be in a straight forward position in order for the airbag to pop?

@210GQ 5 күн бұрын

Thank you

@calspeed1 4 жыл бұрын

Good vid. Thanks

@richlee8210 2 жыл бұрын

Got it done bud.

@Vishneyi Жыл бұрын

Thank's much 🙏👍👍👍

@sherifhegazy5321 3 жыл бұрын

Thank you very much! Cut my fingers several times already with these annoying sharp edges. Just ordered the trim from Amazon. Can you please tell me if disabling the car battery will cause any issues? I read online that it could screwup the window settings and other things that could need a dealer to fix.

@JimmyBumpkin 5 жыл бұрын

So, I just fitted a similar CF item to my C250 Coupe - would so much prefer this clip in (mine is a self-adhesive garnish) looks sweet but not as OEM as a replacement part....

@pauleknight 2 жыл бұрын

So amazing. Was wondering if you had a source for the parts? I would like to replace a black bezel that is loosing its black "paint" and the switches. thanks a million

@brookecash20 2 жыл бұрын

Couldn’t figure out what this was called lol! Need for my c350 thank you!!

@davehooker3 4 жыл бұрын

Flexx, how did you do the star black on the wheel hub?

@fakmenow 5 жыл бұрын

Did not even know our steering wheel bezel does that. What is it caused by? Heat and moisture? And GOD DAMN $284 for carbon fiber one is too insane!

@57RollsRoycePhantom 5 жыл бұрын

Gnius ya they must be proud of the product 😂😂.

@TheMontesku 4 жыл бұрын

hello, a question. it fit in the flat steering wheel or is it for de round one in a coupe c 180 2013. ? thanks

@punkspop 2 жыл бұрын

I've owned 3 2012-2014 C and E classes. I'm actually astonished that Mercedes didn't fix that after the first year of this model steering wheel. Just so not MB. Add in the flaking of the black "paint" on all of the buttons and it really diminishes these models. However, I really dislike most of the body styles after 2014 so I'm glad there is a fix for this. I picked a C300 up from the factory in Sindelfingen and within two months the driver window button was flaking.

@TheFlexxGarage 2 жыл бұрын

Yup. And the sad thing is…my 2016 c300 has a silver trim/button to open the center armrest and that trim already started peeling/bubbling within 30,000 miles. They covered it under warranty but like come on guys.

@punkspop 2 жыл бұрын

@@TheFlexxGarage thanks for instruction video. I ordered a carbon fiber trim and I’ve never even thought to see if it could be replaced. 👍🏼

@Brizzy-ul3gy 3 жыл бұрын

Flex can you remove the plastic air bag sign at the bottom of the v in the steering wheel as I want to replace it with a Mercedes silver badge ?

@tofalshammari9150 10 күн бұрын

Thanks❤

@TheFlexxGarage 10 күн бұрын

No problem

@Eddstar83 5 жыл бұрын

Does disconnecting the battery mess anything up? like sensors? or is it fine no issues? Have ordered replacement which I plan on doing just wondered f there were any possible issues that could arise

@kidfoodieusa3806 5 жыл бұрын

Flexx have you gotten the taikta airbags out of your c250 my Mercedes dealer says they don’t have the new safe airbags for my c250

@joserobertogallegossanteli7248 3 жыл бұрын

Any airbag lights should i worry, if i try this on a glc 300, to replace the steering wheel buttons.

@brianu33 Жыл бұрын

I have 2015c300. The volume buttons are worn off. So I def have to remove the way you did right? Is there any other way. Like pop off the button like it’s snapped on. Kind of like a computer keyboard button . Thanks

@sammarshall6748 3 жыл бұрын

Alexander my airbag didn't pop out but its lose in the steering wheel, can't push it back in and it won't come out, can you help with this? Tried my best, might need a new steering wheel at this rate.

@salvatoresessa4431 5 жыл бұрын

Flex how to install led courtesy on the mirror extern

@kemalakdag520 5 жыл бұрын

Please do air vent led like c or e class

@servipasto 5 жыл бұрын

hey budy, great video as always, I been able to perform lots of things thanks to your videos, thanks so much, you always come up with neat stuff and useful ones like this one, how ever I had my finger sliced but not on the steering wheel vesel but in the lever to move the seat on my 2012 coupe, I have not seen any videos on how to remove this piece or even where to get a replacement part for it, do you have any information you can share, thanks a lot again, keep up the good work. later and greetings from Chile.

