Float Switches | How do they work & Selection guide

Float Switches | How do they work & Selection guide | Tameson

Рет қаралды 145,377

Tameson

Күн бұрын

Пікірлер: 72

@nilshan7610 3 жыл бұрын

thanks for your helpfull information ❣️❤️❣️

@Tameson 3 жыл бұрын

Glad it was helpful!

@DinoOulai 3 ай бұрын

❤

@DinoOulai 3 ай бұрын

wat

@richardbrumant2684 3 жыл бұрын

simple, straight to the point

@BeOriginale Жыл бұрын

How to connect switch to turn off when the water in tank is full and to start when tank is empty? Do you have any simple picture how can i connect it?

@Tameson Жыл бұрын

Hello, you can find all the information about the wiring and setting up the float switch in our article: tameson.com/pages/float-switch-wiring

@danielteyehuago1633 Жыл бұрын

This is very educative, thanks for sharing it with us...

@Tameson Жыл бұрын

Glad you enjoyed it

@predragrukavina9694 7 ай бұрын

Thanks for detail desription...I need changeover float swich which can turn on in Lower possition and turn off on higher possition?where to buy?

@Tameson 7 ай бұрын

Hello, for your application, you could consider a bi-stable float switch, which is designed to turn on at a lower position and off at a higher position. This type of switch is ideal for maintaining a specific liquid level within a tank or sump. You can view and purchase our range of changeover float switches directly from our website. Here is the link to the appropriate section for your convenience: tameson.com/collections/float-switches Feel free to browse through the options, and if you need any further advice or assistance in selecting the right product for your specific needs, do not hesitate to contact us.

@mohamedimranimran3413 Жыл бұрын

Thanks for the video really it's very useful video sir...I've one question how much distance we need keep b/w yellow colour and blue colour??

@Tameson Жыл бұрын

Hello, if you use float switch with external weight the distance from the weight to the float switch depends on switch on and switch of level that you have in your tank.

@payol5 Жыл бұрын

Distance in the switch off when the tank is enpty

@jim9520 8 ай бұрын

Thank you very good video.

@Tameson 8 ай бұрын

Glad you liked it!

@markod120 Жыл бұрын

question: I work with two switches, one for min and the other for max water tanks. Is it normal for both switches with weights to float, i.e. the min does not sink?

@Tameson 11 ай бұрын

Hello, thank you for your question. Please send us an email (support@tameson.com) and tell us what product (ref.) it's about so we can answer your question. Thanks in advance!

@danielteyehuago1633 Жыл бұрын

Thanks for sharing it with us,..

@Tameson Жыл бұрын

Thanks for watching!

@MercedesMechanic 8 ай бұрын

I need something like this to work with a US Solid ball valve. When the float is down I want power to go to the ball valve so it will open. When the float reaches the top of the tank, I want it to cut the power to the ball valve which will leave it closed. Will this work like that?

@Tameson 8 ай бұрын

For your application, you could consider a float switch that is normally closed (NC) when the float is down and opens the circuit (cuts power) when the float rises. This type of switch will allow power to flow to your US Solid ball valve when the water level is low, causing it to open, and will cut the power, leaving the valve closed when the float reaches the top of the tank. Please ensure to verify the electrical specifications of the ball valve and the float switch to ensure they are compatible. You can find more information in our article: tameson.com/pages/float-switch or write on our support email support@tameson.com

@user-uj3bp7ek7s 6 ай бұрын

What is the fill range of the float switch? We are looking for a range 60 to 70 inches.

@Tameson 6 ай бұрын

We have options that can accommodate a fill range of 60 to 70 inches. I recommend visiting our float switch selection guide for detailed information: tameson.com/pages/float-switch-for-water-tank

@OthmanAlikhan 3 жыл бұрын

Thanks for the video =)

@Tameson 2 жыл бұрын

Sure thing!

