STRIX Nano Goblin: www.readymaderc.com/products/details/strix-nano-goblin-high-performance-fpv-plank-pnp

Better than all I've seen and used before. Thats really amazing this board. Thanks for the descriptive demo, Josh.

I put mine in a micro F-27. The original flight control board never bound correctly. Replaced it with a racing satellite receiver and a new esc with integrated bec and the aura. It flys amazing. And it was WAY easier to balance on the correct cg.

What a great piece of kit. You guys really have done some fantastic work for the hobby.

Awesome Josh, just hope we can still fly when I get mine since it will be on my door step on the 2nd of March grrrr

Thank you for this useful information

Awesome little unit. I think I am going to try one out

Josh didn't follow his usual advice to remove the prop while setting up and testing. :-O

Looks amazing

Thanks Josh from a Flite Test Egyptian fan

This is dope!

It awesome for what yall do would like to see how to put in the sea duck build that is what I would like to build myself here in the near future

Ahh! I literally just bought a Nano Goblin. I was considering going full iNav with it, but maybe this will be a good alternative too.

This song brings me back to the flitefest 2016 recap

as xjet has been doing lately, i'm confident you guys can master the sub 250g planes and keep people flying... should the need arise... I put in my comment to the faa, here's hoping for the best.

Nano Goblin is an AWESOME plane!

This looks like such an easy setup, and six-axis mode will help out a noob like me significantly.

Can you show a flight with that in the NG? I've been running a Runcam Split in mine and thinking of adding a Crossfire Micro RX so room is getting to be a premium. Would love to see just how much a stabilizer improves its flight. Thanks :)

You MUST be pressing the Aura's Bind button (at least I had to) WHILE powering up the Aura FOR the Satellite receiver to go into Bind mode. ( I do not see this step in this video at 7:22 )

I like this! It won't fly FOR me, but if I understand. It will help keep the PLANE (not UAV) from letting the wind throw it around too badly. God Willing, I really hope I'll be able to fly something with it. Carmine ✈🚂🚙

So easy to set up it's a dream I really hop you have a CRSF " crossfire " instillation guide. 🥃cheers🍻

Slick little board. Does it work with Crossfire? Or the newer SRXL Spektrum RX with telemetry? Also great videos.

Can we use tbs crossfire rx on this

Useful video, clear and with all necessary detail. Horrid music way too loud, however.

I don't know why they don't mention it, but if you want the computer software get it from Flex Innovations. The configuration software is common to all their products and it will recognize the board as a flite test board. Change the options to "advanced" and there is a whole bunch of cool stuff to play with. Next project....... model rocket stabilizer. Should be super easy to set up. Also, if you have any of the horizon hobbies 5 or 6 channel oem transmitters that normally are hard to use because you can't reverse servos on them..... No problem with this controller. Also, unlike my DX6i, which only has a 2 position switch, the stock transmitters have 3 position switches. Some of them anyway.

Bravo l'ingénieur ...... Y'a une place chez vous ?!

Will this work with TBS Micro V2 rx?

how do you set throws? Are they set for you by the board?

the link for the tuning video never came up and its not in your description.

Can this flight controller do differential thrust and elevons together?

Josh what spectrum receiver did you use and would it work for the recruit v2 thinking of ordering it for my first wing just getting into all this thanks for any help and advice

I just ordered an Aura 5. Can you design a Ekranoplan firmware? Something which allows roll and pitch to be nearly zerod out, and control to be reduced to throttle and yaw? I want to make a STEM/STEAM RC Flight series and the first project will be done in an urban school yard where true flight would not be permissable but faux 2D flight would be allowed. So the first week would be gyro stabilized ekranoplans. The second week would visit a near by public park with a thriving flight community where normal planes would be used.

Do a video how to put the arura 5 to the p 38

Does it only work for your planes

Lol. Looks damn close to my first build. Still haven't "flown" it. It bit me on the maiden. Lots of blood.

Maybe I missed it, but you got the flashing green light, and then did the change of servo direction for ailerons and elevators. But you didn't come out of the green light flashing mode, did you? Does this change of servo direction feature work while flying? IOW if you do a continual loop, I.e. holding the elevator stick full back, will the servos change direction mid flight? Or does it only work with holding the stick full forward?