@TheFlexxGarage 5 жыл бұрын

If you read my replies to some of the comments in this video, I mentioned that happened to me too. I don’t really know how to remove it. All I did was peel off the chrome as much as possible so the white plastic is exposed. And then I put gloss black vinyl wrap over it. Worked for me.

@servipasto 5 жыл бұрын

@@TheFlexxGarage Hey thanks for such a quick response, I thought of doing something similar, but before doing it I wanted to know what you can tell me about it. thanks....

@SoAmaazing10 2 ай бұрын

I need to replace the buttons. Do they just pop out?

@kipking511 4 жыл бұрын

Lost me at Remove the Airbag LMAO!!!!!!!!!!!!! Great Vid though, I will contact my local Mercedes Benz Dealer and be taxed to high heaven for it LOL

@adrianjulio25 10 ай бұрын

How about the Emblem that's on the airbag. Thank you.

@crashthedon7884 5 жыл бұрын

Which would you recommend magnaflow or flowmaster?

@elkanahwallace6573 Жыл бұрын

Does this work for 2017 gle 400? I'm not mechanical at all so any recommendations for service in Palm Bay FL Are?

@MixFriday 5 жыл бұрын

Same problem. Also on back button on wheel. Already bought new trim, but still looking for these button. Thanks for tutorial dude) but should I unplug “+” on battery or just “-“ ?

@Maxwell-jn4te 5 жыл бұрын

Negative is enough, because the car body is connected to it. Electricity flow to components through wires, then flow back through car body. Unplugging negative will cut the circuit. Even sometimes you want to unplug positive for some reason, it's recommended to unplug negative first. Because when unplugging positive, wrench may accidentally touch the car body, creating spark. All modern car connect negative to car body, some very old or special car may need to double check.

@xx.1. 5 жыл бұрын

Also. Does anyone know where to purchase the AMG logo for the botton to replace the one stating "Airbag" on?

@Rkhoi 4 жыл бұрын

HELPHow did u remove that yellow connector, I'm doing it on my cla 45, I'm stuck!!! Help

@theflashnky 4 жыл бұрын

Thanks for this video. I have a strange question I wonder if you can answer. After having BMW's for many years I've gotten used to the radio controls on the left side of the wheel. Do you think there would be an issue switching the wires for the buttons? I know the buttons themselves can't be switched and they would not be labled correctly but I really want the ability to control the volume with my left hand. Also, have you replaced the drivers vent? I need a video for that too. Thanks

@SamAbraham 4 жыл бұрын

haha it’s funny you say this I drive an E92 and a W204 and I regularly press the wrong buttons in both cars

@sniperelite1727 9 ай бұрын

Salut je voulais te poser la question sa fait 1 ans j'essaye à résoudre mes j'arrive pas, enfaîte sur ma mercedes w204 de 2012 le bluetooth et le GPS est partie du jour au lendemain ? Est ce que tu peux m'aider à résoudre le problème ?

@ReverbCanvas 4 жыл бұрын

Guys I have a problem with my buttons. The left ones are kinda sticky (bought a used model) they work, but you have to press them sturdy. Do I need to replace them or can I just clean them somehow?

@jeffharris9620 3 жыл бұрын

I have a CLS 550 that has a second auxiliary battery, do I need to also disconnect it as well before removing or taking out the steering wheel bag?

@TheFlexxGarage 3 жыл бұрын

Not 100% sure on the CLS but most Benz, the aux battery is only used for small functions like the start/stop function, serves as backup to the gear selector, heated seats and some other command functions. I’ve taken apart the steering wheel on my 2013 c300 and my 2016 c300 without having to disconnect the aux batt.

@GinelieIraola 3 ай бұрын

It’s sold out on eBay, any other recommendations?