@robgnisir4672 11 ай бұрын

Okay did I miss something , does normally on mean when it floating upright the contacts are touching and it's a closed switch?, And the pump goes on? Normally off means it goes on when it goes upside down, that's like the most important info of all.....I need to buy one that makes the pump go on when it's going downward and the water level is low so it turns on and fills the tank back up. Nothing in this helps me know what it's called

@Tameson 11 ай бұрын

Normally open (NO) float switch: The electrical circuit within the switch remains open when the switch is at the bottom and closed in the ‘up’ position. So, the switch is open with gravity pulling it down and closes as the liquid level rises to the pre-set level. Normally closed (NC) float switch: The electrical circuit within the switch remains closed when the switch is at the bottom and open in the ‘up’ position. So, the switch is closed with gravity pulling it down and opens as the liquid level rises to the pre-set level. You can check more details in the article: tameson.com/pages/float-switch

@ummafatemaratri471 3 жыл бұрын

Very helpful news

@Tameson 2 жыл бұрын

Glad you think so!

@kabirislam5326 3 жыл бұрын

Very excellent

@Tameson 2 жыл бұрын

Thank you! Cheers!

@trileobayu2023 3 жыл бұрын

how long is the warranty? how long it is safe from water, I am worried about the cable that drowns into the water. Will the water get inside over time?

@Tameson 3 жыл бұрын

We offer a 2 year warranty on manufacturing defects for all products. View terms here: tameson.com/terms-and-conditions.html

@trileobayu2023 3 жыл бұрын

@@Tameson wow that's great

@sohailjanjua123 2 жыл бұрын

Hi, I like your video. Thanks

@Tameson Жыл бұрын

Thank you too.

@fos8524 2 жыл бұрын

Can you run a switch like that with 12V?

@Tameson 2 жыл бұрын

Yes, these switches are also suitable for 12v applications.

@djnayeem7855 3 жыл бұрын

Verry nice

@Tameson 2 жыл бұрын

Thanks

@offgreed7131 2 жыл бұрын

Can it work on DC? Would you need a relay?

@Tameson 2 жыл бұрын

Hello! Yes, float switches work over both AC and DC.

@offgreed7131 2 жыл бұрын

Thanks a lot. I'm working on a 24v solar submersible with no controller so I guess this is the solution to turnoff when storage is full. Greatly appreciate your presentation.

@mdselim574 3 жыл бұрын

Thanks to you

@Tameson 2 жыл бұрын

Thank you!

@mdmukles8989 3 жыл бұрын

Nice video

@Tameson 2 жыл бұрын

Thanks

@austinosie2697 9 ай бұрын

How can I connect float swith to inbuilt submisble sollar pump

@Tameson 9 ай бұрын

To ensure proper installation, you will need to connect the float switch to the control box of your solar pump system. The float switch typically has two wires: one that connects to the power supply and the other to the pump controller. When the water reaches a certain level, the switch will trigger the pump to turn on or off accordingly.

@johnczuill1344 Жыл бұрын

but what does the yellow cylinder do?

@Tameson Жыл бұрын

Hi. The yellow cylinder is a counterweight that holds the float switch in a certain position. Based on the position of the counterweight and cable length, you can set different control levels in your tank.

@jamesorchard3163 5 күн бұрын

Can it withstand 150 degree water?

@Tameson 4 күн бұрын

Hi, our range of float switches can withstand maximum 60 °C temperature.

@mbsajibhossain6015 3 жыл бұрын

nice video

@Tameson 2 жыл бұрын

Thanks for the visit, please see our other videos if you liked it!

@missorthi6263 3 жыл бұрын

awesome vaiya

@Tameson 2 жыл бұрын

Thank you so much 😀

@noorashraf_rohanrohan7613 Жыл бұрын

Can you provide us canadian market diller and in bangladesh market diller. And about price in us doller

@Tameson Жыл бұрын

Hello, Tameson is online store and we do not have dealers. You can order all our products online: shop.tameson.com/

@davidmukege6967 3 жыл бұрын

Make it longer, how are r The float switches connected

@Tameson 2 жыл бұрын

We are working on a new video, stay tuned!

@tamimiqbal738 3 жыл бұрын

Nice.. voice bro. What is Your Name of your country

@Tameson 2 жыл бұрын

Thanks - Tameson is a company in the Netherlands.

@CynicAtheist 2 ай бұрын

ANSI 71?

@Tameson Ай бұрын

Our float switches are liquid level switches but they are not certified according ANSI 71. You can check all details in our article: tameson.com/pages/float-switch

@griffingrendel9911 Жыл бұрын

None sense tutorial, what I only understand is it detect water level

@Tameson Жыл бұрын

Hi. Thank you for your comment. This video shows basic working principles and explanations for the float switches. If you need any additional information you can visit our website or contact our support for help.