Since those receivers your using are discontinued, what Spektrum receivers you recommend please?

Hi, I'm using a Futaba radio with SBUS. Do I also need to modify the travel for Aileron/Rudder/Elevator to 125? Haven't seen any videos to this effect for the Futaba. Thanks

Will these work with Flysky radios?

Is 6 axis mode for beginners? If so what does it do?

Nice, but there are a lot of flight controllers that do the same thing for half the price. For example, Hobbyeagles can be set up without a computer. Does this have more functions than one of those?

Will this work with your Flite test edge 540?

I would love to see a video on lipo voltage alarms. I know lots of people time flights, but I think that is too dependent on how you are flying. My alarms currently will get triggered with a momentary voltage drop and it is highly irritating, as I have to land and reset or listen to them beep. Any suggestions for me?!

Is there a reason why you use a satellite receiver?

Will this flight test Aura lite work with ar410 receiver by spectrum? The FT Aura lite will not get any signal from Dx6e transmitter ? Do you have any idea what could be wrong?

Will this unit work in large aircraft? eg. Spitfire 1600mm w.s.or a 2.2m Carbon Cub? 😊

Set up the Aura 5 lite as video instructs, but I have no throttle, can anyone assist?

So ive contacted customer support and at this point im just doing everything i can to get some helo in getting this figured out. I have a flysky i6x transmitter and a fs-ia6b receiver. I have them binded as descrived with the m to m servo wire. I have the gyro working but i havent figured out how to assign it to my 3 position switch. Im not sure if this is related to the issue im having but I suspect it does. My issue is this; the gyro works when tilting the wing but i dont have any control input from my transmitter, it wont move the ailerons or throttle... please help someone.

How can I add gps coordinates for the place I want it to fly. I research mines that I see on Google satellite. I can take coordinates, but how can I add that into rc airplane to fly the exact coordinate? It's safer and time wise to send rc airplane to research the place prior going there.

Do something on 3d printer

What is the name of this 2:22

Hey awsome product going to order some. When it the tune video coming out

Check you mixes!! Two important things not in this video. You can only see this in the Aura Config SW. The default aura config file has mixes for launch and level assist not addressed in this video. 1) Launch Assist elevator angle is pre-programmed for +30deg. You can adjust that in the Aura Config SW. That can be quite a bit of up elevator. Download the SW and adjust as you see fit. I reset mine for +15deg. 2) Level Assist has a pre-programmed mix for elevator vs throttle. At low throttle, the mix setting is -1deg. At high throttle the elevator angle mix is set for +12 deg. I could not figure out why I could never get Level Assist to keep my goblin flying level. FliteTest should document this. That +12deg up elevator was causing issues at high throttle. ie. up,up,up we went. I though it was the goblin, but a bit of it (most of it?? ) was that added mix that I didn't catch until I went into the Aura Config tool.

What protocol does the board take from the RX ? Sbus?

Can this be used with FLYSKY

33 secs ago... beatifull

Remove prop before doing this. Also, ready to range test it. Not quite ready to fly yet.

Prop prop prop.

Is ibus supported?

"Real easy to fly"... Look at my crushed Mini F-22..... LOLOLOL

sport cub s

Woo! First 50 comment!

First

Man... The background music is irritating.... BTW... It would have been so easy to put an Arrow indicating the front when the PCB was designed.

I wish you get rid of the annoying music and drum beats in your videos !

Commercials to start a commercial. 😑

I find the repetitious background track "music" really irritating. It does nothng for the videos. Please leave that out.

Who needs it. Most transmitters do flaperon/elevon mixing. You're still using that annoying music.

Lame. No example of how it works in flight.

Absolutely terrible camera work. Coordinate your camera work with your dialogue and you would be much better and actually able to follow with what you're doing. Especially with the newbies in mind

I'm really excited about the Aura5lite in my Mini Arrow. Now, after I tried to change the switch for the modes on my Spektrum DX 6e, I can't change the setting from 3 axis to 6 axis anymore. after going into the change menu and pressing the bind button the blue lite turns on, but turns green again as soon as I let go. And there is no reaction of the control surfaces as should be. Anybody knows what's the reason for that? Help is appreciated.

sport cub s

sport cub s

sport cub s