@TheDougJohnson 2 жыл бұрын

I'm having a very difficult time trying to remove the airbag on a 2013 C250. Mine didn't have holes in the back of the steering wheel, it had indentions. So I stuck a screwdriver in and pressed all over inside there and cannot seem to pop those clips. Any advice? How far to stick in? What angle? Anything else I'm not considering? UPDATE. I finally got it. Best to use a Flathead or even a Allen head. Put the steering wheel with the top point of the Mercedes emblem pointing straight up. Then the angle of the screwdriver should be parallel with the surface of the steering wheel and using the left and right points of the Mercedes emblem as a guide, from the indention or hole, push the screwdriver towards the center point of the steering wheel.

@moeyishak1618 Жыл бұрын

Hey mate, I drive a 2013 C300. I’m in Australia so probz a diff spec than American ones. I tried the whole process everything works, but I have the airbag light on and a restrain system malfunction… any advice on it?

@TheFlexxGarage Жыл бұрын

Not sure. The replacement has nothing to do with those error lights. On my car, sometimes when my battery is low or I disconnect the battery, when I reconnect it…I’ll get an airbag light and I think traction control error light but they go away after I drive the car for 10-20mins and the battery charges up.

@DaniiCEO 5 жыл бұрын

The same thing happened to the handles to get to the back seats and I’ve had to put tape on it because it cut up a friends hand pretty bad. Any idea as to what to do for that ?

@TheFlexxGarage 5 жыл бұрын

Same thing on my coupe. I cut my shoulder several times going into my back seat to clean it. I peeled off as much of the chrome from the handle and then I wrapped it with gloss black vinyl wrap. So far so good and looks better.

@DaniiCEO 5 жыл бұрын

Flexx Alexander thanks man, the chrome is a real safety hazard lol

@JimyOfficial 2 жыл бұрын

Hey, no issues with airbag lights or anything because of unplugging it?

@TheFlexxGarage 2 жыл бұрын

Not if you disconnect the battery like I mentioned in the video.

@USMC-oc1lx Жыл бұрын

Have trouble with infotainment buttons pealing, can they be replaced just as easy as yo did the steering wheel buttons?

@TheFlexxGarage Жыл бұрын

They screw right off but you gotta change the entire button and it’s electronics. I don’t know if you can pop off the buttons alone.

@xrisos1397 5 жыл бұрын

For more safety after you disconnect the battery leave the car for half hour with opens doors in order to be full discharged...

@brandonmedinah2956 6 ай бұрын

I got a left malfunction code for the air bag for disconnecting it. Gonna do the Scanner tomorrow see if it erases the error code. Also you can try and disconnect under the seat the yellow i believe for the ai bag to see if it does anything

@TheFlexxGarage 6 ай бұрын

Most people get an error cause they didn’t follow the most important step which is to disconnect the cars battery before doing anything. If you did do that and still got an error, then there’s a faulty connection.

@brandonmedinah2956 6 ай бұрын

@TheFlexxGarage Yeah I Disconnected the battery before doing anything and fuse also looks good.

@TheFlexxGarage 6 ай бұрын

Sometimes it’s just a matter of driving around and letting the car relearn/recharge the battery. I don’t recommend you drive around with the airbag light on.

@brandonmedinah2956 6 ай бұрын

@TheFlexxGarage Yeah that's what I believe also , they told me to disconnect the battery and leave it for 30 min and reconnecting it again but that will be after I drive for a while to see if it relearns it. If not I'm giving the dealer a call

@999dallas 6 ай бұрын

@@brandonmedinah2956did that work?

@joelwheeler5050 4 жыл бұрын

My 2013 e350 has paddle shifters do they need to be removed, if so how do I do it.

@TheFlexxGarage 4 жыл бұрын

Has nothing to do with paddles. My steering wheel has paddles.

@CBKFahim 2 жыл бұрын

Bro I been trying to move the airbag for so long and do it lol

@efekaynar1350 2 жыл бұрын

Mine doesnt have those holes, rather a cavity

@callumbrown6751 9 ай бұрын

I know this is an old video and hope you’re still replying to comments. Just done this on my car, but since reconnecting the battery some of the electrics seem to be playing up. Wing mirrors now don’t fold and the windows won’t go up properly (almost as if it things something is stopping it as it retracts back down). Any advice please!

@TheFlexxGarage 9 ай бұрын

Never happened to me in all my times of disconnecting batteries from multiple cars from different brands. I’ve been told just drive around, start and stop the car a few times through normal driving, the ecu will relearn and everything will correct itself. And for the windows/mirrors, there’s a relearning process you can try. There’s tons of KZfaq videos on them. kzfaq.info/get/bejne/nMeVd62L1qm1dY0.htmlsi=Hrdq83W1vd4_9vVA kzfaq.info/get/bejne/h59gZJmGuNu-h6s.htmlsi=bcrZoHhjwnUWMA1R

@aiyanshaikh1754 8 ай бұрын

This is late but the windows require a basic reset. Just have all the windows on closed position when power on. With all 4 fingers hold the windows up at the same time. Stay that way for 7-8 seconds. So it knows the final close position. It'll auto close normally

@straightsixvic 2 жыл бұрын

Hey flexx. I also have a screen from dmp car design and after I disconnected the battery and reconnected it. The android screen won’t turn on?

@TheFlexxGarage 2 жыл бұрын

I don’t know. You need to contact them for support. I’ve never heard of that happening before.

@straightsixvic 2 жыл бұрын

@@TheFlexxGarage thanks flexx. The screen actually ended up turning on after starting the car like 4 times and letting it run for a while

@TheFlexxGarage 2 жыл бұрын

Probably the car battery was weak and didn’t have enough juice to turn on all the accessories of the car (including the screen)? I don’t know. You should let DMP know anyway.

@nesscog2287 11 ай бұрын

Is it enough just to disconnect the minus cable on the battery?

@TheFlexxGarage 11 ай бұрын

Is it enough what? Enough to kill the power to the car? Of course it is. Unless you have another power source that’s still connected that you don’t know about.

@matthew2741 Жыл бұрын

Hey flex i recently did this same trim replacement, when disconnecting the airbag and then reinstalling it after i secured the bezel, my airbag seems to not be connected and i get a malfunction notification, is there a wrong way to put the airbag wire in?

@matthew2741 Жыл бұрын

c300 2014

@TheFlexxGarage Жыл бұрын

1) did you disconnect the car battery before removing the airbag? And did the battery stay disconnected when you reinstalled the airbag?

@matthew2741 Жыл бұрын

@@TheFlexxGarage i mistakenly forgot to disconnect the battery during the installation, is there any way to resolve that or will i need a new airbag?

@TheFlexxGarage Жыл бұрын

Umm yeah. You took a huge risk by playing with the airbag while the car is connected with power. That’s like changing a lightbulb while a lamp is still plugged in and the lightbulb is turned on. You are very lucky nothing bad happened. If you did what you did….As soon as you disconnected the airbag, you created the fault in the cars computer making the computer think the airbag has failed because the airbag is no longer sending a signal back to the computer. The only way to fix it is to get a OBD2 code reader and clear the fault code. Some autozone might do it for you but you might have to get your own code reader or you need a shop to do it. If you disconnected the battery, you can unplug or plug anything you want and the computer of the car won’t care cause it’s basically asleep with no power. Please take this as a lesson learned. Last thing I wanna hear is somebody getting hurt because an airbag blew up in their face.

@fayzaanshabbir 5 жыл бұрын

Could do 1 for w212

@OtavioAvesani Жыл бұрын

I am planning to do that on my 2013 E350. The steering wheel/Bezel looks exactly the same. Do you have any suggestion?

@TheFlexxGarage Жыл бұрын

Not sure. I wanna say they are the same steering wheel but I’m not 100% sure exact. However the process is exactly the same.

@OtavioAvesani Жыл бұрын

@@TheFlexxGarage Thank you! By the way, your video is awesome!

@ep8611 Жыл бұрын

I didn’t know about this issue till I cut my finger on the frayed edge. What diameter screw driver to insert in the 2 holes?

@TheFlexxGarage Жыл бұрын

Don’t really need a specific screwdriver. You just need something that’s skinny and long enough to pierce the sides and push the tab to release the airbag. Even a skinny rod will work.

@ep8611 Жыл бұрын

@@TheFlexxGarage I tried for 5 minutes and didn’t want to damage the vinyl I put the screw driver through on both sides. I can’t get either side to release.

@ep8611 Жыл бұрын

Any idea where I can get a pic of the clips on both sides without the vinyl cover so I know what I’m pressing on with the screw driver?

@TheFlexxGarage Жыл бұрын

Go watch this. He points to the metal straight wire on each side that needs to be pushed. kzfaq.info/get/bejne/iL1iltqi0ryqgX0.html

@Sbcinho Жыл бұрын

Bro I cut myself so bad mid drive from Aspen to St. George, 4 hours deep and went through like 3 napkins -__-

@jroberts5268 4 жыл бұрын

I’m having trouble with removing the airbag, battery off but airbag will not pop out for me when I push on it w screwdriver

@kasynstone733 3 жыл бұрын

I’m having the same problem did you ever figure it out

@nicolasrodriiguez 3 жыл бұрын

I got the left popped off right now.. right side won’t budge

@sammarshall6748 3 жыл бұрын

Did any of you sort it out? Both sides on mine haven't popped out, but they're loose, can't even push it back into place now

@abubakarsamoon1552 2 жыл бұрын

if you are using a bit screwdriver, try a different bit that goes all the way inside the hole, slightly press and then push towards the front (facing yourself) and it should pop out.

@gengpan 4 ай бұрын

I dont find the screw holds behind the wheel.....BENZ CLA250 2018

@SoAmaazing10 2 ай бұрын

There is 4 clips on the bottom half

@nivekqp Ай бұрын

im trying to install a carbon trim but I can’t find the clip inside the little hole what way do I have to push the screw driver or how do I know I’m putting it on the right spot

@sammyktm6279 17 күн бұрын

Me too

@Wavyypxter 7 ай бұрын

Do you happen to know how to change the buttons? I took out the trim and the buttons shell but the button are still in the shell and idk how to pop them out. Please help

@TheFlexxGarage 7 ай бұрын

Don’t know. Not sure if they are meant to be changed. You might need to change the entire piece that houses the buttons. 🤷🏻‍♂️ There are aluminum button overlays available on eBay. They have double-sided tape and the button overlays goes right over the oem buttons. I installed some on my friends car and it actually looked good and it worked well.

@brandonmedinah2956 6 ай бұрын

To change buttons you have to push up with any finger holding the button so you can reach the two sides where you can see white on the back of the buttons also some are on the side, when you have the button up you then put the flat head screw driver on one side of the white clips towards inside when you push the white thing push down unclipping but not really you push down until it feels like it's unclipped might feel pressure on the other side cause it's holding on to the other side and then just do the other side and at some point you will see that if it feels like it's out on one side the other side needs to be like the side you started holding it up and kinda unclipping it by putting the flat head into it by the white clip...after the button that is alone on top on both side it's either the 1.go back and the to 2.speak button I believe those are easier you do the same just push it back in when your done putting the new one it has its own place where it holds on top of the other buttons. When you take them off there is going to be some white plastics inside each button save them you have to put them back in when putting the new buttons in.

@999dallas 6 ай бұрын

So you don’t even have to remove the airbag or anything to do this?

@TheBarking2 5 жыл бұрын

Is that the original steering wheel? I don’t have that problem yet, but if it ever comes to that, at least I’ll be prepared.

@TheFlexxGarage 5 жыл бұрын

Yes. As mentioned in the video, this flaking problem is a known issues in the c-class. And it will get sharp and you can cut yourself pretty bad on it.

@tiloalo 5 жыл бұрын

@@TheFlexxGarage somehow it look different on mine. It's the model after 2018 and it's 2 parts, one in aluminium and one in black plastic, not full aluminium like yours

@SamAbraham 5 жыл бұрын

Tito Alo If u have a 2018 u have a W205 C Class

@pump8686 4 жыл бұрын

Is there any website that sells the carbon fiber one cheap? On Ebay, most of them are close to $300

@TheFlexxGarage 4 жыл бұрын

I haven’t seen any. The only thing I saw are carbon fiber overlays decals/stickers. They look good but they’re don’t completely cover everything on the trim.

@pump8686 4 жыл бұрын

@@TheFlexxGarage Thank you. I might need to settle down with the OEM one.

@TheFlexxGarage 4 жыл бұрын

Why wont you just wrap it in like 5D carbon vinyl before you put it on then?

@pump8686 4 жыл бұрын

@@TheFlexxGarage that's a good idea. I should just wrap it on my current one. That will save me some money. Thanks!

@fatdoinks3374 4 жыл бұрын

Andrew Kim yo did you wrap the trim? I’m looking to do the same thing.